Green Car Congress

MARCH 2, 2023

V for neutral NaAlCl 4 ) contributed by the acidic chloroaluminate cathode reaction, unlocking an additional specific energy of ∼119 Wh kg −1 by utilizing the conversion of NaAlCl 4 to NaAl 2 Cl 7 , which adds to the neutral melt reaction between NaAlCl 4 /Al and Na (∼493 Wh kg −1 theoretical). mAh cm −2 , a discharge duration of 28.2

Molten Salt 396

Molten Salt Grid Design Sodium 396

Green Car Congress

SEPTEMBER 30, 2011

High Performance, Low Cost Superconducting Wires and Coils. for High Power Wind Generators The University of Houston will develop a new, low-cost. superconducting wire that can be used in future advanced wind turbine generators. has traditionally been too expensive to use in wind generators.

Energy 294

Energy Cleaning Clean Grid 294

Green Car Congress

JANUARY 28, 2019

Unlike the electrode materials found in most lithium-ion batteries, Prussian blue enjoys a widespread availability and low cost that make batteries based on Prussian blue electrodes an economically attractive, environmentally friendly technology. Motallebi, C.W. Valencia, H.S. Fujimoto, L.A. Yang, and C.D.

Chevron 288

Chevron Sodium Energy Batteries 288

Green Car Congress

NOVEMBER 28, 2012

Natural Gas Reactor for Remote Chemical Conversion. sunlight through low-cost, plastic light-guiding sheets and then. Turbo-POx For Ultra Low-Cost Gasoline. conversion of natural gas to liquid fuels. combustor of a natural gas turbine, facilitating its conversion into a. If successful, this.

2012 240

2012 Energy Lithium Sulfur Gas-Electric 240

Green Car Congress

OCTOBER 26, 2009

Eagle Picher, in partnership with the Pacific Northwest National Laboratory, will develop a new generation of high energy, low cost planar liquid sodium beta batteries for grid scale electrical power storage applications. Low Cost, High Energy and Power Density, Nanotube-Enhanced Ultracapacitors. DOE grant: $7,200,000).

Energy 231

Energy Grant Low Cost Li-ion 231

Green Car Congress

NOVEMBER 25, 2012

The demonstration project will be conducted with the support of New Energy and Industrial Technology Development organization (NEDO) of Japan, under the program of “Development of Technology for Safe, Low-cost, Large-size Battery System.” In July 2010, MHI agreed with SSE to collaborate in the development of low-carbon energy.

Energy Storage 271

Energy Storage Power Grid Mitsubishi Li-ion 271

Green Car Congress

NOVEMBER 17, 2010

In support of the biomass fractionator, the company is also developing a range of one-step catalytic conversion processes which mate with the fractionator’s output gas streams to produce products such as eBTX (high octane gasoline), synthetic diesel and proprietary ultra-high crop yield “super” fuels. Click to enlarge.

Gasoline 247

Gasoline Energy Gasoline-Electric Carbon 247

Green Car Congress

DECEMBER 3, 2020

Electrolyzers will use wind power to produce green hydrogen. The Haru Oni pilot project in Magallanes Province takes advantage of the excellent wind conditions in southern Chile to produce climate-neutral fuel with the aid of green wind power. Enel is a co-funder of the plant, with a focus on wind power and electrolysis.

Chile 221

Chile Porsche Climate Energy 221

Green Car Congress

NOVEMBER 25, 2020

The National Renewable Energy Laboratory will expand its open-source Wind Energy with Integrated Servo- control (WEIS) toolbox to include control co-design capabilities of tidal and riverine hydrokinetic turbines. Bio-Inspired Renewable Energy (BIRE) for Highly-Efficient Low-cost Riverine Hydrokinetics - $3,500,000. Emrgy, Inc.

Mariner 418

Mariner Universal Grid Water 418

Green Car Congress

OCTOBER 13, 2016

The researchers’ initial analysis suggests that the spiky textured surface of the catalysts provides ample reactive sites to facilitate the carbon dioxide-to-ethanol conversion. For instance, the process could be used to store excess electricity generated from variable power sources such as wind and solar. Hensley, D. Bonnesen, P.

Conversion 150

Conversion CO2 Carbon Water 150

Green Car Congress

JANUARY 21, 2021

Critical materials are used in many products important to the US economy and energy technologies, such as rare-earth elements used to manufacture high-strength magnets for offshore wind-turbine generators and lithium and cobalt in lithium-ion batteries for electric vehicles.

Li-ion 321

Li-ion Wyoming Lithium Ion Corporation 321

Green Car Congress

NOVEMBER 25, 2013

The US Department of Energy (DOE) Advanced Research Projects Agency - Energy (ARPA-E) will award up to $30 million to fund a new program focused on the development of transformational electrochemical technologies to enable low-cost distributed power generation. DE-FOA-0001026 ). Source: ARPA-E. Click to enlarge. Source: ARPA-E.

