Green Car Congress

AUGUST 13, 2022

Lian, the principle investigator of the project, will be joined by collaborators Rahul Rahul, Rensselaer Polytechnic Institute; Suvranu De, Florida A&M University-Florida State University; Lu Cai, Idaho National Laboratory Program; Patrick Shower, GE Global Research Center; and Eric Brown, US Army Benét Laboratory.

Molten Salt 170

Molten Salt Florida Idaho Universal 170

Green Car Congress

FEBRUARY 12, 2018

The US Department of Energy (DOE) announced up to $35 million for 24 projects to support early-stage, innovative technologies and solutions in advanced manufacturing. manufacturers that could improve their competitiveness and enhance their energy efficiency. Advanced Manufacturing Awards. Organization. DOE Funding.

Manufacturer 150

Manufacturer Waste Universal Dallas 150

Green Car Congress

SEPTEMBER 28, 2015

Nano-structured steel materials design company NanoSteel ( earlier post ) introduced its first powders designed for the binder jet 3D printing process and its initial commercial application in additive manufacturing. J-11 is designed for extreme wear low-impact applications.

Manufacturer 150

Manufacturer Idaho 2002 Parts 150

Green Car Congress

APRIL 21, 2016

Designed to provide automakers with a new standard in material performance, the sheet steel is poised to accelerate vehicle lightweighting initiatives focused on affordably meeting rising global fuel-economy regulations. Today, R&D at NanoSteel focuses on two key product lines, automotive sheet steel and additive manufacturing powders.

Idaho 150

Idaho GM 2002 Fuel Economy 150

Green Car Congress

JUNE 21, 2016

At an event in Washington, President Obama announced that the Smart Manufacturing Leadership Coalition (SMLC) will lead the new Smart Manufacturing Innovation Institute, in partnership with the Department of Energy. The Smart Manufacturing Innovation Institute is the ninth manufacturing hub awarded by the Obama Administration.

Manufacturer 150

Manufacturer Los Angeles Oregon Connecticut 150

Green Car Congress

OCTOBER 6, 2022

According to Crabtree, the Battery Data Genome will collect and house data from every step of the battery lifecycle, from discovery to development to manufacturing and all manner of deployments.

Batteries 284

Batteries Battery Energy Storage Idaho 284

Green Car Congress

JULY 10, 2019

Concentric Ring Gas Atomization Die Design for Optimized Particle Production, $150,000 Praxair, Indianapolis, Ind. Extension of Core Restrain Design Code NUBOW-3D to Lead Cooled Fast Reactor Systems, $75,000 Westinghouse Electric Company, Cranberry Township, Pa. Idaho National Laboratory. Selected Labs and Partners.

Commercial 247

Commercial San Jose San Francisco San Diego 247

Green Car Congress

MAY 20, 2016

The strength properties enable the design of parts with thinner gauges that reduce weight and the formability properties enable component designs with unique geometries for increased stiffness. Its primary focus is proprietary alloys for use as sheet steel in automotive lightweighting applications.

Idaho 150

Idaho 2002 Grant GM 150

Green Car Congress

NOVEMBER 18, 2009

Specifically, the funding will go toward reducing the production cost of carbon fiber manufacturing, to help in reducing the weight of vehicles; improved efficiency and lower costs for car batteries; and net-zero energy building technologies. The Department of Energy solicited applications from eligible National Laboratories nationwide.

Carbon Fiber 199

Carbon Fiber Carbon Building Manufacturer 199

Green Car Congress

DECEMBER 11, 2020

H2NEW includes National Renewable Energy Laboratory and Idaho National Laboratory as co-leads, and focuses on R&D to enable affordable, durable and efficient large-scale electrolyzers, which produce hydrogen from electricity and water (at both high and low temperatures).

Hydrogen 321

Hydrogen Fuel Low Cost Idaho 321

Green Car Congress

JUNE 22, 2016

Topic Area 2: Cooperative development projects between a lab and industry partner(s), designed to bolster the commercial application of a lab developed technology. Manufacturing Of Advanced Alnico Magnets for Energy Efficient Traction Drive Motors. Transportation-related TCF Awards. Technology. National Lab. Carpenter Powder Products.

Commercial 150

Commercial Idaho Energy Lithium Ion 150

Green Car Congress

SEPTEMBER 19, 2009

gas-cooled reactor with commercial manufacturing, hydrogen production, and. Announcement (FOA) for up to $40 million to support cost-shared design and. research and development, conceptual design, and development of licensing. Phase 2 comprises detailed design, license review, and. Idaho National Laboratory.

