Green Car Congress

APRIL 12, 2012

Ford Motor Company is partnering with Dow Automotive Systems, a business unit of The Dow Chemical Company, to research the use of advanced carbon fiber composites in high-volume vehicles. Carbon fiber composites have been used in aerospace and racing cars for decades due to their unique combination of high strength and low mass.

Carbon Fiber 247

Carbon Fiber Carbon Ford Vehicles 247

Cars That Think

JULY 23, 2024

This scenario played out in May at the Routes de l’Oise cycling competition near Paris, and the van was believed to contain evidence of a distinctly 21st-century cheat: a hidden electric motor. Cyclists call it “motor doping.” Motor doping has only been confirmed once in professional cycling, way back in 2016.

Motors 139

Motors Motor Motoring 2018 139

Green Car Congress

JANUARY 5, 2022

The two motors of the BMW iX M60 operate on the principle of a current-energized synchronous machine. This design method makes it possible to completely dispense with the rare earth metals required for magnetic components when manufacturing the rotor. Range is (preliminary EPA estimate) about 280 miles. kWh per 100 km (WLTP).

BMW 243

BMW Motors Motor Motoring 243

Cars That Think

JULY 2, 2024

Such a massive shift will inevitably mean far greater use of electric traction motors, nearly all of which rely on magnets that contain rare earth elements, which cause substantial environmental degradation when their ores are extracted and then processed into industrially useful forms. research on advanced motors for EVs.

Motors 132

Motors Motor Motoring Building 132

Green Car Congress

JUNE 24, 2020

will form a joint venture with NPROXX, a designer, developer and manufacturer of Type 4 pressure vessels for the storage of hydrogen under high pressure, for hydrogen storage tanks. NPROXX was formed in 2018 in a split from EMS, a leading supplier of high-quality carbon fiber products and specialist manufacturing services.

Hydrogen 418

Hydrogen Carbon Fiber Fuel Gas 418

Green Car Congress

MAY 20, 2022

Renault Scénic Vision is zero emission in production and in use with a 75% smaller carbon footprint than a conventional battery electric vehicle. Renault Scenic Vision’s 160 kW electrically excited synchronous motor derives directly from Renault Megane E-TECH Electric’s motor and is made at the plant in Cléon.

Hydrogen 482

Hydrogen Carbon Concept Hybrid 482

Green Car Congress

NOVEMBER 7, 2017

Automobili Lamborghini, a member of the Volkswagen Group, unveiled its new design concept for a future Lamborghini electric super sports car: the “Lamborghini of the Terzo Millennio”, developed in collaboration with two MIT laboratories. Two MIT labs—the Dinca Research Lab, led by Prof. For this reason, the cooperation with Prof.

MIT 150

MIT Carbon Fiber Design Concept 150

Green Car Congress

SEPTEMBER 8, 2014

A team led by Local Motors is 3D-printing a full vehicle body over 44 hours during the International Manufacturing Technology Show 2014 and will follow it up with a first drive set to take place the morning of Saturday, 13 September. SABIC’s LNP STAT-KON carbon fiber-reinforced compound. Click to enlarge. Earlier post.).

Motors 303

Motors Motor Motoring Carbon Fiber 303

Green Car Congress

MAY 8, 2019

Teijin Limited announced that its Sereebo carbon fiber reinforced thermoplastic (CFRTP) has been selected by General Motors (GM) for use in select pickup box applications. The CarbonPro bed features indentations specifically designed for tires of dirt and street bikes. 2019 GMC Sierra Denali CarbonPro Edition.

Carbon Fiber 207

Carbon Fiber GM Sierra GMC 207

Green Car Congress

AUGUST 18, 2021

Model-specific design elements 3D-printed. The ornamental grilles covering the BMW kidney grille, the lower and two outer air inlets and the body elements for the lower rear end trim all come from the BMW Group’s Additive Manufacturing Campus, which uses 3D printing to produce prototype and standard parts.

BMW 418

BMW Hydrogen Carbon Fiber Store 418

Teslarati

APRIL 18, 2024

Hyundai Motor Group plans to develop materials that enhance the performance of electric vehicles. To achieve this goal, it entered into a strategic partnership with Japanese material manufacturer Toray Industries. Hyundai Motor of America shared reported that its EV sales grew 100%. Hyundai has been making waves in the U.S.

