Green Car Congress

FEBRUARY 28, 2023

Evonik’s AEROXIDE, an aluminum oxide for ultra-thin separator coatings for the next generation lithium-ion batteries, enables longer mileage for electrical vehicles. As dry coating on the surface of cathode materials, AEROXIDE acts as a defined cathode electrolyte interface (CEI). Evonik is a leading global manufacturer of silica.

Japan 243

Japan Li-ion Lithium Ion Batteries 243

Green Car Congress

AUGUST 13, 2022

The high-temperature corrosion of molten salts presents a unique challenge for the application of structural materials. Proposed strategies include depositing metallic or ceramic coatings to improve corrosion resistance of Ni-based alloys and stainless steels in hot molten salts.

Molten Salt 170

Molten Salt Florida Idaho Universal 170

Green Car Congress

OCTOBER 14, 2022

Sylvatex (SVX) and Forge Nano signed a memorandum of understanding (MOU) for the use of Forge Nano’s proprietary atomic layer deposition (ALD) coating technology on Sylvatex proprietary cathode active materials (CAMs). —Mel Luetkens, SVX’s Chief Technology Officer.

Li-ion 199

Li-ion Lithium Ion Water North America 199

Green Car Congress

APRIL 29, 2020

Projects will specifically target gas turbine applications in the power generation and aviation industries. Gas turbines are used for a variety of applications, from aerospace engines to industrial power generation. Environmental barrier coatings and thermal barrier coatings are within the scope of this program.

Gas 269

Gas Gas-Electric Environment 2000 269

Green Car Congress

APRIL 5, 2023

The joint endeavor seeks to tackle some of the most critical challenges facing the Li-ion battery production industry: heavy carbon footprint, energy consumption, and high infrastructure cost derived from the current standard solvent evaporation process used for electrode fabrication. —Yan Wang, AMB CEO

Li-ion 199

Li-ion Manufacturer Lithium Ion Batteries 199

Green Car Congress

FEBRUARY 23, 2021

The ATLIS battery will utilize custom coatings to strike a balance between energy and power. These coatings, coupled with a special mechanical construction, will lead to optimized energy capacity and reduced charging time. —Professor Rao.

Universal 385

Universal Batteries Battery Motor 385

Green Car Congress

APRIL 19, 2022

Gold nanoparticles (AuNPs) possess tunable size- and shape-dependent properties that are ideal for catalytic properties for many applications. This study points the way for one-pot green synthesis of other engineered electrocatalysts for different applications. Without this curcumin coating, the performance is poor.We

Polymer 195

Polymer Fuel India Green 195

Green Car Congress

APRIL 11, 2021

The fourth GCxN cohort includes: Air Company (Brooklyn) – Transforming carbon dioxide captured from the air into impurity-free alcohols for spirits, fragrances, sanitizers and a variety of consumer industries, as well as for carbon-negative fuel in the long-term.

Hydrogen 418

Hydrogen Green Polymer Power 418

Green Car Congress

JUNE 13, 2022

Nouryon has introduced HP92 microspheres, a new innovation in thermoplastic microsphere fillers in high-pressure manufacturing processes for the automotive industry. Underbody coating and seam sealant are essential in reducing noise and protecting the vehicle underbody against environmental influences.

Polymer 186

Polymer Wisconsin Sweden Germany 186

Green Car Congress

AUGUST 29, 2023

a provider of precision nano-coating technology, and 6K Energy, a developer of critical materials for lithium-ion batteries, signed an agreement to implement commercial-scale production of 6K Energy’s US-made battery materials with Forge Nano’s proprietary Atomic Armor surface technology platform (commercial-scale Atomic Layer Deposition (ALD)).

Commercial 150

Commercial Li-ion Energy Production 150

Green Car Congress

MARCH 29, 2023

For instance, we had some early issues with the hydrogen particles causing magnets to fail, so we had to coat the magnets more effectively to prevent that. Coatings protect magnets from hydrogen incursion and embrittlement, while improved valve designs minimize leaks.

Hydrogen 259

Hydrogen Motor Motors Motoring 259

Green Car Congress

DECEMBER 20, 2022

It has numerous industrial, commercial and consumer applications, including as a solvent in the production of electrodes for Li-ion batteries. 1-BP (1-Bromopropane) is used as a solvent in commercial and industrial applications and as a reactant in the manufacturing of other chemical substances. Earlier post.).

