Green Car Congress

AUGUST 4, 2021

Now, however, Dürr is significantly expanding the scope of its AI applications with the enablement of analysis software from the DXQ product family for sealing. Previously, earlier models, robots from other manufacturers and technology outside of paint application could not be connected.

Market 221

Market Maintenance Connect Connected 221

Green Car Congress

JULY 18, 2023

AMADA WELD TECH, a manufacturer of equipment and systems for welding, marking, cutting, sealing, and bonding, announced a range of galvo scan heads for precision laser welding applications. >Galvo This improves the manufacturability of parts with lower tolerances on fit-up between the parts.

Range 150

Range Manufacturer Parts Environment 150

Green Car Congress

AUGUST 23, 2023

Freudenberg Sealing Technologies has developed thermal barriers that help to slow down thermal runaway in Li-ion batteries by increasing resistance to propagation. Profile seals, module separators and covers, including those for bus bars, cooling lines or electrical components are a few of the products currently being produced.

Batteries 195

Batteries Battery Li-ion Lithium Ion 195

Green Car Congress

SEPTEMBER 9, 2020

Freudenberg Sealing Technologies has launched the development of a special fuel cell system for heavy-duty trucks. In the past year, Freudenberg Sealing Technologies has launched successful development projects for buses and cruise ships with partners such as FlixBus and Meyer Werft in Germany.

Fuel 348

Fuel Lithium Ion Commercial Gas-Electric 348

Green Car Congress

MAY 19, 2022

The soybean oil in the tire is a bio-based material currently sourced from surplus left over from food applications and is another step in Goodyear’s global journey to fully replace petroleum-derived oils by 2040. The Endurance WHA is now made with soybean oil, which replaces a portion of the petroleum-based materials used in its production.

Oil 273

Oil Waste North America Fleet 273

Green Car Congress

SEPTEMBER 24, 2021

The smaller footprint of the stacked valves allows for a tighter seal when welded to the tank, in turn reducing permeation. These features include a seal that reduces liquid leak in static venting conditions, as well as the ability to change the shut-off height of the FLVV through component substitution.

Eaton 195

Eaton Emissions Fuel Manufacturer 195

Green Car Congress

SEPTEMBER 14, 2020

Aeva , a company building next-generation sensing for autonomous vehicles ( earlier post ), and ZF are partnering to bring the first Frequency Modulated Continuous Wave (FMCW) LiDAR to market for autonomous driving applications. Earlier post.). We have seen that different markets require different solutions.

Production 473

Production Range Porsche Industrial 473

Green Car Congress

NOVEMBER 27, 2019

XALT Energy, a company of Freudenberg Sealing Technologies, is a Midland, Michigan-based global developer and manufacturer of lithium-ion technology solutions. XALT offers NMC/G chemistries to cover a wide range of applications. —Claus Moehlenkamp, CEO of Freudenberg Sealing Technologies. Fuel cells.

All-Electric 360

All-Electric Battery Powered Lithium Ion Energy 360

Green Car Congress

AUGUST 5, 2022

The marine fuel cell system uses a double envelope enclosure that enables the system to be perfectly sealed in a saline environment. Specially designed for high power applications, it covers a wide range of power from 100 kW up to several megawatts, and it can address stationary as well as heavy mobility markets.

Mariner 284

Mariner Fuel Hydrogen Maintenance 284

Green Car Congress

MARCH 9, 2023

Applications include fuel lines, fuel hoses, turbocharger hoses and hoses in hydraulic systems; ABS brake lines; O-rings; shaft seals and valve stem seals; air intake manifold and cylinder head gaskets; and fuel cells and batteries.)

International 210

International Washington Standards DC 210

Green Car Congress

JUNE 23, 2023

Featuring integrated electronics, the flap systems ordered here will be used as bypass and high-sealing shut-off valves for fuel cells. Due to their special design, the components meet the most stringent sealing specifications for fuel cell modules with a power output of 100-150 kW.

Fuel 150

Fuel North America Hydrogen Mariner 150

Green Car Congress

SEPTEMBER 3, 2023

Rheinmetall AG won a new order worth a figure in the lower two-digit million-euro range for cathode flaps and shut-off valves from one of Europe’s largest and most influential specialists for fuel cell applications in the heavy transport sector. The cathode flaps can be utilized universally.

Fuel 221

Fuel Hydrogen Exhaust Installation 221

Green Car Congress

MARCH 27, 2023

The team succeeded in establishing synthesis conditions by optimizing the arrangement of sulfur and silicon powders and creating a perfectly sealed environment to withstand the vapor pressure of sulfur at 800 degrees of reaction temperature. (b) Schematic of the solid–gas phase reaction for synthesizing SiS 2. —Nam et al.