Hyundai 132

Hyundai Carbon Fiber Georgia Polymer 132

Green Car Congress

NOVEMBER 3, 2017

the core company of the Teijin Group’s carbon fibers and composites business, has developed a lightweight multi-material roof cover for a fuel-cell bus made of carbon-fiber reinforced plastic (CFRP), aluminum and other lightweight engineering plastics. Toho Tenax Co., Toho Tenax collaborated with GH Craft Ltd.,

Carbon Fiber 150

Carbon Fiber Fuel Corporation Carbon 150

Green Car Congress

JULY 1, 2022

In a seamless transition, further e-drive components will be manufactured there with immediate effect in addition to producing high-voltage battery modules, which is already being done since May 2021. The 135 kW/184 hp electric motor of the BMW i3s (power consumption combined: 16.6 - 16.3 kWh/100 km according to WLTP, 14.6 - 14.0

BMW 435

BMW Production Wind Energy Storage 435

Charged EVs

MAY 18, 2021

In Issue 49, we reviewed some of the more promising advancements in materials and construction techniques for EV traction motors , one of which—the axial flux design—will be the focus of this article. What really changed the situation for axial flux motors were advancements in both permanent magnets and composite materials.

Motors 99

Motors Motor Motoring Carbon Fiber 99

Green Car Congress

JANUARY 13, 2015

Local Motors is 3D printing and assembling a Strati—the first 3D-printed car—live from the show floor at the North American International Auto Show (NAIAS). The design was chosen in May 2014 from more than 200 submitted to Local Motors by the company’s online co-creation community after launching a call for entries.

Motors 150

Motors Motor Motoring Carbon Fiber 150

Green Car Congress

AUGUST 21, 2014

The newly selected projects are in five areas: energy storage; power electronics and electric motors (PEEM); advanced combustion engines; materials technologies, and fuels and lubricant technologies. Power electronics and electric motors (Area of Interest 2). Earlier post.). Awardees are: AWARD TABLE. Technology. Federal share.

Engine 231

Engine Carbon Fiber Fuel Battery 231

Get Electric Vehicle

MAY 14, 2024

Automotive manufacturers are increasingly turning to advanced AI-based software development solutions to realize the vision of automated vehicles. Let’s look at how different stages of the manufacturing process are being influenced by AI: a. Electric mobility has revolutionized interior features and amenities. . #4

Manufacturer 59

Manufacturer Vehicles Electric Electrical 59

Green Car Congress

NOVEMBER 12, 2020

With its completely newly developed design, the electric BMW iX is the first representative of a generation of cars intended to redefine the driving experience, the feeling of space inside and the relationship between vehicles and those on board. Fifth-generation BMW eDrive technology.

BMW 321

BMW Future Carbon Fiber Electric 321

Green Car Congress

APRIL 11, 2017

The Qoros Model K-EV will feature an individually powered, high-performance, all-wheel drive system, utilizing the same high performance electric drive-line technology also found in Koenigsegg’s Regera , the limited production plug-in hybrid supercar designed by the Swedish supercar manufacturer. The Koenigsegg Regera drive technology.

2017 150

2017 Carbon Fiber Concept Auto 150

Green Car Congress

AUGUST 13, 2012

These projects include the development and validation of modeling tools to deliver higher performing carbon fiber composites and advanced steels, as well as research into new lightweight, high-strength alloys for energy-efficient vehicle and truck engines. Fiber Thermoplastic Composites. carbon fiber thermoplastic composites.

Carbon Fiber 231

Carbon Fiber Carbon Fuel Economy United States 231

Green Car Congress

JULY 12, 2013

Describing its product goals and tracking progress toward its 2020 manufacturing priorities in its 2012 Sustainability Report , General Motors reaffirmed its commitment to further reduce the energy used and the environmental impacts of building and operating an automobile. Manufacturing energy use and emissions. Earlier post.).

GM 275

GM MPG Manufacturer 2017 275

Green Car Congress

AUGUST 29, 2019

Polestar also announced its World Manufacturing Identifier, which officiates the brand as a standalone car company. The new Polestar Production Center in Chengdu, China will produce the Polestar 1—a carbon fiber-bodied Electric Performance Hybrid. Polestar Chengdu; the marriage point.

Production 207

Production Volvo Carbon Fiber Electric 207

Green Car Congress

NOVEMBER 13, 2020

However, the transition from ICEs to BEVs changes both the goals and the design considerations around lightweighting, Lux says. Key changes include: Range: BEVs are overwhelmingly more efficient than ICE vehicles due to regenerative braking and more efficient motors.

Electric Vehicles 243

Electric Vehicles Battery Batteries Vehicles 243

Green Car Congress

MARCH 6, 2017

At the Geneva Motor Show, INFINITI is unveiling the Project Black S concept, exploring the potential for a new INFINITI performance grade, featuring on-road technology inspired by Formula One. Design work has been led by INFINITI’s London studio in Paddington, under the management of the INFINITI Global Design Center in Japan.

