Green Car Congress

SEPTEMBER 20, 2016

Cooper Tire & Rubber Company, working as the lead agency in the grant, announced that its scientists have reached a key milestone toward the goal of producing, by mid-2017, a concept tire in which all of the natural and synthetic rubber is replaced by guayule-based polymers. Earlier post.). The results are highly promising.

Polymer 150

Polymer Grant United States 2017 150

Green Car Congress

DECEMBER 22, 2020

The automotive and commercial vehicle industries are investing heavily in fuel cell technology as a solution to meet low- and zero-emission government regulations, but current compressed gas storage systems are big, heavy and inefficient. It features a tank with a polymer liner, woven reinforcement and protective outer shell.

Gas 311

Gas Hydrogen Polymer Mariner 311

Green Car Congress

APRIL 13, 2021

Artist’s concept of a heavy-duty vehicle equipped with high-temperature proton exchange membrane (HT-PEM) fuel cells. As the heavy-duty transportation industry seeks greener alternatives to combustion engines, HT-PEM fuel cells promise a clean, efficient alternative.

Fuel 468

Fuel Hydrogen Water Polymer 468

Green Car Congress

APRIL 9, 2020

A consortium led by the Fraunhofer Research Institution for Materials Recycling and Resource Strategies IWKS and including Proton Motor Fuel Cell GmbH, MAIREC Edelmetallgesellschaft mbH, Electrocycling GmbH and KLEIN Anlagenbau AG, is developing a closed-loop recycling concept specifically for PEM fuel cells. Example of a fuel cell stack.

Fuel 243

Fuel Polymer Hydrogen Design 243

Green Car Congress

SEPTEMBER 18, 2014

Citroën will unveil its new C4 Cactus AIRFLOW 2L concept at the Paris Motor Show. The C4 Cactus AIRFLOW 2L project was conducted as part of the “2l/100 km vehicle” program set up by the Plateforme de la Filière Automobile, an industry group. With the C4 Cactus AIRFLOW 2L concept, Citroën went further. Hybrid Air. Lighter weight.

Concept 290

Concept Hybrid Parts Carbon 290

Green Car Congress

SEPTEMBER 28, 2021

Proton exchange membrane (PEM) electrolyzers use a solid polymer electrolyte, and alkaline electrolyzers use an electrolyte solution, such as potassium hydroxide or sodium hydroxide mixed with water. This green hydrogen is a carbon-free fuel source that can be used in a variety of applications and industries.

Hydrogen 333

Hydrogen Davis Sodium Green 333

Green Car Congress

FEBRUARY 18, 2020

As part of a larger £90 million (US$117 million) package of awards to cut carbon emissions in industry and homes, the UK is awarding £28 million (US$36.5 The concept consists of a large-scale floating wind turbine (nominally 10 MW) with an integrated water treatment unit and electrolyzers for localized hydrogen production.

Hydrogen 386

Hydrogen Carbon Production Wind 386

Green Car Congress

APRIL 12, 2020

Therefore, the concept of IL-contained quasi-solid-state electrolytes was explored. The researchers combined a garnet-type ceramic, a polymer binder, and an ionic liquid, producing a quasi-solid-state sheet electrolyte. To solve this issue, co-sintering of cathode materials, e.g., LiCoO 2 (LCO), and LLZO powders was proposed.

Li-ion 459

Li-ion Batteries Battery Production 459

Green Car Congress

SEPTEMBER 14, 2015

Dr. Martin Winterkorn said that “ The Porsche Mission E and the Audi e-tron quattro concept are nothing less than a quantum leap for our industry ”—both vehicles have an all-electric range of 500 kilometers (311 miles). The Audi e‑tron quattro concept sprints from a standstill to 100 km/h (62.1 Total output is 320 kW.

Concept 150

Concept Audi Porsche Plug-in 150

Baua Electric

MAY 18, 2024

The US Department of Energy (DOE) is hoping Argonne Nat’l Lab’s extensive fuel cell research experience, which dates back to 1996, will give it unique insights as it evaluates new polymer electrolyte membrane (PEM) fuel cell systems ranging from 150 to 600 kilowatts for use in industrial vehicle and stationary power generation applications.

Hydrogen 52

Hydrogen Vehicles Mariner Polymer 52

Green Car Congress

JULY 25, 2021

Eastman is collaborating with the United States Automotive Materials Partnership LLC ( USAMP ) and automotive recycler PADNOS for a concept feasibility study to demonstrate a closed-loop project to recycle automotive-industry mixed plastic waste in the automotive supply chain. —Steve Zimmer, executive director of USCAR.

Market 170

Market Waste United States General Motors 170

Green Car Congress

JUNE 19, 2019

The study has revealed that fiber-reinforced polymer components with structural foam ribbing and reinforcements can save more than 40 kg of weight per car vs. conventional all-metal designs. Each design is fully engineered and optimized for all pertinent crash load cases according to customer specifications and applicable industry standards.

