Green Car Congress

JULY 19, 2022

Supernal revealed its initial eVTOL vehicle cabin concept at Farnborough International Airshow, providing the first look at how Hyundai Motor Group is integrating automotive capabilities to develop the Advanced Air Mobility (AAM) market. —Jaiwon Shin, President of Hyundai Motor Group and CEO of Supernal. —Jaiwon Shin.

Hyundai 221

Hyundai Concept International Motor 221

Green Car Congress

MAY 13, 2016

RMX Technologies and the Department of Energy’s Oak Ridge National Laboratory have signed an exclusive licensing agreement for a new technology that significantly reduces the time and energy needed in the production of carbon fiber. Oxidation is the most time-consuming phase of the multistep carbon fiber conversion process.

Carbon Fiber 150

Carbon Fiber Carbon Energy Production 150

Green Car Congress

MARCH 8, 2016

Continental Structural Plastics (CSP) has signed a memorandum of understanding with Mitsubishi Rayon (MRC), regarding the development and manufacturing of innovative carbon fiber structural components for the automotive industry in North America. Also key was reducing the cycle time associated with the use of carbon fiber.

Carbon Fiber 150

Carbon Fiber Carbon Mitsubishi North America 150

Green Car Congress

MARCH 9, 2011

Teijin Limited has achieved a significant reduction in the cycle time required for molding carbon fiber reinforced plastic (CFRP) automobile cabin frame, bringing it to less than one minute. Long-fiber thermoplastic pellet: high-strength pellet made from carbon fiber, suited for injection molding of complex parts.

Carbon Fiber 199

Carbon Fiber Carbon Automobile Concept 199

Green Car Congress

NOVEMBER 30, 2011

Teijin Limited will establish the first pilot plant for fully integrated production of carbon fiber reinforced thermoplastic (CFRTP) components from carbon fiber on the premises of its Matsuyama Factory in Ehime Prefecture, Japan.

Carbon Fiber 199

Carbon Fiber Carbon Production Automobile 199

Revenge of the Electric Car

APRIL 12, 2010

2009 BMW Concept ActiveE. BMW MegaCity Urban Electric Car To Be Built of Carbon Fiber. First, the raw feedstock to make carbon fibers–just call it a “polacrylonitrile-based precursor&# –is made in Japan by a joint venture between SGL and Mitsubishi Rayon and flown to the U.S. April 7th, 2010.

Carbon Fiber 133

Carbon Fiber BMW Carbon Mitsubishi 133

Green Car Congress

JANUARY 24, 2020

This investment will support transformational research and development (R&D), innovative hydrogen concepts that will encourage market expansion and increase the scale of hydrogen production, storage, transport, and use. Concept papers are due 25 February 2020 and full applications are due 20 April 2020.

Market 207

Market Carbon Fiber Hydrogen Energy Storage 207

Green Car Congress

AUGUST 20, 2021

Featuring a lightweight, ultra-strong monocoque carbon fiber frame, the CrownCruiser e-bike comes with a rider recognition anti-theft defense, GSM location tracking, and Bluetooth, complimented by a powerful app that tracks riding statistics. UK-based CrownCruiser Motors has unveiled its eponymous e-bike on Indiegogo.

Carbon Fiber 259

Carbon Fiber MPH New York Europe 259

Green Car Congress

APRIL 6, 2010

SGL Automotive Carbon Fibers LLC, the joint venture between SGL Group and BMW Group ( earlier post ), will build a carbon fiber manufacturing plant in Moses Lake, WA. In the next step, the facility in Moses Lake will convert the polyacrylic fibers into the actual carbon fibers.

Carbon Fiber 220

Carbon Fiber BMW Carbon Building 220

Green Car Congress

OCTOBER 30, 2009

SGL Group and BMW Group have formed a 51:49 joint venture to manufacture carbon fibers and fabrics for the automotive industry. The joint venture will be operated through two companies, one based in North America (SGL Automotive Carbon Fibers LLC), and the other in Germany (SGL Automotive Fibers GmbH & Co KG).

Carbon Fiber 186

Carbon Fiber BMW Carbon Mitsubishi 186

Green Car Congress

JUNE 4, 2014

Ford Lightweight Concept. Ford Motor Company unveiled its Lightweight Concept vehicle, which uses advanced materials to explore future weight-reduction solutions that could improve performance and fuel efficiency while reducing CO 2 emissions. 19” by 5” carbon fiber wheels. 19” by 5” carbon fiber wheels.

Carbon Fiber 225

Carbon Fiber Light Concept Ford 225

Green Car Congress

OCTOBER 22, 2020

Teijin has joined the AZL Partner Network for Lightweight Production Technology , a cross-industry network for joint business development and technology development organized by service and engineering provider AZL Aachen GmbH and involving nine institutes and some 80 companies in the field of lightweight production. © AZL Aachen GmbH.