EPA 321

EPA 2020 Li-ion Commercial 321

Green Car Congress

FEBRUARY 13, 2023

Its first customer, a well-known, globally operating supplier to the automotive industry, has ordered two different DC-link capacitors for applications in the 900V range, which are produced with the innovative NanoLam technology. Rheinmetall PolyCharge GmbH , a joint venture of Rheinmetall AG and PolyCharge America, Inc.,

DC 170

DC Polymer Wind Convert 170

Green Car Congress

APRIL 2, 2021

Moreover, they plan to transfer the action plan and the individual technologies for the production of fuel cells from research to industrial application. Hydrogen is set to be used in industry and in the future also in road traffic, finally heralding a shift away from gasoline and diesel fuel. © Fraunhofer IPT.

Fuel 496

Fuel Production Hydrogen Europe 496

Green Car Congress

OCTOBER 15, 2020

—Michael Lizak, ArcelorMittal global technology coordinator for Ford at Automotive Product Applications R&D. Ford conducts many tests before granting the product application ready status (AR). In terms of safety, we selected a higher strength material which gives Ford a huge safety advantage. —Jayanth Chintamani.

Ford 418

Ford Alabama Chicago Grant 418

Green Car Congress

NOVEMBER 5, 2019

Nouryon and US-based startup Forge Nano have agreed to explore a joint collaboration in ultra-thin coatings for high-growth applications including batteries and catalysts. The technology—atomic layer deposition (ALD)—also has the potential to open up entirely new applications.

Batteries 150

Batteries Battery Commercial Affordable 150

Green Car Congress

MAY 4, 2021

Using nature as a role model, the aviation industry has been intensively researching ways to reduce aerodynamic drag for many years. The aviation industry is facing similar challenges to the chemical industry: ongoing progress must be made with climate protection despite high energy requirements.

Climate Protection 482

Climate Protection Emissions Fleet Industrial 482

Green Car Congress

DECEMBER 1, 2021

Unlike traditional coatings, actnano’s gel-state ANG coatings can be applied to connectors and antennas, as well as underneath large components and processors, eliminating the need for masking. —Kasper Sage, managing partner at BMW i Ventures.

BMW 186

BMW Companies North America Financing 186

Green Car Congress

JUNE 9, 2022

The joint venture is expected to be established by the end of 2022, subject to customary conditions precedent such as applicable merger control clearances. Start of production of the JV is planned for early 2024.

Fuel 259

Fuel Hydrogen France Global 259

Green Car Congress

JANUARY 23, 2019

Forge Nano, formerly PneumatiCoat Technologies, is investigating processes for scaling atomic layer deposition (ALD) to create new core-shell materials, especially for battery applications, ( earlier post ) that could further improve the performance of battery materials. Source: Forge Nano.

Batteries 314

Batteries Battery Li-ion Low Cost 314

Green Car Congress

JANUARY 5, 2021

ArcelorMittal Dofasco announced a coating addition of its Nº 5 Hot-Dipped Galvanizing Line in Hamilton (Ontaria, Canada) to Aluminum Silicon (Alusi) for the production of ArcelorMittal’s patented Usibor Press Hardenable Steel for automotive structural and safety components. It features heat resistance up to 800 ?C The company ships 4.5

North America 170

North America Mexico America Exhaust 170

Green Car Congress

SEPTEMBER 15, 2017

By using HELLER machinery that incorporates NMRP, carmakers can mass-produce engines with highly energy-efficient cylinder bores with iron spray coating at a consistent quality level. mm-thick iron spray coating—or molten, low-carbon steel, sprayed onto the inner surface—primarily in high-performance and ultralow-emission cars.

Nissan 287

Nissan Engine Infinity Production 287

Green Car Congress

MARCH 7, 2023

The new technology center will focus on technical collaboration with customers in order to accelerate application innovation for Cabot’s battery materials product lines within Europe. The EMEA Technology Center is expected to commence operations by April 2023, with a planned expansion to be completed in 2024.

Corporation 210

Corporation Europe Batteries Battery 210

Green Car Congress

NOVEMBER 25, 2020

The companies are joining efforts to implement the carbon-negative UBQ thermoplastic ( earlier post ) into auto parts manufactured by Motherson Group for the automotive industry. UBQ Industrial Grade. As a bio-based composite thermoplastic material, UBQ Industrial Grade can replace plastic polymers in hundreds of applications.

Parts 362

Parts Carbon Auto Polymer 362

Green Car Congress

AUGUST 5, 2019

With a new coating process, researchers of Karlsruhe Institute of Technology (KIT) have produced electrodes for lithium-ion batteries at record speed. To produce these sections, the coating process has to be interrupted and restarted repeatedly. With the new technology, we reach up to 150 meters per minute in electrode coating.