Fuel 231

Fuel Power Powered Gas-Electric 231

Green Car Congress

APRIL 20, 2011

Technologies for low-cost production of advanced biofuels are limited by the small amount of available energy captured by photosynthesis and the inefficient processes used to convert plant matter to fuel. If successful, PETRO will create biofuels for half their current cost, finally making them cost-competitive with fuels from oil.

Grid 231

Grid Solar Power Powered 231

Green Car Congress

OCTOBER 13, 2009

The “smart” buoys, based on integrated patented hydrodynamics, electronics, energy conversion and computer control systems, capture and convert energy from the natural rising and falling of waves into low-cost, clean electricity. and Japan Wind Development Co. OPT’s latest version is its PB150 PowerBuoy.

Power 240

Power Powered Oregon Japan 240

Green Car Congress

OCTOBER 30, 2013

The TomKat Center looks at generation and conversion, transmission and distribution, storage, and land and water as they pertain to energy for electricity and transportation. Making Large Wind Farms More Productive, Less Expensive. Carbon Capture and Conversion (CCC) Fuel Cells Hybrids' TomKat Center awards.

Energy 210

Energy Fuel Hybrid CO2 210

Green Car Congress

FEBRUARY 27, 2010

For future scenarios where vehicle technology costs were sufficiently competitive to advantage either hydrogen or electric vehicles, the increased availability of low-cost, low-CO 2 electricity/hydrogen provided more cost-effective CO 2 mitigation opportunities in the heat and power energy sectors than in transportation.

Hydrogen 236

Hydrogen Low CO2 Available Fleet 236

Green Car Congress

SEPTEMBER 17, 2012

This project explores the use of specially designed nanostructured polymers to make high-energy, low-cost, flexible and stretchable batteries. The long-term goal of this project is to develop a water-splitting device that operates at high temperatures (up to 400 °C), dramatically improving solar-to-hydrogen conversion efficiencies.

Energy 239

Energy Vehicles Power Powered 239

Green Car Congress

AUGUST 27, 2020

REEACH projects seek to create innovative, cost-effective, and high-performance energy storage and power generation sub-systems for electric aircraft, with a focus on fuel-to-electric power conversion technologies. The proposed system is projected to operate in cruising phase of flight with a 66% energy conversion efficiency.

Carbon 218

Carbon Hybrid Electrical Electric 218

Green Car Congress

JANUARY 22, 2011

In this topic, ARPA-E seeks to develop a new generation of ultra-high energy density, low-cost battery technologies for long electric range plug in hybrid electric vehicles and electric vehicles (EVs). ARPA-E currently has six main funded programs underway ( topic ): Batteries for Electrical Energy Storage in Transportation (BEEST).

Energy Storage 210

Energy Storage Renewable Power Powered 210

Green Car Congress

MARCH 24, 2016

A detailed analysis of the new process compared to a published baseline for conventional carbon fiber production examined manufacturing cost of nine major process steps, starting with the precursor and pretreatment and finishing with surface treatment, sizing, winding, inspection and shipping.

Carbon Fiber 150

Carbon Fiber Carbon Manufacturer Energy 150

Green Car Congress

JULY 10, 2022

The novel SMART-DAC technology is a natural wind driven process that captures CO 2 directly from air using membrane gas absorption with a liquid absorbent and regeneration of the absorbent by electrodialysis.

Carbon 305

Carbon Coal Gas-Electric Waste 305

Green Car Congress

JULY 10, 2010

Specifically, low cost and energy-efficient processes are sought that can be demonstrated and validated under field conditions to meet needs of the nascent algal biomass industry. Wind Technologies. saline water). The trend for higher-temperature electric machines requires higher-temperature PMs. Solar Technologies.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

FEBRUARY 15, 2022

The selected projects—spanning 22 states and coordinated at universities, national laboratories, and private companies—will advance technologies for a wide range of areas, including electric vehicles, offshore wind, storage and nuclear recycling. Stanford University. The Ohio State University. University of Washington.

Energy 284

Energy Cleaning Clean Li-ion 284

Green Car Congress

DECEMBER 3, 2021

The system will significantly increase methane conversion efficiency and comply with future stringent nitrous oxide regulations. The project team’s technology will consist of a novel methane oxidation catalyst (MOC) formulation capable of high conversion efficiencies at the lower exhaust temperatures in ultra-lean burn engines.

Gas 186

Gas Emissions Engine Coal 186

Green Car Congress

MARCH 2, 2010

Deploying advanced power electronics could provide as much as a 25-30% reduction in electricity consumption—or 12 % of total US energy consumption.

