Green Car Congress

JANUARY 21, 2021

Critical materials are used in many products important to the US economy and energy technologies, such as rare-earth elements used to manufacture high-strength magnets for offshore wind-turbine generators and lithium and cobalt in lithium-ion batteries for electric vehicles. 525 Solutions, Inc.;

Li-ion 321

Li-ion Wyoming Lithium Ion Corporation 321

Green Car Congress

JULY 15, 2015

The projects conducted through this program are geared toward reducing the cost of coal conversion and mitigating the environmental impacts of fossil-fueled power generation. Montana State University. DOE: $650,000 Non DOE: $162,500 Total: $812,500 (20% cost share). The Pennsylvania State University. Lead organization.

Coal 150

Coal Conversion Cost Of Montana 150

Green Car Congress

AUGUST 21, 2015

A team led by Dr. Stuart Licht at The George Washington University in Washington, DC has developed a low-cost, high-yield and scalable process for the electrolytic conversion of atmospheric CO 2 dissolved in molten carbonates into carbon nanofibers (CNFs.) Now, the team, which includes postdoctoral fellow Jiawen Ren, Ph.D.,

Low Cost 150

Low Cost Carbon Li-ion Carbon Fiber 150

Green Car Congress

SEPTEMBER 5, 2019

The Faraday Institution will award up to £55 million (US$67 million) to five UK-based consortia to conduct application-inspired research to make step changes in battery chemistries, systems and manufacturing methods. The five new projects are: Next generation electrode manufacturing–Nextrode.

Energy Storage 223

Energy Storage Li-ion Lithium Ion Energy 223

Green Car Congress

JULY 20, 2020

Solid-oxide-fuel-cell manufacturer Bloom Energy is entering the commercial hydrogen market by introducing hydrogen-powered fuel cells and electrolyzers that produce renewable hydrogen. Over time, it has improved the efficiency and aggressively reduced the cost of its products and expects this trend to continue.

Hydrogen 386

Hydrogen South Korea Market Energy 386

Green Car Congress

FEBRUARY 18, 2020

A consortium of Progressive Energy, Essar, Johnson Matthey, and SNC-Lavalin will deliver the project comprising the development of a 100,000 Nm 3 per hour clean hydrogen production facility for deployment as part of the HyNet Cluster, using Johnson Matthey’s low-carbon hydrogen technology which enables carbon capture and storage. million).

Hydrogen 386

Hydrogen Carbon Production Wind 386

Green Car Congress

JUNE 2, 2023

Projects from this solicitation, which will be implemented over the next 1–3 years, will focus on lowering the cost of heliostats and heliostat technologies and creating new market opportunities for the heliostat industry. Low-cost heliostats offer significant renewable energy potential.

Solar 170

Solar Energy Storage Low Cost Concept 170

Green Car Congress

AUGUST 2, 2022

However, without strengthened domestic manufacturing capacity, the US will continue to rely on clean energy imports, exposing the nation to supply chain vulnerabilities while simultaneously losing out on job opportunities. The consortium will be led by the University of Toledo, First Solar, Colorado State University, Toledo Solar Inc.,

Solar 186

Solar Colorado Supplies Commercial 186

Green Car Congress

JANUARY 4, 2021

Current Direct , a new €12-million research and innovation project funded by the European Commission’s Horizon 2020 program, is proposing an innovative lithium-ion cell optimized for waterborne transport, using novel manufacturing techniques allowing for a consistent cost reduction compared to the current market prices.

Mariner 305

Mariner Batteries Battery Lithium Ion 305

Green Car Congress

DECEMBER 22, 2019

LeMond Carbon announced the results of an independent technical audit conducted by Bureau Veritas (BV) of its carbon fiber manufacturing process. The audit was conducted on a pilot line at Deakin University’s Carbon Nexus facility in Geelong, Australia. From Bureau Veritas audit of LeMond’s carbon fiber manufacturing process.

Carbon Fiber 221

Carbon Fiber Carbon Tennessee Universal 221

Green Car Congress

JUNE 9, 2017

million for 30 new projects aimed at discovery and development of novel, low-cost materials necessary for hydrogen production and storage and for fuel cells onboard light-duty vehicles. Precursor Development for Low-Cost, High-Strength Carbon Fiber. Carnegie Mellon University. University of Connecticut.