Kits 321

Kits Li-ion Lithium Ion Batteries 321

Green Car Congress

MARCH 30, 2022

Berlin-based Theion , a developer of lithium-sulfur cathode technology, appointed Dr. Ulrich Ehmes as CEO and announced the upcoming commercial availability of its Crystal Battery for applications, beginning with the aerospace sector. The battery technology is compatible with a bipolar cell arrangement to maximize energy and power content.

Batteries 334

Batteries Battery Lithium Sulfur Lithium Ion 334

Green Car Congress

JULY 26, 2020

This technology is applicable to both the industrial and medical sectors, such as for energy-efficient steelmaking and on-demand oxygen for ventilators. manufacturing industry. manufacturing industry. This grant may lead to a first-ever cost-effective application of CO 2 direct air capture technology.

Manufacturer 186

Manufacturer Low Cost Idaho Solar 186

Green Car Congress

MAY 2, 2023

In this portfolio, Cabot has launched three ENTERA aerogel products that formulators can incorporate into a range of thermal barrier forms including blankets, pads, sheets, films, foams and coatings. Additionally, Cabot offers fumed alumina for separator and cathode active material coatings.

Li-ion 186

Li-ion Corporation Lithium Ion Batteries 186

Green Car Congress

JULY 1, 2020

Investments are being made in new state-of-the-art facilities covering every process stage of fuel cell production: from membrane coating and stack manufacturing to the production of fuel cell units. Current fuel cell coating line. We are pursuing the vision of the CO 2 -neutral transportation of the future.

Fuel 435

Fuel Production Volvo Commercial 435

Green Car Congress

AUGUST 16, 2022

announced the renewal of the Industrial Mining Licence for the Malsiripura, M1 mining project in Sri Lanka (known as Ceylon until 1972) from the Geological Survey and Mines Bureau (GSMB). Vancouver-based Ceylon Graphite Corp. The Licence grants exclusive rights to mine graphite from within the M1 mining area.

Sri Lanka 417

Sri Lanka Grant Industrial Industry 417

Green Car Congress

AUGUST 29, 2022

Asahi Kasei, Polypore’s parent company, may further support the LFP supply chain through its widely diversified manufacturing base and ABF will evaluate component supply opportunities for items such as plastic battery packs and thermal retardant materials that could further benefit the LFP supply chain and industry.

Batteries 199

Batteries Battery Lithium Ion Energy Storage 199

Green Car Congress

MAY 1, 2023

Water (H 2 O) microdroplets are sprayed onto a magnetic iron oxide (Fe 3 O 4 ) and Nafion-coated graphite mesh using compressed N 2 or air as the nebulizing gas. nmol s −1 cm −2 at room temperature without application of an external electric potential and without irradiation. The conversion rate reaches 32.9 ± 1.38 Song et al.

Water 459

Water F-150 Low Cost Gas-Electric 459

Green Car Congress

AUGUST 27, 2022

Anaphite focuses on the enhancement of lithium-ion batteries for the electric vehicle industry. Anaphite incorporates graphene into battery materials, via an inexpensive and scalable process that fits directly into existing cell production lines.

Batteries 284

Batteries Battery Li-ion Companies 284

Green Car Congress

MARCH 9, 2023

Furthermore, perfluorocarbon moieties in PFAS are both hydrophobic and oleophobic, making many PFAS effective surfactants or surface coatings. Fluoropolymers are one specific class of PFAS, and play a significant role in the automotive industry.

International 210

International Washington Standards DC 210

Green Car Congress

JUNE 9, 2020

Driven by demand from the automotive and energy storage markets, NCM/NCA type cathode materials are expected to remain dominant though other cathode types will take market share in niche environments or applications. In 2019, Li-ion battery capacity reached 180GWh, as the market shifted to increase demand from the automotive industry.

Li-ion 246

Li-ion Ni-Li Batteries Battery 246

Green Car Congress

DECEMBER 24, 2021

The product mix includes jumbo, large and medium flake for industrial applications and fines. The precursor material is then coated and heat treated to produce a finished AAM. Syrah will transport the natural graphite concentrate (-100 mesh fines material) from Balama Graphite Operation to Vidalia.

Mozambique 221

Mozambique Louisiana Tesla Australia 221

Green Car Congress

JULY 13, 2023

JM and the Shanghai Jiading District plan to build a new catalyst-coated membrane (CCM) production facility, providing CCM production capability for multiple proton exchange membrane (PEM) fuel cell applications and PEM electrolyzers. A platinum catalyst puts the protons and electrons back together to form hydrogen.

China 195

China Building Fuel Hydrogen 195