Design 210

Design Industrial Industry Idaho 210

Green Car Congress

JULY 18, 2012

The 13 projects fall under two categories: Advanced Methods for Manufacturing (total $3 million, 4 projects) to improve the production and design efficiency of nuclear plant components including advanced concrete construction methods, near-net shape fabrication methods and joining processes that can be used in small modular reactor manufacturing.

Energy 225

Energy Idaho Massachusetts Universal 225

Green Car Congress

OCTOBER 24, 2016

HydroGEN is being launched as part of the Energy Materials Network (EMN) that began in February of this year, crafted to give American entrepreneurs and manufacturers a competitive edge in the global development of clean energy in support of the President’s Materials Genome Initiative and advanced manufacturing priorities.

Water 150

Water Hydrogen Production Green 150

Baua Electric

MAY 2, 2024

The majority of these semiconductor chips will be designated for export, the company’s India managing director Anand Ramamoorthy has said. The company, headquartered in Idaho, has a global workforce of over 40,000 people, with approximately 4000 employees at its research and development centres in Hyderabad and Bengaluru.

India 52

India Auto Idaho Global 52

Green Car Congress

DECEMBER 6, 2021

A new technology for rare-earth elements chemical separation has been licensed to Marshallton Research Laboratories , a North Carolina-based manufacturer of organic chemicals for a range of industries. —Kevin Lyon, INL chemical engineer who tested and developed the process design for the licensed technology.

Waste 170

Waste North Carolina Industrial Industry 170

Green Car Congress

OCTOBER 28, 2022

Travertine will develop the design basis for a 1 ton/day CO 2 removal system to demonstrate the technical feasibility and commercial viability of this concept, taking it from proof-of-concept to field-ready. Idaho National Laboratory.

Supplies 345

Supplies Ni-Li Carbon Universal 345

Green Car Congress

JANUARY 9, 2013

CMI will leverage these existing research programs into a larger, coordinated effort designed to eliminate materials criticality as an impediment to the commercialization of clean energy technologies. CMI, headquartered at Ames Laboratory, will be directed by Alex King, currently the director of Ames Lab.

Universal 332

Universal Idaho Iowa Davis 332

Green Car Congress

MAY 21, 2010

Idaho State University - $650,000. The research program is focused on the key technology challenges for these concepts and supports cross-cutting activities, including Modeling and Simulation, Structural Materials, Energy Conversion, Nuclear Instrumentation and Control, and Innovative Manufacturing Approaches.

Universal 186

Universal Las Vegas Wisconsin North Carolina 186

Green Car Congress

JUNE 6, 2013

A Honda Civic hybrid retrofitted with lead-carbon UltraBattery modules ( earlier post ) (provided by East Penn Manufacturing) has recorded more than 100,000 miles (161,000 km) of courier duty in the local area of Phoenix, AZ. Japan (Furakawa) and East Penn Manufacturing Co., East Penn).

Lead Acid 223

Lead Acid Civic Hybrid Fleet Miles 223

Green Car Congress

NOVEMBER 30, 2017

The RP also provides a standardized test stand (first up to WPT 2 power levels) which gives both electric vehicle manufacturers and infrastructure companies a means for testing performance and validation of products and new developments. Thereafter, the standard will be released. Schneider et al. Click to enlarge. WPT 1-3 (3.7-11 Kamichi, K.,

Charging 170

Charging Connect Connected Convert 170

Green Car Congress

MARCH 11, 2016

For Round 1, the small businesses and laboratories will collaborate on advancing a number of clean energy technologies, including water, wind, bioenergy, solar, buildings, vehicles, fuel cells, geothermal technologies, and advanced manufacturing. Advanced Manufacturing. Organization. Description. Big Delta Systems, working with ANL.

Clean 150

Clean Cleaning Energy Li-ion 150

Green Car Congress

JUNE 7, 2012

Research projects will also develop new processes and computational design methods to develop these materials, improve efficiency and reduce the costs of cleaner power generation systems. Brown University will study the feasibility of two-layer air plasma-sprayed TBCs that will improve their durability, manufacturability and affordability.

Coal 250

Coal Universal Indiana Tennessee 250

Cars That Think

DECEMBER 30, 2022

Modular Nuclear Power is Nucleating Korean manufacturer Doosan is set to start producing components of what could be the world’s first modular nuclear power plant, in late 2023. The components are for startup NuScale , whose design promises to drastically reduce cost and installation time.

Engine 122

Engine San Francisco Iceland Wind 122

Green Car Congress

MAY 13, 2020

Researchers at the Department of Energy’s Oak Ridge National Laboratory are refining their design of a 3D-printed nuclear reactor core, scaling up the additive manufacturing process necessary to build it, and developing methods to confirm the consistency and reliability of its printed components.