Czech Republic 221

Czech Republic Production Carbon Fiber Portugal 221

Green Car Congress

DECEMBER 17, 2019

H2@Scale supports innovations to produce, store, transport, and utilize hydrogen across multiple sectors, covering collaborations between various industry stakeholders and national laboratories. Advanced Carbon Fiber for Compressed Hydrogen and Natural Gas Storage Tanks. Earlier post.) Fuel Cell R&D for Heavy-Duty Applications.

Market 195

Market Carbon Fiber Hydrogen Mariner 195

Green Car Congress

OCTOBER 29, 2014

the core company of the Teijin Group’s carbon fibers and composites business, has developed a new technology—Tenax Part via Preform (PvP)—for highly efficient production of thermoset carbon fiber-reinforced plastic (CFRP). Toho Tenax Co.,

Carbon Fiber 218

Carbon Fiber Production Carbon Waste 218

Green Car Congress

APRIL 13, 2016

At the 2016 SAE World Congress, Toyota and Clemson University unveiled an innovative, flexible concept called uBox that is intended to appeal to the next generation of car buyers: Gen-Z. The roof pultrusion was something unexpected and very interesting when they first started talking about the concept.

Congress 150

Congress Toyota Concept Carbon Fiber 150

Green Car Congress

NOVEMBER 15, 2021

Kawasaki Heavy Industries, Ltd., jointly announced that, toward the achievement of carbon neutrality, they will take on the challenge of expanding fuel options through the use of internal combustion engines at the (three-hour) Super Taikyu Race in Okayama on 13-14 November. MAZDA SPIRIT RACING Bio concept DEMIO.

Mazda 387

Mazda Hydrogen Toyota Transportation 387

Green Car Congress

SEPTEMBER 8, 2014

SABIC’s LNP STAT-KON carbon fiber-reinforced compound. This project represents the unique opportunity DOE’s National Laboratory System offers to the industry, to collaborate in an open environment to deliver fast, innovative, manufacturing solutions. The winning concept, Strati, inspired the full sized 3D-printed prototype.

Motor 303

Motor Motors Motoring Carbon Fiber 303

Green Car Congress

FEBRUARY 28, 2023

—Oliver Zipse, Chairman of the Board of Management of BMW AG The BMW iX5 Hydrogen developed on the basis of the current BMW X5 was first unveiled as a concept at the IAA show in 2019. The hydrogen needed to supply the fuel cell is stored in two 700-bar tanks made of carbon-fiber reinforced plastic (CFRP). Earlier post.)

BMW 259

BMW Hydrogen Fleet Lithium Ion 259

Green Car Congress

JANUARY 31, 2013

consortium is developing a mobility concept for an efficient electric vehicle, making the design as light as possible while still delivering the best possible safety protection. The passenger compartment will be made of carbon-fiber-reinforced plastic (CFRP). A prototype vehicle on the track from the Visio.M Click to enlarge.

Light 246

Light Carbon Fiber Germany Carbon 246

Green Car Congress

MARCH 6, 2019

Teijin Limited’s automotive composites specialty groups have developed a multi-material composite automotive door concept that maintains required crash specifications while reducing overall weight by 35% when compared to a conventional steel door.

Light 191

Light Carbon Fiber Michigan 2019 191

Green Car Congress

OCTOBER 14, 2016

Hyundai Motor unveiled the RN30 high-perfromance concept at the Paris Motor Show in September. The RN30, jointly developed by BASF and Hyundai Motor Company, combines key solutions from the chemical industry with purposeful aerodynamic design and specialized high-performance technologies.

Hyundai 150

Hyundai Concept Motor Motors 150

Green Car Congress

OCTOBER 17, 2013

A composite blend of carbon fibers and polymer resin is being developed that can store and charge more energy faster than conventional batteries can. The material combines carbon fibers and a polymer resin, creating a very advanced nanomaterial, and structural supercapacitors. Click to enlarge. Click to enlarge.

Energy Storage 368

Energy Storage Volvo Carbon Fiber Energy 368

Green Car Congress

APRIL 28, 2010

Toray Industries, Inc. has signed a Joint Development Agreement (JDA) with Daimler AG to develop automobile parts made of carbon fiber reinforced plastics (CFRP). The companies aim for adoption of the newly developed parts in Mercedes-Benz models within next three years. Earlier post.)