Li-ion 243

Li-ion Production Batteries Battery 243

Green Car Congress

MAY 17, 2018

Freudenberg Sealing Technologies, one of the world’s leading specialists in sealing technologies for the auto industry, has strengthened its position in the energy and electric mobility sectors with an acquisition and a strategic investment. In addition, these products will also be developed further for mobile applications.

Fuel 170

Fuel Batteries Battery Lithium Ion 170

Green Car Congress

JULY 14, 2023

These new products are 30% glass fiber-reinforced, intumescent [(of a coating or sealant) swelling up when heated or sealing a gap in case of fire], flame-retardant (FR) materials, based on polypropylene (PP), and can be used for electric vehicle (EV) battery pack components such as top covers, enclosures and module separators.

Saudi Arabia 195

Saudi Arabia Batteries Battery Polymer 195

Green Car Congress

JUNE 29, 2016

One trend in automotive manufacturing is toward fully automatic sealing of welds; robots are increasingly performing this task in automobile production. Dürr has now sold its 2,000 th sealing robot. The EcoRS 30L16S milestone machine will perform rough seam sealing at Škoda in Kvasiny, Czech Republic, and it will also be a first.

Czech Republic 150

Czech Republic Conversion Water Convert 150

Green Car Congress

NOVEMBER 13, 2019

The design is a major achievement for emissions reduction as it enables a leak-proof seal for gasoline vapors. Overmolding and laser welding eliminate separate seals and fasteners, creating a leak-proof seal. The use of BASF’s Ultramid polyamide 6 and 66 grades were crucial to enabling a leak-proof seal for gasoline vapors.

GM 220

GM South Carolina Cadillac Fuel 220

Green Car Congress

DECEMBER 29, 2020

Key initiatives within the Advanced Storage R&D area include improvements to monitor the seal integrity of caprocks and to predict seismicity magnitudes and potential hazards before and during the injection of CO 2. brines) in the subsurface within and/or above the storage complex seal.

Carbon 199

Carbon Commercial Available Energy 199

Green Car Congress

SEPTEMBER 9, 2022

Purely battery-electric solutions are often out of the question for these deep-sea applications due to their high weight and space requirements. Route flexibility and ranges of more than 5,000 nautical miles are basic requirements of the world’s maritime fleet. This corresponds to a total service life of 1.2 million km for a truck.

Power 259

Power Powered Fuel Hydrogen 259

Green Car Congress

FEBRUARY 2, 2023

Next-generation fuel cell system This significant cost reduction was achieved by various measures including the adoption of innovative materials for electrodes, advancement of a cell sealing structure, simplification of the supporting equipment (“balance of plant”) and the improvement of productivity. in California.

Honda 428

Honda Hydrogen Fuel North America 428

Green Car Congress

SEPTEMBER 13, 2019

The low-temperature fuel cell stack NM12 features metallic bipolar sheets with an extremely high power density and an electrical output of up to 135 kW el for applications in the automobile and commercial vehicle sector. The stack runs in hydrogen-air mode and is liquid-cooled. NM12 fuel cell stack.

Fuel 255

Fuel Hydrogen Polymer 2018 255

Green Car Congress

APRIL 2, 2019

Dana Incorporated is applying its fuel cell expertise to designing and manufacturing composite and metallic bipolar plates for public transportation systems, such as eBus and hydrail applications. Dana’s fuel-cell technologies and capabilities will be on display at Hannover Messe 2019, April 1-5 in Hannover, Germany.

Transportation 236

Transportation Fuel Hydrogen Germany 236

Green Car Congress

SEPTEMBER 26, 2022

Closed-loop geothermal systems circulate a working fluid through a sealed downhole heat exchanger to absorb and transport heat. Both companies may also assess potential collaboration for advanced geothermal technology opportunities using ACL globally.

Chevron 199

Chevron Japan Oil Affordable 199

Green Car Congress

OCTOBER 16, 2020

As some of the components are exposed to a variety of media through the cooling water, air and hydrogen channels, the PPA compound based on PA9T combines excellent chemical resistance with meeting the purity requirements for sensitive applications in fuel cells and electronic parts.