Hydrogen 170

Hydrogen Carbon Fiber Fuel Low Cost 170

Green Car Congress

JULY 12, 2021

Enedym, a switched reluctance motor (SRM) spinout from McMaster University, closed a $15-million financing round from an international group of strategic investors within the US, Canada, Europe, and India, including P&A Paletta Giving Inc., —Karen Mossman, McMaster University’s vice-president, research. TRIO Capital Group Inc.,

Motor 321

Motor Motors Motoring Wind 321

Green Car Congress

APRIL 30, 2022

In 2021, Next Generation Manufacturing Canada (NGen) launched a call for proposals to support R&D projects for zero-emission vehicle (ZEV) manufacturing, systems, components, and batteries in Canada. The selected projects are: Advanced Manufacturing Process Innovations – Flex-Ion Battery Innovation Center. Lead: Ventra Group Co.;

Canada 304

Canada Li-ion Emissions Vehicles 304

Green Car Congress

AUGUST 7, 2020

REPAIR teams will develop technology that enables gas utilities to update their distribution systems at low cost and continue to reliably service commercial and residential gas delivery needs nationwide. University of Colorado, Boulder. University of Maryland. Carnegie Mellon University.

Gas 297

Gas Gas-Electric Universal Colorado 297

Green Car Congress

OCTOBER 5, 2010

The average cost to trial participants for recharging at home is between 25p and £1 (US$0.40 The data analyzed by Aston University combines and compares the behavior patterns of 25 Mitsubishi i-MiEV drivers over two consecutive quarters. The low cost of ‘refuelling’ in relatively short periods of time reinforce this.

Low Cost 186

Low Cost Recharge i-MiEV Mitsubishi 186

Green Car Congress

JUNE 4, 2023

Realta, spun out of a $10-million ARPA-e funded project at the University of Wisconsin-Madison, is targeting industrial heat and power as an early application for its fusion technology in which the ability to operate at a wide range of scales is a significant advantage. Realta Fusion Inc. Madison, WI). Xcimer Energy Inc. Redwood City, CA).

Fusion 305

Fusion Commercial Energy Companies 305

Green Car Congress

AUGUST 18, 2016

The Institute for Advanced Composites Manufacturing Innovation, IACMI , in partnership with DuPont Performance Materials, Fibrtec Inc. and Purdue University, has launched the first project selected with a dual focus on decreasing the cost of manufacture and increasing design flexibility for automotive composites.

Carbon Fiber 150

Carbon Fiber Carbon Tennessee Universal 150

Green Car Congress

FEBRUARY 19, 2010

Companies such as Novozymes have worked for years to reduce the cost and improve the efficiency of their enzymes for this type of application. Now, researchers at the University of Central Florida have developed a tobacco plant-derived cocktail of enzymes for the efficient hydrolysis of a range of lignocellulosic biomass.

Low Cost 218

Low Cost Production Florida Universal 218

Green Car Congress

AUGUST 30, 2019

A team of researchers at George Washington University led by Prof. The C2CNT production is achieved at a fraction of the current cost of manufacturing nanotubes and results in a cost of carbon savings in the materials production significantly below the current cost of carbon mitigation.

Carbon 249

Carbon Emissions Washington CO2 249

Cars That Think

MARCH 15, 2024

Ayman El-Refaie, Marquette University Now a sleeper option, synchronous reluctance motors , is getting a surge of interest, thanks to materials-science breakthroughs at GE Aerospace. No one outside of GE Aerospace knows whether, or when, the company might license or manufacture its material. (GE

Motor 124

Motor Motors Motoring Universal 124

Green Car Congress

AUGUST 22, 2013

ARPA-E’s new program, Robust Affordable Next Generation Energy Storage Systems (RANGE) ( earlier post ), aims to accelerate widespread EV adoption by dramatically improving driving range and reliability, and by providing low-cost, low-carbon alternatives to today’s vehicles. University of Houston. Princeton University.

Lithium Ion 360

Lithium Ion Range Zinc Air San Diego 360

Green Car Congress

MARCH 21, 2019

Lumotive, a Bill Gates-funded startup developing LiDAR systems for autonomous vehicles, introduced a beam-steering technology which will significantly improve the performance, reliability and cost of LiDAR systems for the emerging self-driving car industry.

Taxi 277

Taxi Vehicles Low Cost Light 277

Green Car Congress

APRIL 5, 2017

A Li-air battery, with its air cathode, is a low-cost system, Anandan said. However, key drawbacks to the Li-air system are its relatively low practical energy density, low cycle life and the complexity of the system, Anandan said. However, SSBs suffer from low current density, and low cycle life.

Energy Storage 186

Energy Storage Ford Li-ion Energy 186

Green Car Congress

OCTOBER 15, 2019

Researchers at the Department of Energy’s SLAC National Accelerator Laboratory and Stanford University have shown for the first time that a low-cost, non-precious metal cobalt phosphide (CoP) catalyst catalyst can split water and generate hydrogen gas for hours on end in the harsh environment of a commercial device.

