Green Car Congress

APRIL 4, 2023

In addition to recent investments in Fridley, Cummins is investing more than $1 billion across its US engine manufacturing network in Indiana, North Carolina and New York. The X15N is part of the new fuel-agnostic 15-liter engine platform produced at JEP. The Cummins Power Systems factory is a 1.1

North Carolina 304

North Carolina Manufacturer Engine Indiana 304

Green Car Congress

JUNE 28, 2020

The BMW Group has officially opened its new Additive Manufacturing Campus. The new center brings together production of prototype and series parts under one roof, along with research into new 3D printing technologies, and associate training for the global rollout of toolless production. —Milan Nedeljkovi?,

BMW 468

BMW Manufacturer Parts Industrial 468

Green Car Congress

APRIL 29, 2021

million for projects that support the recovery, recycling, and reuse of material waste generated by the manufacturing sector. The US industrial sector is responsible for 28% of domestic carbon emissions and consumes roughly one-third of the country’s primary energy—much of which is used to make materials.

Manufacturer 186

Manufacturer Carbon Emissions Waste 186

Green Car Congress

JUNE 15, 2023

IperionX Limited has agreed a Scope of Work (SoW) for the supply of titanium metal components for Ford Motor Company using IperionX’s 100% recycled, low-carbon titanium metal. This Ford SoW follows a detailed program of quality and strength testing of IperionX’s low-carbon, circular titanium metal.

Carbon 305

Carbon Ford Shelby Utah 305

Green Car Congress

JANUARY 23, 2023

As part the trials, Teijin and Fujitsu will leverage a blockchain-based commercial platform launched in July 2022 to promote the sustainable use of recycled materials, tracing and management of greenhouse gas (GHG) emissions within the environmentally-conscious bicycle industry. Earlier post.) Earlier post.)

Carbon Fiber 418

Carbon Fiber Carbon Asia Industrial 418

Green Car Congress

FEBRUARY 28, 2021

Vulcan Energy Resources will collaborate with DuPont Water Solutions,a leader in water filtration and purification, to test and to scale up Direct Lithium Extraction (DLE) solutions for Vulcan’s Zero Carbon Lithium extraction process. Earlier post.).

Carbon 435

Carbon Water Germany Renewable 435

Green Car Congress

MAY 28, 2021

If a ban were introduced on the sale of new gasoline and diesel cars, and they were replaced by electric cars, the result would be a significant reduction in lifecycle carbon dioxide emissions primarily due to reduced tailpipe CO 2 emissions, according to a new lifecycle study by researchers at Chalmers University of Technology, Sweden.

Emissions 259

Emissions Carbon Manufacturer Sale 259

Green Car Congress

OCTOBER 20, 2022

billion to 21 projects to expand domestic manufacturing of batteries for electric vehicles (EVs) and the electrical grid and for materials and components currently imported from other countries. This US-owned and operated manufacturing plant in northern Alabama will be the first of its size in North America. Earlier post.) Of that, $1.6

Parts 459

Parts Batteries Battery Lithium Ion 459

Green Car Congress

MARCH 5, 2020

Volvo Cars formally inaugurated a new battery assembly line at its Belgian manufacturing plant in Ghent, where it will start building its first fully electric car, the XC40 Recharge P8, later this year. The Ghent plant will provide important learnings to other manufacturing sites in terms of process optimisation and efficiency.

Volvo 530

Volvo Manufacturer Batteries Battery 530

Green Car Congress

JANUARY 27, 2021

has set the goal to achieve carbon neutrality across the company’s operations and the life cycle of its products by 2050. Life cycle” includes raw material extraction, manufacturing, use, and the recycling or reuse of end-of-life vehicles. Nissan Motor Co.,

Nissan 418

Nissan Carbon Market Climate Change 418

Green Car Congress

MAY 2, 2019

NextGenAM partners Premium AEROTEC, EOS and Daimler are building a pilot production line for a next-generation automated additive manufacturing (AM) process. Retainer of the truck diesel engine—the first spare part of the partner pilot project NextGenAM, from Daimler, Premium AEROTEC and EOS.

Parts 223

Parts Manufacturer Building Production 223

Green Car Congress

MARCH 25, 2019

The first prototype carbon fiber MonoCell, the tub that forms the main structure of McLaren’s cars, has been shipped from the company’s new £50-million (US$66-million) innovation and production center in Yorkshire to the McLaren Production center (MPC) in Woking, Surrey. First prototype carbon fibre chassis delivered from the MCTC.

Carbon Fiber 299

Carbon Fiber Carbon Bahrain Manufacturer 299

Green Car Congress

APRIL 27, 2023

SKF has signed a letter of intent with CAKE, the Swedish maker of premium, lightweight, electric motorcycles, to explore how it can incorporate bearings produced with the lowest possible carbon emissions. SKF experts will also work with CAKE to look at ways to further reduce emissions as part of the project.

