Green Car Congress

JULY 31, 2020

million from the US Department of Energy (DOE) to develop and validate technology that will reduce the cost of manufacturing high-performance carbon fiber by 25% to make composite natural gas or hydrogen fuel tanks to power cars and trucks. The Institute for Advanced Composites Manufacturing Innovation (IACMI) will receive $2.7

Carbon Fiber 246

Carbon Fiber Carbon Hydrogen Gas 246

Green Car Congress

JANUARY 30, 2022

Researchers at the National Renewable Energy Laboratory (NREL) have shown that making carbon fiber composites with bio-based epoxies and an anhydride hardener makes the material fully recyclable by introducing linkages that are more easily degraded. Synthesizing carbon fiber involves temperatures of more than 1,000 °C.

Carbon Fiber 150

Carbon Fiber Carbon Low Cost Wind 150

Green Car Congress

MARCH 25, 2019

The first prototype carbon fiber MonoCell, the tub that forms the main structure of McLaren’s cars, has been shipped from the company’s new £50-million (US$66-million) innovation and production center in Yorkshire to the McLaren Production center (MPC) in Woking, Surrey. First prototype carbon fibre chassis delivered from the MCTC.

Carbon Fiber 299

Carbon Fiber Carbon Bahrain Manufacturer 299

The Truth About Cars

JULY 27, 2023

The UK-based wheel specialist from Dymag and composites wizards from Korea's Hankuk Carbon have announced the development of a line of hybrid carbon-fiber wheels for Hyundai’s N cars.& Harmonic characteristics of carbon fiber are likewise supposed to help reduce noise, vibration, and harshness.

Carbon Fiber 98

Carbon Fiber Hyundai Carbon Hybrid 98

Green Car Congress

MAY 9, 2014

A production line for carbon fiber takes the PAN precursor through two stages (stabilization/oxidation and carbonization) and then to winding. The site expansion, scheduled to be completed by early 2015, will make the plant in Moses Lake the world’s largest carbon fiber plant. 3,000 tons of carbon fiber.

Carbon Fiber 338

Carbon Fiber Carbon BMW Production 338

CleanTechnica EVs

JANUARY 29, 2022

NREL researchers create plant-derived epoxy that enables recyclable carbon fiber. Ten times stronger than steel, nearly half the weight of aluminum, far stiffer than fiberglass — carbon fiber carries a package of advantages, making it a preferred material for use in luxury sedans and Formula One racecars alike.

Carbon Fiber 101

Carbon Fiber Carbon Electric Vehicles Market 101

Green Car Congress

MARCH 14, 2017

In pursuit of lower vehicle weight to reduce emissions and improve fuel efficiency, Magna International Inc., in cooperation with Ford Motor Company, developed a prototype carbon fiber composite subframe which reduces mass by 34% compared to making a stamped steel equivalent.

Carbon Fiber 247

Carbon Fiber Carbon Ford Shelby 247

Green Car Congress

MARCH 25, 2014

Magna Exteriors, an operating unit of Magna International, has been awarded new business to supply painted automotive body panels made from carbon fiber composite material for two 2016 model-year vehicles.

Carbon Fiber 252

Carbon Fiber Carbon Fuel Economy 2016 252

Green Car Congress

NOVEMBER 24, 2017

SGL Carbon SE is acquiring BMW Group’s 49% equity investment in the joint ventures SGL Automotive Carbon Fibers GmbH & Co. KG (Germany) and SGL Automotive Carbon Fibers LLC (US)—together referred to as SGL ACF. Carbon fibers and carbon fiber materials are at the core of SGL Group's corporate strategy.

Carbon Fiber 170

Carbon Fiber BMW Carbon Germany 170

Green Car Congress

JULY 2, 2017

Department of Energy (DOE) grant to continue their research in developing low-cost, high-strength carbon fiber. The center’s Carbon Materials Technologies Group received the award for a project titled “Precursor Processing Development for Low Cost, High Strength Carbon Fiber for Composite Overwrapped Pressure Vessel Applications.”

Carbon Fiber 150

Carbon Fiber Kentucky Carbon Low Cost 150

Green Car Congress

JANUARY 5, 2018

(SoCalGas) is partnering with a development team to advance a new process that converts natural gas to hydrogen, carbon fiber, and carbon nanotubes. The new catalyst system promotes “base growth” carbon nanotube formation rather than “tip growth,” the current technology. billion in 2016 and is expected to increase to $8.7

Carbon Fiber 280

Carbon Fiber West Virginia Hydrogen Carbon 280

Green Car Congress

JUNE 5, 2014

Woven carbon fiber can act as an electrode for lithium ion batteries. Researchers in Sweden are exploring the use of carbon fiber as an active electrode in a multifunctional structural Li-ion battery in an electric car; i.e., electrical storage is incorporated into the body of the car. Earlier post.). —Eric Jacques.

