Green Car Congress

JULY 1, 2022

The serial production of the BMW i3 has ended , some eight and a half years after it was launched. In a seamless transition, further e-drive components will be manufactured there with immediate effect in addition to producing high-voltage battery modules, which is already being done since May 2021.

BMW 435

BMW Production Wind Energy Storage 435

Green Car Congress

OCTOBER 22, 2020

Teijin has joined the AZL Partner Network for Lightweight Production Technology , a cross-industry network for joint business development and technology development organized by service and engineering provider AZL Aachen GmbH and involving nine institutes and some 80 companies in the field of lightweight production. © AZL Aachen GmbH.

Czech Republic 221

Czech Republic Production Carbon Fiber Portugal 221

Green Car Congress

OCTOBER 29, 2014

the core company of the Teijin Group’s carbon fibers and composites business, has developed a new technology—Tenax Part via Preform (PvP)—for highly efficient production of thermoset carbon fiber-reinforced plastic (CFRP). Toho Tenax Co., Expensive intermediate steps are not necessary.

Carbon Fiber 218

Carbon Fiber Production Carbon Waste 218

Green Car Congress

MARCH 9, 2011

Teijin Limited has achieved a significant reduction in the cycle time required for molding carbon fiber reinforced plastic (CFRP) automobile cabin frame, bringing it to less than one minute. Long-fiber thermoplastic pellet: high-strength pellet made from carbon fiber, suited for injection molding of complex parts.

Carbon Fiber 199

Carbon Fiber Carbon Automobile Concept 199

Revenge of the Electric Car

APRIL 12, 2010

2009 BMW Concept ActiveE. BMW MegaCity Urban Electric Car To Be Built of Carbon Fiber. First, the raw feedstock to make carbon fibers–just call it a “polacrylonitrile-based precursor&# –is made in Japan by a joint venture between SGL and Mitsubishi Rayon and flown to the U.S. April 7th, 2010.

Carbon Fiber 133

Carbon Fiber BMW Carbon Mitsubishi 133

Green Car Congress

APRIL 6, 2010

SGL Automotive Carbon Fibers LLC, the joint venture between SGL Group and BMW Group ( earlier post ), will build a carbon fiber manufacturing plant in Moses Lake, WA. In the next step, the facility in Moses Lake will convert the polyacrylic fibers into the actual carbon fibers.

Carbon Fiber 220

Carbon Fiber BMW Carbon Building 220

Green Car Congress

JANUARY 24, 2020

This investment will support transformational research and development (R&D), innovative hydrogen concepts that will encourage market expansion and increase the scale of hydrogen production, storage, transport, and use. Concept papers are due 25 February 2020 and full applications are due 20 April 2020.

Market 207

Market Carbon Fiber Hydrogen Energy Storage 207

Green Car Congress

AUGUST 18, 2021

Two years after unveiling the BMW i Hydrogen NEXT concept car, BMW will present the BMW iX5 Hydrogen at the IAA Mobility 2021 in Munich in September. Additive manufacturing enables fast and highly flexible production of components—some of which have geometric shapes that cannot be realized with conventional production methods.

BMW 418

BMW Hydrogen Carbon Fiber Store 418

Green Car Congress

JUNE 4, 2014

Ford Lightweight Concept. Ford Motor Company unveiled its Lightweight Concept vehicle, which uses advanced materials to explore future weight-reduction solutions that could improve performance and fuel efficiency while reducing CO 2 emissions. —Raj Nair, Ford group vice president, Global Product Development.

Carbon Fiber 225

Carbon Fiber Light Concept Ford 225

Green Car Congress

OCTOBER 30, 2009

SGL Group and BMW Group have formed a 51:49 joint venture to manufacture carbon fibers and fabrics for the automotive industry. The joint venture will be operated through two companies, one based in North America (SGL Automotive Carbon Fibers LLC), and the other in Germany (SGL Automotive Fibers GmbH & Co KG).

Carbon Fiber 186

Carbon Fiber BMW Carbon Mitsubishi 186

Green Car Congress

NOVEMBER 7, 2017

Automobili Lamborghini, a member of the Volkswagen Group, unveiled its new design concept for a future Lamborghini electric super sports car: the “Lamborghini of the Terzo Millennio”, developed in collaboration with two MIT laboratories. Now we are presenting an exciting and progressive concept car. Energy storage systems.

MIT 150

MIT Carbon Fiber Design Concept 150

Green Car Congress

SEPTEMBER 21, 2018

On display at the event are its electric powertrain solutions, including a new hydrogen fuel cell concept powertrain developed by FPT for IVECO. The core of the new FPT Industrial electromobility offering is the E-Powertrain Concept with new E-Axle. Hydrogen fuel cell powertrain concept. The engine has a displacement of 2.3

Concept 236

Concept Industrial Industry Fuel 236

Green Car Congress

MAY 14, 2019

In collaboration with SGL Carbon, Chinese automotive manufacturer NIO has developed prototypes for battery enclosures made of carbon-fiber reinforced plastic (CFRP) for its NIO high performance electric vehicles. These features fit perfectly to the core values of NIO brands of ultimate product and system efficiency.

