Green Car Congress

MAY 6, 2021

The main products of the e Autopos brand currently include high-strength steel plates for automotive bodies and chassis, steel for battery packs, energy-efficient steel plates for motors, metal separators for hydrogen EVs, and cathodes & anodes for secondary battery materials. Accordingly, POSCO developed ‘self-bonding’ technology.

Green 243

Green Motor Motors Motoring 243

Green Car Congress

MARCH 14, 2017

By replacing 45 steel parts with two molded and four metallic parts, the prototype subframe achieves an 87% reduction in the number of parts. The moldings are joined by adhesive bonding and structural rivets.

Carbon Fiber 247

Carbon Fiber Carbon Ford Shelby 247

Green Car Congress

JULY 10, 2019

DOE received more than 160 applications for 2019 TCF funding, with project teams engaging more than 90 different partners across multiple diverse disciplines. Development of RF cured nanocomposite adhesives for thermal-budget reduction in adhesive bonding processes, $150,000 Mitsubishi Chemical America Inc., Tempe, Ariz.

Commercial 247

Commercial San Jose San Francisco San Diego 247

Green Car Congress

MARCH 31, 2014

Scanning electron microscope image shows vertical polythiophene nanofiber arrays grown on a metal substrate. The material has been tested up to 200 °C, a temperature that could make it useful for applications in vehicles. Credit: Virendra Singh. Click to enlarge. —Baratunde Cola. Li Shi, Annie Weathers, Kedong Bi, Micheal T.

Polymer 230

Polymer Georgia Austin Texas 230

Green Car Congress

SEPTEMBER 25, 2014

Using the same alloy for various applications facilitates recycling in a manufacturing environment and increases the value of the scrap with respect to process and end-of life, from which, without further segregation, new aluminum sheets can be casted and rolled.

Kentucky 257

Kentucky North America Cleveland America 257

Green Car Congress

AUGUST 2, 2013

This introduces oscillating shear forces at the interface between two metals, causing elastoplastic deformation at the interface. This ultimately results in a structure similar to that of a diffusion weld that does not require melting-point temperatures or joining material such as adhesives, soldering or fasteners. Cai, Jeffrey A.

Cadillac 223

Cadillac Batteries Battery Detroit 223

Green Car Congress

APRIL 18, 2011

For the first time at the event, Evonik Industries will demonstrate a wide range of applications for cars at the 14 th Shanghai International Automobile Industry Exhibition (Auto Shanghai 2011) from April 21 to 28 in Shanghai, China. Evonik also provides solutions for tires, tubing systems and powertrain.

2011 210

2011 Auto Carbon Vehicles 210

Green Car Congress

FEBRUARY 12, 2018

These low density steels are expected to generate energy savings by bringing efficiencies in the steel manufacturing and lifetime savings by use of lightweight steel in automotive structural applications. The initial application is to improve adhesive joint performance in lightweight vehicle construction. University of Maryland.

Manufacturer 150

Manufacturer Waste Universal Dallas 150

Green Car Congress

AUGUST 2, 2016

The roadmap also identifies technical gaps in the application of these advanced products and on a high level identifies potential projects. This classification of steel has been named third generation (3rd Gen AHSS) and is expected to provide a cold-stamped alternative for some hot-stamped applications through traditional stamping processes.

Fuel Economy 150

Fuel Economy Economy Future Parts 150

Green Car Congress

SEPTEMBER 4, 2013

This project will develop heat-generating foils to provide strong and stable bonds between aluminum alloys, magnesium alloys, and steels. his project will develop and demonstrate vapor- assisted collision welding of dissimilar metals. General Motors. Johns Hopkins University. 595,520 (jointly funded). Chrysler Group. ?This 3M Company.

Lithium Ion 210

Lithium Ion Transportation Universal Fuel Economy 210

Green Car Congress

FEBRUARY 2, 2013

When the final funding opportunity announcement is released following this public comment period, DOE will accept applications from industry, national laboratories, and university-led teams to address these challenges and enable technologies that drive innovation in vehicle design. Lubricant Formulations to Enhance Fuel Efficiency.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Cars That Think

APRIL 8, 2023

They are used in high-speed optical transceivers that link server racks in data centers, including the one used to deliver the IEEE Spectrum website, in lidars to keep self-driving cars on track, and in spectrometers to spot chemicals in the atmosphere, among many other applications. The solder is then melted, bonding the chip to the package.

Light 138

Light Engine Manufacturer Belgium 138

Baua Electric

APRIL 16, 2024

All of the live sessions will be recorded and available to view after the broadcasts. The recorded videos can be accessed on each session’s registration page.

Engine 52

Engine Charging Lithium Ion Polymer 52

Green Car Congress

MAY 16, 2014

Polymers are long chains of molecules connected through chemical bonds. Although now ubiquitous in myriad applications, today’s polymer materials are limited in some ways. They are ideal for high-temperature electronic or automotive applications, but cannot be reprocessed or recycled either by melting or by solution processing.

Polymer 275

Polymer Industrial Industry Saudi Arabia 275

Green Car Congress

JULY 22, 2015

The treated bubbles also help with paint adhesion and bonding characteristics. This is a great example of how Chevrolet is continually looking for innovations that improve performance on Corvette, and could benefit possible future applications. SPg), and 35% over its industry-proven standard TCA material (1.9

GM 150

GM Chevrolet 2016 2014 150

Cars That Think

OCTOBER 1, 2021

Since its introduction in 1978, Master Bond EP29LPSP has been the epoxy compound of choice in a variety of challenging applications. This low viscosity compound is easy to apply and bonds well to metals, glass, ceramics, and many different plastics. If an adhesive, coating, or potting compound fails, the product fails.

Engine 63

Engine 2000 Stimulus Wind 63

Green Car Congress

JULY 30, 2013

And the application of the lightweight design strategy also extends to screws and bolts made from aluminium. One reason for this is the elimination of the metal stamping process for body components (due to the use of the CFRP passenger cell) and the elimination of the painting phase of production. Production.

BMW 247

BMW New York London Production 247

Green Car Congress

JULY 14, 2015

After sugar extraction, remaining lignin solids can be burned to supply the bulk of the heat energy required for the process (or utilized in higher-value applications like adhesives or thermoplastics). This new technology is waste-free and metal-free. Additionally, condensation reactions are often mediated by metals.

EPA 150

EPA Green Polymer Water 150

Cars That Think

SEPTEMBER 1, 2021

Each jelly-roll cell packs in more active battery material, and less wasted space in metal casing. Munro further estimates Tesla's redesigned pack, including adhesive bonds between cells and modern welding techniques, will reduce steel use by 30 to 40 percent. Yet this "bigger can" brings big benefits.

Batteries 143

Batteries Battery Production Tesla 143

Get Electric Vehicle

MAY 21, 2023

Depending on the application, other variations can offer the ideal trade-off. Alternative combinations, such as Nickel-Metal Hydride (NiMH), which has a little better lifetime, are occasionally used. Typically, laser welding or ultrasonic bonding is used to make these connections.

Design 40

Design Batteries Battery Li-ion 40