Carbon Fiber 317

Carbon Fiber Carbon Li-ion Electric Vehicles 317

Green Car Congress

JULY 30, 2014

million for two projects that aim to advance the production of cost-competitive, high-performance carbon fiber material from renewable, non-food-based feedstocks, such as agricultural residues and woody biomass. The US Department of Energy (DOE) will award up to $11.3

Carbon Fiber 273

Carbon Fiber Renewable Carbon Alabama 273

Green Car Congress

DECEMBER 8, 2017

Today, acrylonitrile is used in the production of acrylic fibers for carpets, clothes, and fabrics, and in plastics such as food containers, and packaging materials. The high acrylonitrile yield allows us to propose a potential industrial process for the conversion of lignocellulosic biomass to renewable acrylonitrile and carbon fibers.

Carbon Fiber 191

Carbon Fiber Renewable Carbon Eaton 191

Green Car Congress

OCTOBER 9, 2012

At the Composites Europe event in Dusseldorf, Ford Motor Company displayed a prototype carbon fiber reinforced plastic (CFRP) hood. Carbon fiber offers a very high strength-to-weight ratio; it is up to five times as strong as steel, twice as stiff, and one-third the weight. Earlier post.)

Carbon Fiber 294

Carbon Fiber Carbon Ford Downsizing 294

Green Car Congress

FEBRUARY 4, 2014

The US Department of Energy (DOE) will award ( DE-FOA-0000996 ) up to $12 million in funding to advance the development of a cost-competitive pathway to produce high-performance carbon fiber for vehicle lightweighting from renewable non-food biomass. Reducing a vehicle’s weight by just 10% can improve fuel economy by 6% to 8%.

Carbon Fiber 316

Carbon Fiber Carbon Renewable Conversion 316

CleanTechnica EVs

APRIL 21, 2024

Electric vehicles are good, but they can always be better. The two companies are mum on the details, but a quick look at Toray’s product lineup indicates that carbon fiber is. That’s the motivation behind the big news about Hyundai’s newly announced partnership with the advanced materials firm Toray Industries.

Hyundai 115

Hyundai Carbon Fiber Electric Vehicles Vehicles 115

Green Car Congress

MAY 4, 2022

Hankuk Carbon Co Ltd, a manufacturer of advanced composite materials, has formed a strategic joint-partnership with Dymag, a manufacturer of carbon composite wheels, to enable the mass production of high-performance carbon composite wheels for the world’s leading automotive OEMs.

Carbon 259

Carbon Manufacturer Carbon Fiber South Korea 259

Green Car Congress

APRIL 11, 2014

Danish start-up ECOmove has developed a technology which it says makes it possible to manufacture a carbon-fiber chassis without using special equipment. ECOmove calls its carbon-fiber technology Qstrung. The first unit has already been shipped to a company in Germany. —Mogens Løkke, CEO at ECOmove.

Carbon Fiber 225

Carbon Fiber Carbon Manufacturer 2009 225

Green Car Congress

JULY 28, 2023

Dymag, a designer and manufacturer of lightweight wheels for the automotive industry, and its strategic partner, composites material specialists Hankuk Carbon, are working with Hyundai on the development of advanced new carbon hybrid wheel technology for the carmaker’s N Performance products.

Carbon 195

Carbon Hyundai Hybrid Carbon Fiber 195

Green Car Congress

OCTOBER 13, 2016

PD Glasseiden, a Germany-based producer of fiberglass; European Carbon Fiber GmbH; and the ForschungsCampus Open Hybrid LabFactory e.V., In the first step at a location in Chemnitz, Saxony, CarboSax will build a pilot line for the sustainable production of carbon fibers.

Carbon Fiber 150

Carbon Fiber Germany Carbon Production 150

Green Car Congress

MAY 20, 2022

Its hybrid electric and hydrogen powertrain aims to reduce downtime related to energy recharging while reducing the carbon footprint, including the battery. Renault Scénic Vision is zero emission in production and in use with a 75% smaller carbon footprint than a conventional battery electric vehicle.

Hydrogen 482

Hydrogen Carbon Concept Hybrid 482

Green Car Congress

DECEMBER 12, 2012

The BMW Group and Boeing signed a collaboration agreement to participate in joint research for carbon fiber recycling as well as share carbon fiber manufacturing process simulations and ideas for manufacturing automation. Both the BMW Group and Boeing are pioneering the use of carbon fiber in their products.

Carbon Fiber 225

Carbon Fiber BMW Carbon Washington 225

Green Car Congress

JUNE 21, 2016

Automobili Lamborghini celebrated the grand opening of its new Seattle-based carbon fiber research facility, the Advanced Composite Structures Laboratory (ACSL). Operating as an entity outside of the company's headquarters in Sant’Agata Bolognese, the ACSL is responsible for unlocking new potential in carbon fiber.

Carbon Fiber 150

Carbon Fiber Seattle Carbon Washington 150

Green Car Congress

APRIL 24, 2017

Mitsubishi Rayon (MRC) (which is now consolidated into Mitsubishi Chemical , along with Mitsubishi Plastis and the former Mitsubishi Chemical) recently announced that its carbon fiber sheet molding compound (SMC) has been adopted for the rear hatch frame of the new Toyota Prius PHV.