Carbon Fiber 207

Carbon Fiber Carbon Batteries Battery 207

Green Car Congress

DECEMBER 17, 2019

The initial H2@Scale FOA, released by EERE in FY19, focused on enabling R&D for hydrogen production, transport, and storage, as well as first-of-kind pilot demonstrations of integrated systems with on-site nuclear power and multiple renewable energy sources. Potential topics under the FOA include: Electrolyzer Manufacturing R&D.

Market 195

Market Carbon Fiber Hydrogen Mariner 195

Green Car Congress

APRIL 11, 2017

Qoros Automotive will reveal Qoros Model K-EV, its newest high-performance electric concept car, at Shanghai Auto 2017. Qoros plans to put Model K-EV into mass production in 2019. Qoros Model K-EV is built with “Clever Carbon Cabin” (CCC) technology, a seamlessly-integrated cabin made primarily from carbon fiber.

2017 150

2017 Carbon Fiber Concept Auto 150

Baua Electric

JANUARY 19, 2024

Last week at CES in Las Vegas, Honda provided a first look at future EV models planned for 2026 with the Saloon and Space-Hub concepts. Honda Saloon Concept – 2024 CES Sized in the middle of Honda’s EV future. Initial 0 Series production models will start in the “mid-large” segment. made, and they’ll arrive in the U.S.

Honda 52

Honda Carbon Fiber Concept Las Vegas 52

Green Car Congress

NOVEMBER 18, 2011

percent stake in SGL Carbon SE, reflecting its strengthening of focus on lightweight construction and the use of carbon fibre reinforced plastics (CFRP) in automobile manufacture. The BMW Group and the SGL Group already operate a joint venture, SGL Automotive Carbon Fibers (B Earlier post.).

BMW 255

BMW Carbon Fiber Carbon Automobile Manufacturer 255

Green Car Congress

MARCH 15, 2023

As well as a monocoque made entirely of multi-technology carbon fiber, it features a front structure in Forged Composites; a special material made of short carbon fibers soaked in resin. The LB744 is also the first super sports car to be fitted with a 100% carbon fiber front structure.

Carbon Fiber 243

Carbon Fiber Carbon Concept Polymer 243

Green Car Congress

SEPTEMBER 8, 2014

A team led by Local Motors is 3D-printing a full vehicle body over 44 hours during the International Manufacturing Technology Show 2014 and will follow it up with a first drive set to take place the morning of Saturday, 13 September. SABIC’s LNP STAT-KON carbon fiber-reinforced compound. Earlier post.). Earlier post.).

Motor 303

Motor Motors Motoring Carbon Fiber 303

Green Car Congress

FEBRUARY 28, 2023

—Oliver Zipse, Chairman of the Board of Management of BMW AG The BMW iX5 Hydrogen developed on the basis of the current BMW X5 was first unveiled as a concept at the IAA show in 2019. Fuel cell systems are manufactured in two main steps, based on the individual fuel cells. Earlier post.)

BMW 259

BMW Hydrogen Fleet Lithium Ion 259

Green Car Congress

MARCH 6, 2017

At the Geneva Motor Show, INFINITI is unveiling the Project Black S concept, exploring the potential for a new INFINITI performance grade, featuring on-road technology inspired by Formula One. liter twin-turbo V6 engine, and VC-Turbo, the world’s first production-ready variable compression ratio engine.

Infinity 170

Infinity Carbon Fiber Hybrid Concept 170

Green Car Congress

JULY 12, 2013

Describing its product goals and tracking progress toward its 2020 manufacturing priorities in its 2012 Sustainability Report , General Motors reaffirmed its commitment to further reduce the energy used and the environmental impacts of building and operating an automobile. Manufacturing energy use and emissions. Earlier post.).

GM 275

GM MPG Manufacturer 2017 275

Green Car Congress

SEPTEMBER 19, 2013

In collaboration with KraussMaffei, Henkel has developed a process for the manufacture of components based on glass or carbon fiber and using high-pressure resin transfer molding (HP-RTM) technology that creates a surface quality good enough for automobile exteriors.

Carbon Fiber 186

Carbon Fiber Production Carbon Manufacturer 186

Green Car Congress

APRIL 23, 2020

For example, the S-in motion Battery Pack concept includes design options with a tray, without a tray, and different material strategies are considered. Today, BEV manufacturers are convinced that lightweighting remains a major topic for BIW design. Lightweighting emerges as a major factor in BEV design. —Jérôme Favero.