Electric Motorcycles 273

Electric Motorcycles Motorcycles Carbon Emissions 273

Green Car Congress

MARCH 24, 2021

As part of a pilot project, Audi is procuring 20-inch wheels for the Audi e-tron GT electric car that are made from low-CO 2 emission aluminum supplied by Alcoa to RONAL GROUP, the wheel’s manufacturer. An inert anode is insoluble in the electrolyte under the conditions obtained in electrolysis. Source: Alcoa.

Audi 418

Audi Supplies Carbon Climate Protection 418

Green Car Congress

DECEMBER 11, 2021

Volvo Cars and Northvolt will open a joint research and development (R&D) center in Gothenburg as part of a SEK 30 billion (US$3.3 billion) investment in battery development and manufacturing. Volvo Cars is working with Northvolt to create an end-to-end system for batteries, whereby it develops and builds the batteries itself.

Volvo 170

Volvo Parts Manufacturer Batteries 170

Green Car Congress

JULY 27, 2021

The US Department of Energy (DOE) announced $60 million in funding for its largest-ever cohort of university-based Industrial Assessment Centers (IACs) , which assist small- and medium-sized manufacturers in reducing their carbon emissions and lowering energy costs, while training the next generation of energy-efficiency workers.

Manufacturer 259

Manufacturer Energy Universal Building 259

Green Car Congress

APRIL 28, 2023

Porsche AG and Norsk Hydro ASA will work together to further reduce the carbon footprint of Porsche’s car models by using low-carbon aluminum and extrusions from Hydro. Hydro will deliver to Porsche and several of Porsche’s component suppliers its low-carbon aluminum offering, Hydro Reduxa 4.0

Porsche 284

Porsche Carbon Batteries Battery 284

Green Car Congress

MAY 4, 2023

The companies have initiated the partnership with a non-recurring engineering (NRE) agreement to develop low-carbon technology for the conversion of critical metals—first virgin and later recycled material—into battery-grade cathode active material (CAM) precursors, which are essential to 6K Energy’s advanced cathode manufacturing.

Li-ion 199

Li-ion Carbon Energy Batteries 199

Green Car Congress

JULY 17, 2020

EIT InnoEnergy, the European innovation engine for sustainable energy, announced a partnership with Vulcan Energy Resources Limited (Vulcan), a start-up lithium exploration company, to produce the world’s first completely carbon-neutral lithium in Germany. As a result, the carbon footprint of the production process could even be negative.

Germany 491

Germany Carbon Lithium Ion Europe 491

Green Car Congress

JANUARY 24, 2023

Elkem, a company developing silicones, silicon products and carbon solutions, officially inaugurated the world’s first carbon capture pilot for smelters. The Mobile Test Unit (MTU), delivered by Aker Carbon Capture, is now connected to Elkem’s plant in Rana, Norway, which produces high-purity ferrosilicon and microsilica.

Carbon 284

Carbon Norway Industrial Industry 284

Green Car Congress

DECEMBER 9, 2022

At an event held at its steel plant in Ghent, Belgium, ArcelorMittal inaugurated its flagship carbon capture and utilization (CCU) project. It will reduce annual carbon emissions from the Ghent plant by 125,000 tonnes. This project will reduce annual carbon emissions in Ghent by 112,500 tonnes. Earlier post.)

Carbon 273

Carbon Belgium Waste Coal 273

Green Car Congress

DECEMBER 10, 2021

Monolith , a leader in clean carbon black production, signed a collaboration agreement and letter of intent (LOI) with The Goodyear Tire & Rubber Company, one of the world's largest tire companies. Monolith’s carbon black enables manufacturers such as Goodyear to meet sustainability goals and demand for clean materials.

Carbon 221

Carbon Nebraska Production Clean 221

Green Car Congress

AUGUST 2, 2021

million funding opportunity ( DOE-FOA-0002553 ) to support manufacturing innovations for high performance clean energy technologies to drive economy-wide reductions in carbon emissions, including: Topic area 1: Manufacturing Process Innovation. Topic Area 1c: Sustainable Chemistry Practices in Manufacturing.

Manufacturer 186

Manufacturer Li-ion Lithium Ion Batteries 186

Green Car Congress

JANUARY 19, 2021

Greenergy will invest in Front End Engineering Design (FEED) of a project to produce low-carbon transportation fuels from waste tires. In the first phase, the planned facility will process up to 300 tons of shredded tires each day to produce low-carbon, low-sulfur drop-in fuels that can be blended into diesel and gasoline.

Waste 397

Waste Carbon Fuel Renewable 397

Green Car Congress

FEBRUARY 1, 2023

Cabot Corporation plans to add conductive carbon additives (CCA) capacity in the United States to enhance its position in the market and support the transition to electric vehicles (EVs). As part of these efforts, federal and state governments have implemented a variety of programs in the form of grants, loans, and tax incentives.