Automobile 210

Automobile Carbon Fiber Parts Mercedes 210

Green Car Congress

NOVEMBER 18, 2016

The EMN consortia have been established to make unique, world-class capabilities at the national laboratories more accessible to industry, facilitating collaborations that will expedite the development and manufacturing of advanced materials for commercial markets. The FOA topics include: PGM-free Catalyst and Electrode R&D. A/mg PGM at 0.1

Hydrogen 150

Hydrogen Fuel Carbon Fiber Water 150

Green Car Congress

OCTOBER 31, 2013

The office encourages collaborative approaches with teaming across multiple entities including university, industry, and/or national labs with complimentary disciplines and expertise necessary for a holistic approach. 350 to 700 bar) storage vessels are constructed using expensive high-strength carbon fiber.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

APRIL 22, 2010

A Concept ActiveE is in the background. Earlier this month, SGL Automotive Carbon Fibers LLC, the joint venture between SGL Group and BMW Group, announced it will build a carbon fibre manufacturing plant in Moses Lake, WA. This vehicle will radically alter the motor industry as we know it. Click to enlarge.

Mini E 199

Mini E BMW China 2013 199

Green Car Congress

SEPTEMBER 19, 2013

In collaboration with KraussMaffei, Henkel has developed a process for the manufacture of components based on glass or carbon fiber and using high-pressure resin transfer molding (HP-RTM) technology that creates a surface quality good enough for automobile exteriors.

Carbon Fiber 186

Carbon Fiber Production Carbon Manufacturer 186

Green Car Congress

AUGUST 26, 2016

Awards made from the FOA will validate the concept, estimate the technology cost, and demonstrate that the carbon lifecycle of the products can offer a true carbon reduction. The funding opportunity announcement has three areas of interest: Biological based concepts for beneficial use of CO 2. coal, metals, etc.),

Convert 150

Convert Production Coal CO2 150

Green Car Congress

OCTOBER 9, 2012

These companies, each in their own area of expertise, play a leading role in the production and processing of fiber-reinforced thermoplastic composites, and have established a track record in the aerospace industry. The automotive industry is showing greatly increased interest in the industrial applications of light materials.

Companies 225

Companies Netherlands Carbon Fiber Industrial 225

Green Car Congress

SEPTEMBER 12, 2013

Royal DS is launching a custom-made solution for structural and semi-structural applications, incorporating various types of continuous fiber reinforcements embedded in its advanced polyamides. Together with several industry partners, DSM has developed advanced thermoplastic composites, which are initially aimed at the automotive industry.

Carbon Fiber 199

Carbon Fiber Carbon Insight Volvo 199

Green Car Congress

JUNE 20, 2015

Boeing is working with the aviation industry to approve green diesel for commercial aviation by amending the HEFA (Hydroprocessed Esters And Fatty Acids) biojet specification approved in 2011. Boeing’s Green Diesel concept, in three slides. made green diesel is another positive step toward reducing our industry’s use of fossil fuel.

Diesel 150

Diesel Green Energy 2014 150

Green Car Congress

JULY 12, 2013

GM’s fuel-economy plan through the 2016 model year focuses on a reduction in vehicle mass and aggressive investment in advanced materials, such as high-strength steel, carbon fiber and aluminum, enabled in part by our industry-first aluminum welding technology. MWh per vehicle, less than half the industry average of 2.37

GM 275

GM MPG Manufacturer 2017 275

Green Car Congress

SEPTEMBER 18, 2015

This project will utilize a systems approach to design and demonstrate an ultra-lightweight carbon fiber reinforced thermoplastic composites door assembly through the integration of unique designs, novel materials, and manufacturing technologies and joining/assembly of subsystems. PPG Industries. Area of Interest 3).

Fuel 150

Fuel Carbon Fiber Lithium Ion Vehicles 150

DIY Electric Car

JULY 11, 2017

With the technology that the automotive industry has today, it is not surprising to see cars out performing records on an annual basis. And with its carbon fiber body, it has an excellent power-to-weight ratio. Rimac Concept One. There are many reasons why the automotive industry is now switching to electric cars.

Electric Cars 140

Electric Cars Cars Electric Electrical 140

Green Car Congress

AUGUST 10, 2011

This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber. Plasan Carbon Composites. PPG Industries, Inc. . $6,000,000. Zoltek Companies, Inc. 1,485,851.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

APRIL 3, 2015

The outcome is based on analysis of three indicators: technology, industry and market. Germany is catching up quickly in terms of market, but the relative positions of the different nations remain unchanged overall for both market and industry. In terms of technology, Japan has taken over the lead again, with France in second place.

China 150

China Sale Japan France 150

Green Car Congress

FEBRUARY 5, 2010

Researchers from Imperial College London and their European partners, including Volvo Car Corporation, are developing a prototype multifunctional structural composite material composed of carbon fibers and a polymer resin which can store and discharge electrical energy and which is also strong and lightweight enough to be used for car parts.

Energy Storage 225

Energy Storage Energy Polymer Carbon Fiber 225