Idaho 417

Idaho United States Building Manufacturer 417

Green Car Congress

AUGUST 13, 2009

The consortium includes the Idaho National Laboratory of the Department of Energy (DOE), two top US universities, and materials technology firm Media & Process Technology. Phase 2 will cover design, construction and operation of a pilot demonstration facility. OriginOil, Inc., Carbon Sciences, Inc.,

Grant 186

Grant Carbon Fuel CO2 186

Green Car Congress

DECEMBER 21, 2021

The Mack LR Electric may be fitted with equipment bodies from numerous manufacturers based on the unique needs of the customer. TEC Equipment Fontana, California, and Northwest Equipment Sales in Boise, Idaho, were the first two Mack dealers to achieve Certified Electric Vehicle Dealer status.

Production 432

Production North Carolina New York City Idaho 432

Green Car Congress

JULY 21, 2016

Promote a robust market for vehicle manufacturers, utilities, equipment service providers, and support industries that ensures a consistent user experience, customer choice, and allows for a streamlined permitting process. Enhance American manufacturing competitiveness, innovation, and the development of advanced technology.

Obama 150

Obama Charging Financing DC 150

Green Car Congress

JULY 10, 2010

Applications are sought that use new materials and designs that allow better heat transfer out of the capacitor to reduce internal heating problems and increase life expectancy. Grant applications must show that the concept(s) can be cost-effectively incorporated into the high-rate, high volume manufacturing of commercial passenger vehicles.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

OCTOBER 22, 2020

There is also possibility to have specific designs for captive fleets; as described in SAE J2954, in this case a GA would only be expected to fully operate with a specific group of vehicles. First paired GAs and VAs provided by the same manufacturer—a so-called “matched subsystem” was tested. Proven interoperability.

Standards 544

Standards International Charging Grid 544

Green Car Congress

JUNE 19, 2009

In volume production, FCVs are expected to be cost competitive with other advanced vehicles, and are approaching the cost of advanced hybrid system even with current designs and high costs of materials. In assessing a transition to hydrogen fuel cell vehicles, the National Research council estimated it would cost $2.2 Earlier post.).

Hydrogen 150

Hydrogen Fuel California Vehicles 150

Green Car Congress

JUNE 26, 2021

The US Department of Energy (DOE) announced more than $30 million in federal funding, matched by more than $35 million in private sector funds, for 68 projects that will accelerate the commercialization of promising energy technologies—ranging from clean energy and advanced manufacturing, to building efficiency and next-generation materials.

Commercial 170

Commercial Energy Albuquerque New York 170

Green Car Congress

APRIL 22, 2016

Electric fuel cost is a fraction of gasoline or diesel fossil fuel cost, even at a time when petroleum prices are temporarily reduced due to geopolitical manipulations and manufacturing costs. 15 ] Electric power grids are designed with capacity to serve the highest power peaks demanded (e.g. 3 ] PHEVLER - EAA-PHEV Wiki. [

Clean 150

Clean Cleaning Future Green 150

Green Car Congress

JULY 31, 2017

The US DOE has selected four new projects designed to overcome technical hurdles in reducing the weight of vehicle components. If lighter materials can be manufactured at better cost with enhanced energy efficiency, it will speed up their adoption into vehicles. DOE will provide $1.2

Carbon Fiber 150

Carbon Fiber Vehicles Idaho Carbon 150

Green Car Congress

JULY 26, 2017

Aided by colleagues at ORNL’s Manufacturing Demonstration Facility and the National Transportation Research Center, Rios’ team cast the Al-Ce cylinder head using 3-D–printed sand molds and retrofitted the component to a prototype engine designed specifically for VULCAN.

Engine 150

Engine Idaho Fuel Economy Industrial 150

Cars That Think

JANUARY 15, 2023

Why, after all, would an ambitious nuclear reactor designer want to go small? Once the manufacturing process scales up—if it ever scales up—SMR-makers hope to be able to fabricate their components in a single factory, ship them out, and have them assembled on-site like flatpack fission furniture. startup NuScale.

Future 109

Future Russia Waste Energy 109

Green Car Congress

OCTOBER 5, 2020

Jervois currently is a cobalt company with nickel and copper exposure, with mining assets in Idaho, Uganda, and Australia. Jervois intends for the SMP acquisition to transform it into a vertically integrated producer when the Idaho Cobalt Operations (ICO) commences commercial production. million (US$4.5 million (US$6.75 Background.

Idaho 259

Idaho Brazil Lithium Ion Australia 259