Fuel 243

Fuel Engine Hydrogen Water 243

Green Car Congress

MARCH 17, 2021

Freudenberg Sealing Technologies (FST) has expanded its material testing capabilities to include performance and compatibility evaluations of the rubber, elastomers and thermoplastics used to seal and safely maintain lithium-ion batteries. The company has installed equipment and adopted new testing protocols in its Plymouth, Mich.,

Lithium Ion 259

Lithium Ion Batteries Battery Environment 259

Green Car Congress

FEBRUARY 4, 2019

Freudenberg Sealing Technologies has become majority stakeholder of XALT Energy, a Midland, Mich.-based based global developer and manufacturer of lithium-ion technology solutions targeted for heavy-duty mobility applications. —Claus Moehlenkamp, CEO of Freudenberg Sealing Technologies. Earlier post.) Earlier post.)

Li-ion 207

Li-ion Lithium Ion Energy Batteries 207

Green Car Congress

SEPTEMBER 18, 2019

Consistent high heat performance is critical in under-the-hood applications to accommodate for various load, torque and speed conditions in engines. Ascend’s new HTPA grades offer higher strength, stiffness, chemical- and temperature-resistance for metal replacement and high-heat automotive applications.

Houston 199

Houston Polymer Exhaust United States 199

Green Car Congress

JUNE 23, 2023

This suitability testing relates both to the compatibility of the fuels in varying blends with each other and their impact on the materials of fuel-carrying components, such as high-pressure pumps, fuel filters, seals and injectors.

Diesel 367

Diesel Alternative Fuels Fuel Gas 367

Green Car Congress

MAY 11, 2021

It also enables the company to strip-back fuel cell complexity and reduce weight, negating the need for separate sealing materials and lowering the number of components without negatively impacting build quality or performance.

Fuel 243

Fuel Energy Vehicles Hydrogen 243

Green Car Congress

AUGUST 12, 2020

The MGM is a permanent magnet synchronous motor (PMSM) with the special feature of a hermetically sealed system in which the stator inner diameter is oversized in relation to the rotor or the permanent magnet outer diameter. G+L innotec is now expanding to include hydrogen applications, thus spanning the arc to electric mobility.

Motor 259

Motor Motors Motoring Fuel 259

Green Car Congress

SEPTEMBER 10, 2021

For the order just issued—based on the automaker’s application—Rheinmetall is the sole source for these electric water pumps. This wet rotor pump design requires no dynamic sealings and remains free of wear and tear throughout the vehicle’s entire lifetime.

Hybrid 243

Hybrid Electric Electrical Water 243

Green Car Congress

DECEMBER 4, 2022

million grant to develop a universal disposal canister for advanced reactor applications; a $4-million grant with advanced reactor developer Oklo, Inc. million grant to develop a universal disposal canister for advanced reactor applications; a $4-million grant with advanced reactor developer Oklo, Inc.

EPRI 186

EPRI Waste Estonia Grant 186

Green Car Congress

APRIL 25, 2023

One of the recent developments in the project is the use of advanced gasket application equipment and an advanced visual metrology system to address an industrial challenge around fuel cell stack leakages. The visual metrology system stops leaks in the fuel cell by checking if the seals are applied correctly.

Toyota 259

Toyota Fuel Hydrogen Manufacturer 259

Green Car Congress

AUGUST 22, 2022

The team then found KEB America who produces advanced power electronics for elevators that could be adapted for this application. One megawatt is pretty useful; it can power 500-1,000 homes or replace diesel generators for remote applications. Our industry partners are targeting 1- to 5-megawatt systems.

Grid 396

Grid Power Powered CO2 396

Green Car Congress

FEBRUARY 4, 2023

Therefore, green hydrogen, which is produced from renewable energies and carbon-free by nature, offers great potential for cleaner transportation, especially in sectors difficult to electrify, such as heavy-duty commercial vehicles, on- and off-highway applications, and the industrial and marine sectors.

Hydrogen 221

Hydrogen Engine Oil Emissions 221

Green Car Congress

APRIL 19, 2022

The enabling technologies, called Safe Impact Resistant Electrolytes, or SAFIRE, are particularly suitable for application in the electric vehicles and aerospace industries. ORNL’s technology mixes an additive into the conventional electrolyte. One of the ORNL advances involves the production process for the batteries. —Gabriel Veith.

Batteries 150

Batteries Battery Lithium Ion Virginia 150

Green Car Congress

OCTOBER 19, 2022

This high-strength platform is fortified through the use of ultra-high-tensile steel as well as the application of structural adhesive technology for body rigidity and passenger security. The TNGA structure employs additional seals in its body panel gaps to insulate noise penetration and enhance air-sealing performance.

Hybrid 459

Hybrid Toyota Fuel Economy Economy 459