Carbon Fiber 150

Carbon Fiber Mitsubishi Prius Carbon 150

Green Car Congress

JULY 12, 2015

To source the new lightweight track-capable carbon fiber wheels that are standard on the new Shelby GT350R Mustang, Ford partnered with Australia-based Carbon Revolution. Carbon Revolution first began delivering composite wheels in 2004 for Formula SAE campaigns. Ford, however, wanted more of a mass-production solution.

Carbon Fiber 150

Carbon Fiber Carbon Shelby Ford 150

Teslarati

OCTOBER 3, 2022

After weeks of delays and three aborted launch attempts on September 11th, 12th, and 30th, the second carbon-fiber Alpha rocket lifted off from its Vandenberg Space Force Base (VSFB) SLC-2W launch pad at 12:01 am PDT (07:01 UTC) on October 1st. Alpha is the largest all-carbon-fiber rocket ever built. It stands 29.5

Carbon Fiber 99

Carbon Fiber Carbon Alaska Companies 99

Green Car Congress

DECEMBER 8, 2011

a leader in the carbon fiber and composites industry, will co-develop advanced carbon fiber composite technologies for potential high-volume use globally in GM cars, trucks and crossovers. For Teijin, the arrangement could lead to widening its portfolio beyond specialty and high-end automotive carbon fiber applications.

Carbon Fiber 249

Carbon Fiber Carbon GM Fuel Economy 249

Green Car Congress

APRIL 12, 2012

Ford Motor Company is partnering with Dow Automotive Systems, a business unit of The Dow Chemical Company, to research the use of advanced carbon fiber composites in high-volume vehicles. Reducing weight will benefit the efficiency of every Ford vehicle.

Carbon Fiber 247

Carbon Fiber Carbon Ford Vehicles 247

Green Car Congress

DECEMBER 5, 2012

Teijin Limited began operating a pilot plant for the fully integrated production of carbon fiber reinforced thermoplastic (CFRTP) components from carbon fiber on the premises of its Matsuyama Factory in Ehime Prefecture, Japan. billion) for carbon fiber composite products by around 2020. Earlier post.).

Carbon Fiber 218

Carbon Fiber Carbon Japan USA 218

Green Car Congress

AUGUST 16, 2014

(MRC) recently executed a share sales and purchase agreement by which it will acquire 51% of Wethje Holding GmbH , a German company engaged in manufacturing of carbon fiber reinforced plastics (CFRP) parts for automobile applications, from Wethje parent Cross Industries AG.

Carbon Fiber 210

Carbon Fiber Auto Industry Mitsubishi Carbon 210

Green Car Congress

APRIL 17, 2015

Ford and DowAksa signed a joint development agreement (JDA) formally to advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter. DowAksa is expanding on Aksa’s existing carbon fiber production assets.

Carbon Fiber 150

Carbon Fiber Carbon Ford Light 150

Green Car Congress

FEBRUARY 22, 2015

Driven by a faster-than-expected pace of technology development, carbon-fiber reinforced plastics (CFRPs) will be poised to gain widespread adoption for automotive lightweighting by 2025, according to a new report from Lux Research, “Scaling Up Carbon Fiber: Roadmap to Automotive Adoption.”. Earlier post.) Earlier post.)

Carbon Fiber 150

Carbon Fiber Carbon Automobile 2007 150

Green Car Congress

MARCH 13, 2017

During this technical collaboration, researchers at MSU and UDRI will identify cost-effective combinations of resins from Ashland, sizings from Michelman, and carbon fibers from Zoltek that can be used to fabricate prepregs that can be compression-molded into composite parts. —Bryan G. Dods, IACMI CEO.

Carbon Fiber 150

Carbon Fiber Carbon USA Tennessee 150

Green Car Congress

JANUARY 12, 2015

Ford and DowAksa are accelerating joint research to develop high-volume manufacturing techniques for automotive-grade carbon fiber, aiming to make vehicles lighter for greater fuel efficiency, performance and capability. —Patrick Blanchard, Ford supervisor, Composites Group.

Carbon Fiber 150

Carbon Fiber Carbon Parts Ford 150

Green Car Congress

JUNE 22, 2015

The ThyssenKrupp Carbon Components – Maxion Wheels team will work with OEMs to develop custom solutions to meet their specific needs. In addition, the ThyssenKrupp – Maxion Wheels team is working with the Volkswagen Group to test prototypes on a vehicle.

Carbon Fiber 150

Carbon Fiber Carbon Hybrid SUV 150

Green Car Congress

MAY 13, 2016

RMX Technologies and the Department of Energy’s Oak Ridge National Laboratory have signed an exclusive licensing agreement for a new technology that significantly reduces the time and energy needed in the production of carbon fiber. Oxidation is the most time-consuming phase of the multistep carbon fiber conversion process.

Carbon Fiber 150

Carbon Fiber Carbon Energy Production 150