Hydrogen 218

Hydrogen Commercial Polymer Connecticut 218

Green Car Congress

MARCH 22, 2012

These university-industry partnerships will receive almost $34 million in total project support. The newly funded projects are: Low Platinum PEM Fuel Cells. This project is led by Steven Holdcroft, Simon Fraser University, in partnership with Automotive Fuel Cell Corporation, Ballard Power Systems, Hyteon Inc.,

Canada 262

Canada Li-ion Fuel Batteries 262

Green Car Congress

MARCH 7, 2013

The “H2USA” name was used before by DOE in a program that began in 2005 to develop hydrogen technology learning centers at universities within the State Technologies Advancement Collaborative (STAC) hydrogen project area.). will optimize the cost and performance of composite cylinders for hydrogen storage using a graded construction.

Hydrogen 218

Hydrogen Carbon Fiber Transportation Fuel 218

Green Car Congress

DECEMBER 2, 2018

a developer of low-cost, high-performance polymers for electrochemical applications, announced its selection by the US Department of Energy’s Advanced Research Projects Agency-Energy (ARPA-E) for an award that will support the continued development of its alkaline exchange ionomers and membranes. Ecolectro Inc.,

Polymer 261

Polymer Fuel New York Hydrogen 261

Green Car Congress

SEPTEMBER 16, 2016

million in funding to a team that includes 24M, Sepion Technologies , Berkeley Lab, and Carnegie Mellon University. The funds will be used to develop novel membranes and lithium-metal anodes for the next generation of high-energy-density, low-cost batteries. Click to enlarge.

Li-ion 150

Li-ion Lithium Ion Energy Polymer 150

Green Car Congress

NOVEMBER 22, 2011

Vorbeck, a manufacturer and developer of applications using its proprietary graphene material ( earlier post ), optioned the technology for use in a graphene-based electrode for lithium-air and lithium-sulfur batteries. The company’s business plan is based on manufacturing devices to detect pests in buildings.

America 240

America Building Fuel Batteries 240

Green Car Congress

JULY 6, 2010

The US Department of Energy (DOE) has offered a conditional commitment to Abound Solar , a manufacturer of low-cost, cadmium telluride, thin-film photovoltaic solar modules, for a $400 million, seven-year loan guarantee to expand its solar module manufacturing capabilities. and begun commercial operations.

Solar 186

Solar Colorado 2007 Low Cost 186

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.) ORNL began accepting license applications in March 2016. —Greg LeMond.

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

JULY 14, 2015

Advanced Materials and Manufacturing Processes for MW-scale SOFC Power Systems for Improved Stack Reliability, Durability, and Cost LGFCS will qualify a material and process solution for selected metallic components of an advanced integrated stack block. DOE: $2,500,000 Non DOE: $625,149 Total: $3,125,149 (20% cost share).

Fuel 150

Fuel West Virginia Low Cost Universal 150

Green Car Congress

APRIL 6, 2010

Keio University spin-out ELIIY Power Co., has begun operations at its new Li-ion battery manufacturing plant in Kawasaki. Built at a cost of roughly 5 billion yen, the plant can make lithium ion battery cells with a charge capacity of 150 watt-hours at a rate of 200,000 cells a year. Earlier post.).

Li-ion 186

Li-ion Lithium Ion Batteries Battery 186

Green Car Congress

AUGUST 10, 2011

This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

DECEMBER 11, 2016

However, no specific model has existed to examine the costs of manufacturing these cylindrical cells. To date, manufacturing process research and cost models have focused exclusively on prismatic cells, and there is no specific model to address the costs of manufacturing cylindrical cells.

Li-ion 150

Li-ion Lithium Ion Price Batteries 150

Green Car Congress

JUNE 21, 2017

A team at the Warwick Manufacturing Group (WMG), University of Warwick (UK) has developed a new processing route which allows low-density steel-based alloys to be produced with maximum strength, while remaining durable and flexible—something which has been largely impossible until now. —Dr Alireza Rahnama.

Production 150

Production Manufacturer Low Cost 2017 150

Green Car Congress

FEBRUARY 22, 2011

introducing and optimizing the butanol synthetic pathway in the species with high butanol tolerance; and overcoming the glucose repression effect to utilize low-cost non-grain based feedstocks. 2011) Current status and prospects of biobutanol manufacturing technology.

Production 186

Production Chinese Low Cost 2011 186