Li-ion 243

Li-ion Carbon Batteries Battery 243

Green Car Congress

APRIL 6, 2023

Ramaco Carbon is partnering with Oak Ridge National Laboratory to develop new, large-scale processes for making graphite from coal. The conversion of coal to higher value materials, such as graphene, graphite or carbon nanotubes, is of high interest, and a number of researchers have proposed processes.

Coal 210

Coal West Virginia Carbon Wyoming 210

Green Car Congress

DECEMBER 22, 2022

Based on this clear decision made as part of its Vorsprung 2030 corporate strategy, Audi is now taking steps to prepare its global facilities for the production of all-electric cars. Audi will make its manufacturing processes even more flexible. Audi is building on its existing global production network to achieve this vision.

All-Electric 307

All-Electric Audi Manufacturer Electric Vehicles 307

Green Car Congress

FEBRUARY 18, 2020

As part of a larger £90 million (US$117 million) package of awards to cut carbon emissions in industry and homes, the UK is awarding £28 million (US$36.5 million) to five demonstration phase projects for low-carbon hydrogen production. HyNet – low carbon hydrogen plant. Contract value: £3.12 million (US$4.1 million (US$9.7

Hydrogen 386

Hydrogen Carbon Production Wind 386

Green Car Congress

JULY 10, 2022

The UK government is awarding £54 million to 15 projects to develop technologies that remove carbon emissions from the atmosphere. The carbon dioxide can then be permanently stored or used in various products or applications. The biochar is rich in carbon and can be used as a fertilizer. Cambridge Carbon Capture Ltd.,

Carbon 305

Carbon Coal Gas-Electric Waste 305

Green Car Congress

MARCH 7, 2021

Haldor Topsoe will invest in a manufacturing facility producing highly efficient solid oxide electrolyzers (SOEC) with a total capacity of 500 megawatt per year with the option to expand to 5 gigawatt per year. It basically consists of three parts: an anode, a cathode and an electrolyte.

Hydrogen 476

Hydrogen Green Manufacturer Saudi Arabia 476

Green Car Congress

MARCH 27, 2023

BHP has signed an agreement for piloting of carbon capture and utilization technology with China’s HBIS Group Co., As part of this new project, HBIS and BHP will trial pilot-scale demonstrations of carbon capture and utilization technologies at HBIS’ steel operations in China.

Carbon 199

Carbon China Mitsubishi Conversion 199

Green Car Congress

SEPTEMBER 21, 2022

ClearFlame Engine Technologies, a company developing net-zero engine technology ( earlier post ), has hit a number of key milestones through multiple partnerships with customers, manufacturers, and fuel providers. These included Central Indiana Ethanol (as manufacturer), CountryMark (as distributor), and Co-Alliance Cooperative Inc. (as

Engine 273

Engine Manufacturer Fuel Indiana 273

Green Car Congress

NOVEMBER 11, 2022

6K Additive, a division of 6K, a leader in the sustainable production of engineered materials for additive manufacturing and lithium-ion batteries, and Fraunhofer Institute for Laser Technology ILT are collaborating to create a complete life cycle assessment (LCA) for additive manufacturing.

Manufacturer 150

Manufacturer Fusion Lithium Ion Carbon 150

Green Car Congress

APRIL 24, 2020

The BMW Group has selected SGL Carbon to produce a cover component for battery enclosures. Carbon fibers are ideal for especially stressed structures or load-bearing elements, such as the underbody panels and side frames. For components subjected to less stress, such as battery box covers, glass fibers or a fiber mix may suffice.

Carbon Fiber 186

Carbon Fiber Carbon BMW Batteries 186

Green Car Congress

JULY 22, 2020

Borealis, a supplier of polyolefin plastic materials for engineering applications in the automotive industry, announced the availability of Fibremod, its innovative carbon and glass fiber-reinforced polypropylene (PP) technology, for the North American automotive market. Fibremod PP carbon fiber (CF).

Carbon Fiber 221

Carbon Fiber Carbon Available Market 221

Green Car Congress

JUNE 21, 2021

As part of the joint work, the parties plan to evaluate the technical and commercial aspects of a potential project for the production of environmentally friendly hydrogen for Metalloinvest factories located in Belgorod and Kursk regions. —Evgeny Pakermanov, President of Rusatom Overseas JSC. Earlier post.).

Hydrogen 243

Hydrogen Carbon Production Russia 243

Green Car Congress

MAY 14, 2012

Johnson Controls is applying its expertise in natural fiber processing technology for interior components to vehicle exteriors; the company is using liquid resin press molding to enable series production of carbon fiber body parts. Structure of the carbon body parts. Click to enlarge.

Carbon 255

Carbon Parts Carbon Fiber Production 255