Carbon Fiber 365

Carbon Fiber Emissions Carbon Batteries 365

Green Car Congress

NOVEMBER 12, 2020

Conceived from the outset as purely electric mobility, the iX sees BMW redefining the successful Sports Activity Vehicle (SAV) concept. The BMW iX will go into production at BMW Plant Dingolfing in the second half of 2021 and is scheduled to arrive on US shores in early 2022. Fifth-generation BMW eDrive technology.

BMW 321

BMW Future Carbon Fiber Electric 321

Green Car Congress

SEPTEMBER 4, 2011

To advance the symbiosis between electromobility and lightweight construction, engineers from the Fraunhofer Institute Germany are developing manufacturing concepts that have the goal of gradually replace individual components in the vehicle with more lightweight ones—but without affecting stability of the safety of the passenger.

Batteries 273

Batteries Battery Production Carbon Fiber 273

Green Car Congress

JUNE 12, 2011

Audi is presenting the Audi e-tron Spyder concept plug-in diesel hybrid car ( earlier post ) against the backdrop of “Le Mans vers le futur,” an event held in Le Mans as a venue for manufacturers to showcase innovative drivetrain technologies. The production SUV will go on sale before the end of 2011. kWh of energy.

Audi 329

Audi Plug-in Hybrid Concept 329

Green Car Congress

APRIL 28, 2010

has signed a Joint Development Agreement (JDA) with Daimler AG to develop automobile parts made of carbon fiber reinforced plastics (CFRP). As the world’s largest manufacturer of carbon fiber, Toray has identified expansion of its Carbon Fiber Composite Materials Business in the automotive field as one of its top priorities.

Automobile 210

Automobile Carbon Fiber Parts Mercedes 210

Green Car Congress

NOVEMBER 18, 2016

The US Department of Energy (DOE) announced approximately $30 million in available funding ( DE-FOA-0001647 ), subject to appropriations, for research and development of low-cost hydrogen production, onboard hydrogen storage, and proton exchange membrane fuel cells to advance the widespread commercialization of fuel cell electric vehicles.

Hydrogen 150

Hydrogen Fuel Carbon Fiber Water 150

Green Car Congress

OCTOBER 31, 2013

This includes, but is not limited to, novel tank designs and cost reduction concepts; carbon fiber reduction or elimination; Type III and Type IV tanks with alternative liner materials; conformable tank designs; alternative operating conditions (e.g., develop novel, advanced hydrogen storage technologies.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

DECEMBER 12, 2014

A fiber-reinforced composite leaf spring based on the polyurethane matrix resin Loctite MAX 2 from Henkel is being used in the chassis of the new Volvo XC90, a premium crossover SUV of which the innovative rear axle concept is to serve as a platform for other model series.

Volvo 186

Volvo SUV Carbon Fiber Concept 186

Green Car Congress

APRIL 22, 2010

A Concept ActiveE is in the background. The Megacity Vehicle will be the Group’s first series-production electric-drive model on the market. Ultra-light and high-strength composite CFRP (carbon fibre-reinforced plastic) will play a significant part in the materials mix, the company said. Click to enlarge. Earlier post.).

Mini E 199

Mini E BMW China 2013 199

Green Car Congress

APRIL 2, 2020

In the US, Audi has already introduced five production models: the Audi Q5 TFSI e, A7 TFSI e and A8 TFSI e plug-in hybrid electric vehicles (PHEV) as well as the e-tron all-electric SUV and upcoming e-tron Sportback. seconds and 124 mph in just over 12 seconds in production form. J1: The performance electric platform.

Audi 300

Audi SUV Concept All-Electric 300

Green Car Congress

SEPTEMBER 18, 2015

This includes developing advanced manufacturing and process technologies for advanced battery materials, advanced electrode and cell fabrication manufacturing, and integrated wide band gap power modules for next generation plug-in vehicles. Ultra-Light Door Design, Manufacturing and Demonstration (Area of Interest 2).

Fuel 150

Fuel Carbon Fiber Lithium Ion Vehicles 150

Green Car Congress

AUGUST 10, 2011

This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

JANUARY 13, 2015

Local Motors will showcase the proprietary three-phased manufacturing process for 3D-printing cars during NAIAS 2015. The first phase in 3D-printed manufacturing is additive. Made from a carbon fiber reinforced thermoplastic material by SABIC, the current model of the Strati takes approximately 44 hours to print 212 layers.

Motor 150

Motor Motors Motoring Carbon Fiber 150

Teslarati

OCTOBER 19, 2022

And in 2021, the company debuted the iX5 Hydrogen fuel cell concept car at the International Motor Show in Germany. Just this past August, BMW also started the manufacturing of fuel cell systems for the production variant of the iX5 SUV, a vehicle that, according to Zipse, would be marketed in the US.

BMW 72

BMW Hydrogen Electric Cars Carbon Fiber 72