Infinity 170

Infinity Carbon Fiber Hybrid Concept 170

Green Car Congress

JUNE 4, 2014

Ford Motor Company unveiled its Lightweight Concept vehicle, which uses advanced materials to explore future weight-reduction solutions that could improve performance and fuel efficiency while reducing CO 2 emissions. 19” by 5” carbon fiber wheels. Carbon fiber interior components. Ford Lightweight Concept.

Carbon Fiber 225

Carbon Fiber Light Concept Ford 225

Green Car Congress

FEBRUARY 28, 2023

The BMW Group sources the individual fuel cells from the Toyota Motor Corporation. Fuel cell systems are manufactured in two main steps, based on the individual fuel cells. The stack housing is manufactured in the light metal foundry at BMW Group Plant Landshut using a sand casting technique.

BMW 259

BMW Hydrogen Fleet Lithium Ion 259

Green Car Congress

DECEMBER 14, 2009

Kepler Motors, founded by World Speed Record Holder Russ Wicks, is unveiling its MOTION supercar at this year’s Dubai International Motor Show, 16-20 December. liter V6 driving the rear wheels acting independently of a 250 hp (186 kW) electric motor driving the front wheels. Only 50 MOTIONs will ever be produced.

Carbon Fiber 170

Carbon Fiber Motors Motor Motoring 170

Baua Electric

AUGUST 27, 2024

The vessel features a massive battery pack with DC charging capabilities, and its hydrofoil design enables impressive range on the water. ENVGO is a new electric boat manufacturer led by a team of executives with backgrounds in robotics and tech. The motor is powered by an 80 kWh battery pack that can deliver up to 80 miles of range.

DC 52

DC Miles Range Charging 52

Green Car Congress

JANUARY 18, 2014

Sample topic areas that might address one or more of these barriers include: Novel cell, module or pack designs that significantly improve the thermal or safety performance, or significantly reduce the weight, volume, and cost of non? conventional manufacturing machinery or equipment. Carbon Fiber or Lightweight Materials.

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

DECEMBER 12, 2011

DOE’s Pacific Northwest National Laboratory, in collaboration with Ford Motor Company, Lincoln Composites, Toray Carbon Fibers America, Inc. The project will focus on improving carbon fiber composite materials and the design and manufacture of hydrogen storage tanks. and AOC Inc.,

Hydrogen 330

Hydrogen Carbon Fiber Oregon Alabama 330

Green Car Congress

APRIL 2, 2020

The e-tron houses two asynchronous electric motors (ASM) that produce up to 402 horsepower in boost mode. A more powerful, three-motor variant with fully independent rear torque vectoring is also under development. By comparison, an asynchronous motor’s rotor rotates slower than a synchronous speed.

Audi 300

Audi SUV Concept All-Electric 300

Baua Electric

FEBRUARY 3, 2024

The company has displayed EV components such as electric motors and e-drivetrains under its joint venture, Anand Mando Electric Mobility (AMEM). These components that are relevant for both ICE and EVs leverage alternative materials such as composites and carbon fiber to deliver weight reduction benefits.

Carbon Fiber 52

Carbon Fiber India Japan Range 52

Green Car Congress

AUGUST 10, 2011

Ford Motor Company. Ford Motor Company. This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. Increased availability of low cost carbon fiber can enable vehicle weight reduction and improvement in fuel economy. Plasan Carbon Composites. valve train vs. bearings).

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

APRIL 13, 2016

Designed, engineered and hand-built by graduate students at Clemson University’s International Center for Automotive Research ( CU-ICAR ), the vehicle is the result of a two-year collaboration with Toyota Motor North America designers and engineers.

Congress 150

Congress Toyota Concept Carbon Fiber 150

The Truth About Cars

JULY 17, 2024

Cadillac has updated the Escalade for the 2025 model year and the end result is a vehicle that has tilted to embrace the design of its battery electric siblings. A head-up display will be standard on certain trims, with General Motors night vision being standard on V-Series or Platinum trims and available to option elsewhere.

Escalade 105

Escalade Cadillac Engine Diesel 105

Green Car Congress

AUGUST 19, 2023

—Stephan Winkelmann, Chairman and CEO of Automobili Lamborghini A high specific power electric motor on each axle ensures permanent all-electric drive in every condition, surface and driving style and a peak power of over one megawatt. The visually concealed louvers therefore provide downforce without creating additional drag.

Concept 370

Concept Electric Electrical Carbon 370

Green Car Congress

JANUARY 31, 2017

McLaren Automotive has launched a strategic project to design and develop technology for the next generation of powertrains. McLaren Automotive will work with its existing engine manufacturing partner, Ricardo, and BMW Group while Grainger and Worrall will deliver complex, lightweight casting technology.

Parts 150

Parts Carbon Fiber Engine BMW 150