International 191

International Parts Hybrid Polymer 191

Green Car Congress

APRIL 18, 2018

The EMN consortia have been established to make unique, world-class capabilities at the national laboratories more accessible to industry, facilitating collaborations that will expedite the development and manufacturing of advanced materials for commercial markets. Topic 3: Innovative Concepts. A/mg PGM at 0.1

Hydrogen 231

Hydrogen Fuel Polymer Concept 231

Green Car Congress

OCTOBER 1, 2014

Volkswagen XL Sport concept. On the evening before the Paris Motor Show, the Volkswagen Group presented not only the production-bound Passat GTE plug-in hybrid ( earlier post ), but also staged the world premiere of the XL Sport—a highly efficient sports car concept based on Volkswagen’s XL1 diesel plug-in hybrid ( earlier post ).

Plug-in 309

Plug-in Concept Plug Power 309

Green Car Congress

JUNE 15, 2021

In September 2020, Airbus unveiled three hydrogen-fueled concepts for the world’s first zero-emission commercial aircraft which could enter service by 2035. The design and integration of tank structures is crucial to the performance of a future hydrogen aircraft.

France 170

France Germany Emissions Hydrogen 170

Green Car Congress

JUNE 26, 2020

Due to environmental concerns and national as well as international regulations associated with fossil based HFOs, there is a considerable need for cleaner, renewable and economic alternatives for the maritime industry.

Mariner 273

Mariner Oil Fuel Cleaner 273

Green Car Congress

OCTOBER 14, 2016

Hyundai Motor unveiled the RN30 high-perfromance concept at the Paris Motor Show in September. The RN30, jointly developed by BASF and Hyundai Motor Company, combines key solutions from the chemical industry with purposeful aerodynamic design and specialized high-performance technologies.

Hyundai 150

Hyundai Concept Motor Motors 150

Green Car Congress

APRIL 29, 2011

Evonik, three other industrial partners (Johnson Controls GmbH, Jacob plastics GmbH and Toho Tenax Europe GmbH) and the University of Aachen (Institute for textile technology [ITA] and Automotive Institute [IKA]) are developing a novel lightweight construction concept for auto bodies that partially replaces both steel and lightweight metals.

Polymer 255

Polymer Concept Carbon Cars 255

Green Car Congress

JANUARY 13, 2021

SCALEUP awardees will focus on further developing existing technologies, for which the proof-of-concept R&D challenges have been addressed, that can establish real-world impact through scaling. High-Throughput Manufacturing of Breakthrough Polymer Electrolyte to Enable Low-Cost Solid-State Batteries - $8,000,000.

Li-ion 199

Li-ion Batteries Battery Polymer 199

Green Car Congress

OCTOBER 2, 2015

In the wake of the 1977 Tenerife airport disaster (583 killed in a post-crash fireball), researchers looked into the possibility of using ultralong, associative polymers as a fuel additive to increase the drop diameter in the post-impact mist, thereby limiting the event to a relatively cool, short-lived fire.

Fuel 150

Fuel Polymer Design Diesel 150

Green Car Congress

NOVEMBER 16, 2018

Novel Polymer-enhanced Rechargeable Aluminum-Alkaline Battery Technology – $2,000,000. At the center of Ionic Materials’ innovation is a new polymer-based material that suppresses the formation of unwanted chemical products that prevent aluminum-alkaline batteries from recharging. Ionic Materials, Inc.

Engine 247

Engine San Diego Polymer Lithium Ion 247

Green Car Congress

FEBRUARY 13, 2014

Encourage the creation of a new domestic bioenergy industry supporting the Energy Independence and Security Act of 2007 goal of 36 billion gallons per year of renewable transportation fuels by 2022. Bio-hydrocarbons Bio-hydrogen Bio-polymers Biomass Biorefinery Fuels' EERE plans to issue the FOA on or about 24 February 2014.

IDEA 225

IDEA Polymer 2013 Renewable 225

Green Car Congress

APRIL 4, 2014

Poplar trees are a fast-growing wood crop widely planted throughout the United States and Canada, and are particularly valuable to the bioenergy, bio-products, and fiber industries. A paper on their work appears in the journal Science. These observations illustrate the inherent pliability of the lignification process.

Engine 236

Engine Production Wisconsin Polymer 236

Green Car Congress

JANUARY 30, 2011

The final product is either a fine micro-fibrous polymer mat that resembles white tissue paper, or polymer micro-beads with a diameter of ~ 0.5 - 5µm, with the hydride material entrained in ~50 - 200nm pores within the polymer. It also protects the hydrides from oxygen and water, making it possible to handle it in air.

Hydrogen 262

Hydrogen Commercial Transportation Polymer 262

Green Car Congress

MAY 16, 2014

Using a novel computational chemistry hybrid approach, scientists from IBM Research have successfully discovered a new class of polymer materials—the first new class of polymers discovered in more than 20 years—that could potentially transform manufacturing and fabrication in the fields of transportation, aerospace, and microelectronics.