Energy Storage 199

Energy Storage Grid Energy Building 199

Green Car Congress

JULY 13, 2010

HRL Laboratories and its partners GM, Va Polytech, ORNL, Teledyne will receive $5,058,803 to develop efficient, compact, and low-cost battery chargers for electric cars. Grid energy storage will be needed to enable the widespread use of two key renewable energy sources: wind and solar power. and Case Western Reserve University.

Power 225

Power Powered Arkansas Grid 225

Green Car Congress

APRIL 26, 2016

The program is focused in two areas: (1) the synthesis of CNLFs using intermittent renewable energy sources and water and air (N 2 and CO 2 ) as the only chemical input streams; and (2) the conversion of CNLFs delivered to the end point to another form of energy (e.g. Fuel cost $/kg. Fuel cost, $/kWh. Transmission cost, $/kWh.

Renewable 150

Renewable Water Fuel Energy 150

Green Car Congress

DECEMBER 17, 2016

REFUEL projects will convert low-cost renewable energy into a transportable chemical fuel and use these fuels for transportation applications, while reducing production costs and environmental impact. Renewable Electricity-Powered Carbon Dioxide Conversion to Ethanol for Storage and Transportation (Category 1) The Opus 12, Inc.

Carbon 150

Carbon Fuel Energy Hydrogen 150

Green Car Congress

APRIL 30, 2010

Novel Biological Conversion of Hydrogen and Carbon Dioxide Directly into Biodiesel. This project will develop and optimize a novel, engineered microorganism that produces a biodiesel-equivalent fuel from renewable hydrogen and carbon dioxide, at costs of less than $2.50 OPX Biotechnologies Inc. NREL, Johnson Matthey Catalysts).

Carbon 249

Carbon Li-ion Batteries Battery 249

Green Car Congress

SEPTEMBER 5, 2023

Now we are accelerating Direct Air Capture technology that enables efficient and low-cost CO 2 capture—the future of CO 2 recycling. The Haru Oni facility is currently operating with biogenic CO 2 and hydrogen produced with the strong winds of the Magallanes region.

Chile 195

Chile Porsche Global Installation 195

Cars That Think

SEPTEMBER 8, 2024

Electrochemistry can help save the planet As the world embraces clean energy solutions such as wind turbines, electric vehicles, and solar panels to address the climate crisis, changing how we approach manufacturing becomes critical. The conversion is an essential step in steel production and the most emissions-spewing part.

Engine 134

Engine Production Cleaner Wind 134

Green Car Congress

JANUARY 27, 2023

This project will demonstrate the conversion of gaseous carbon wood wastes (terpenes) to renewable Terpenes SAF blending components. The pilot will consist of a low cost, easy to operate, air blown gasifier coupled with LanzaTech’s second generation bioreactor (2GBR). Viridos, Inc., “Pre-pilot

Production 225

Production Carbon Conversion Fuel 225

Green Car Congress

MAY 29, 2010

When incorporated into resins, fuzzy fibers enable composites to be tailored for electrical and thermal conductivity, chemical and biological sensing, energy storage and conversion, thermal management and other properties. This is going to disrupt the way we think about materials. Everybody is growing carbon nanotubes on substrates.

Carbon Fiber 170

Carbon Fiber Energy Production Ohio 170

Green Car Congress

NOVEMBER 17, 2014

Related to this, DOE seeks by 2020 to develop novel precursors and conversion processes capable of reducing the high-volume cost of high-strength carbon fiber by 25% from $13 per pound to ~$9 per pound. Projected costs, in 2013$, for BOP components for 700-bar compressed hydrogen storage systems produced at 500,000 systems per year.

Hydrogen 225

Hydrogen Carbon Fiber 2014 St. Louis 225

Cars That Think

MAY 13, 2022

8 (LA-8) is a distributed electric propulsion, vertical takeoff and landing (VTOL) aircraft that is being used for wind tunnel testing and free flight testing at the NASA Langley Research Center. sentiment, relationships, topic) from conversations to model privacy boundaries. Boston Dynamics ] The Langley Aerodrome No.

New York City 145

New York City Long Beach BBC Conversion 145

Green Car Congress

FEBRUARY 8, 2019

Drexel University aims to design a significantly more efficient, fast, low-cost, compact, and reliable circuit breaker for medium-voltage direct-current (MVDC) power system. The Ohio State University will develop gallium nitride (GaN) semiconductor materials suitable for high voltage (15-20 kV) power control and conversion.

Grid 207

Grid Transportation Industrial Industry 207

Green Car Congress

JANUARY 30, 2022

When produced with a mold, the material can take a range of shapes for a variety of applications, from car bumpers to wind turbine blades and more. When curing, molecules in the liquid resin bind with each other and around the woven carbon filaments, hardening into a strong and rigid lattice. We are not downcycling the material at all.

Carbon Fiber 150

Carbon Fiber Carbon Low Cost Wind 150