Polymer 275

Polymer Industrial Industry Saudi Arabia 275

Green Car Congress

MARCH 29, 2012

Reactive processing of polymers, ceramics, and thin films. The Process and Reaction Engineering program funds research in: chemical and biochemical reaction engineering, process design and control, and reactive polymer processing. Reactive Polymer Processing. Design and optimization of complex chemical and biochemical processes.

Engine 225

Engine Polymer Design Renewable 225

Green Car Congress

SEPTEMBER 6, 2012

A multidisciplinary team of product developers, chemists and material scientists will work to discover new products for the US automotive, construction, sports and leisure industries. Applications for these highly versatile plastics include cables and tubes in the automotive, mechanical engineering and construction industries.

Ozone 210

Ozone North America Polymer Michigan 210

Green Car Congress

SEPTEMBER 3, 2020

Under this cost-shared research and development (R&D), DOE is awarding $51 million to nine new projects for coal and natural gas power and industrial sources. Many of these R&D efforts can be applied across both the energy and the industrial sectors. AOI 1 (Subtopic 1.1): CO 2 Capture and Compression from Industrial Sources.

Carbon 236

Carbon Coal Gas-Electric Gas 236

Green Car Congress

FEBRUARY 12, 2018

The selected projects vary in levels of maturity and industry-readiness—from concept definition (focused on specific experimental proof or detailed analysis) to proof-of-concept (requiring physical experimental validation). manufacturers that could improve their competitiveness and enhance their energy efficiency.

Manufacturer 150

Manufacturer Waste Universal Dallas 150

Green Car Congress

OCTOBER 17, 2013

A composite blend of carbon fibers and polymer resin is being developed that can store and charge more energy faster than conventional batteries can. The material combines carbon fibers and a polymer resin, creating a very advanced nanomaterial, and structural supercapacitors. Click to enlarge. Qian H, Diao H, Shirshova N, et al.

Energy Storage 368

Energy Storage Volvo Carbon Fiber Energy 368

Green Car Congress

AUGUST 29, 2015

an integrated stationary fuel cell manufacturer, to develop a durable, low-cost, and high-performance electrochemical cell to convert natural gas and other methane-rich gas into methanol, a major chemical commodity with worldwide applications in the production of liquid fuels, solvents, resins, and polymers. Earlier post.)

Convert 150

Convert North Dakota Gas Fuel 150

Green Car Congress

DECEMBER 4, 2015

The Mission E battery-electric concept car made its premiere at the Frankfurt International Motor Show (IAA) in September. Porsche Mission E concept at Frankfurt. The body as a whole is made up of a functional mix of aluminium, steel and carbon fibre reinforced polymer. Earlier post.) Click to enlarge.

Porsche 150

Porsche Cars Lithium Ion Electric 150

Green Car Congress

MAY 13, 2016

The ORNL/RMX plasma processing technology is a new approach to the oxidation stage of carbon fiber production in which polymer materials are oxidized (or stabilized) before carbonization. Plasma oxidation can be used to produce all grades of carbon fiber from low-end industrial to high-end aerospace grades. Click to enlarge.

Carbon Fiber 150

Carbon Fiber Carbon Energy Production 150

Green Car Congress

JULY 17, 2020

New Two-Cylinder Prototype Demonstration and Concept Design of a Next Generation Class 3-6 Opposed Piston Engine. AOI 08: Lightweight and High-Performance Fiber-Reinforced Polymer Composites for Vehicle Applications. AOI 13: Alternative Fuel Proof-of-Concept in New Communities and Fleets. Roush Industries. Achates Power.

Lithium Ion 236

Lithium Ion Vehicles Li-ion Universal 236

Green Car Congress

MARCH 30, 2014

The engineers said the polymer craft could form the basis of cheap and potentially disposable UAVs that could be built and deployed in remote situations potentially within as little as 24 hours. Concepts for novel ducted fan designs are also being investigated. It is a partnership between industry and academia.

Engine 199

Engine Cheap Polymer Manufacturer 199

Green Car Congress

MARCH 1, 2013

In tune with the ultra-lightweight construction concept, each tank weighs 27 kilograms (59.52 Construction of the world’s first industrial plant to produce synthetic methane (e-gas) from CO 2 and renewable electricity is almost complete in Werlte (Emsland district of Lower Saxony), Germany. lb) less than its conventional counterpart.

Audi 296

Audi Gas CO2 Gas-Electric 296

Green Car Congress

MAY 31, 2018

Butterfly covers all research and development phases in the process—from scientific concepts, to the pilot phase and validation on an industrial demonstrator. MRP is easy to incorporate into new or existing formulations, is compatible with multiple polymers and provides a smooth surface appearance on finished products.

2018 199

2018 France Oil Georgia 199