Green Car Congress

AUGUST 23, 2022

Audi is putting a centralized server solution into test operation in cycle-dependent production; it says it is the first manufacturer to do so. These are the reasons why we install the servers near us. That’s also why we call the solution Edge Cloud: because it’s close to our shop floor environment. —Henning Löser.

Audi 418

Audi Production Installation Buy 418

Green Car Congress

JULY 1, 2023

By the end of the year, the technical infrastructure for the use of AI will be installed at three other Volkswagen Group locations. For example, the technical infrastructure for AI use is currently being installed at Audi Brussels. The AI was developed and tested beforehand at the Neckarsulm site.

Audi 195

Audi Installation Manufacturer Maintenance 195

Green Car Congress

JULY 2, 2021

We will also install about 200 electric charging spots a year for the development of personal electric transport. Replacing one diesel bus with an electric bus reduces CO 2 emissions into the environment by 60.7 Russia-based heavy-duty truck vehicle manufacturer KAMAZ has already opened a center to produce electric buses in Moscow.

Buy 505

Buy Russia Electric Electrical 505

Green Car Congress

JULY 21, 2023

By developing an efficient and cost-competitive technology, the IBIS project offers the opportunity to reduce vehicle weight and the cost of EV powertrain and vehicle manufacturing, while offering a large number of new features.

Batteries 279

Batteries Battery Energy Storage Lithium Ion 279

Green Car Congress

MARCH 12, 2023

As installed at DENSO Fukushima Toyota will accelerate its efforts to build a model for the local consumption of locally produced hydrogen, using electrolysis equipment to produce clean hydrogen and combust it in one of the plant's gas furnaces. Toyota has been using hydrogen for FCEVs, FC stationary generators, production at plants, etc.

Toyota 370

Toyota Hydrogen Thailand Installation 370

Green Car Congress

MAY 6, 2021

Stockton Unified School District collaborated with the Center for Transportation and the Environment (CTE), Schneider Electric, Sage Energy Consulting and The Mobility House to develop a comprehensive roadmap for achieving net-zero emissions.

Charging 397

Charging Maintenance Fleet Grid 397

Green Car Congress

NOVEMBER 25, 2022

The project seeks to develop and commercialize the next generation of domestically manufactured DC Fast Charging (DCFC) technology in support of the federal government’s clean energy and climate priorities. Earlier post.). —Ezana Mekonnen, Chief Technology Officer at Imagen.

Commercial 321

Commercial Charging Affordable Grant 321

Green Car Congress

JUNE 2, 2023

Medha Group specializes in the design and manufacture of products including traction converters, auxiliary power converters and on-board systems for applications on locomotives, trainsets, coaches, railroad stations and railyards.

Commercial 199

Commercial Market Li-ion Energy 199

Green Car Congress

APRIL 21, 2021

ELYSIS has selected the Alma smelter, operated by Rio Tinto in Saguenay-Lac-Saint-Jean, Québec, for the first installation and demonstration of its inert anode technology at a commercial size of 450 kiloamperes (kA)—a common capacity for modern, full-scale smelters. Earlier post.). Source: Alcoa. Earlier post.).

Commercial 396

Commercial Molten Salt France Carbon 396

Green Car Congress

AUGUST 16, 2017

Researchers from the Georgia Institute of Technology and Rutgers University have developed a three-layer system to verify that components produced using additive manufacturing have not been compromised. Malicious software installed in the printer or control computer could compromise the production process.

Manufacturer 150

Manufacturer Georgia Universal Installation 150

Green Car Congress

APRIL 19, 2023

Technologies such as pressurized alkaline or high-temperature electrolysis are already being installed in industrial environments. However, commercially available membranes lack sufficient stability in alkaline environments, which have limited the widespread adoption of AEM in electrolysis applications.

Environment 199

Environment Universal Cheap Polymer 199

Green Car Congress

FEBRUARY 25, 2022

The solution, which resembles a modern-day fueling station, was developed in late 2021, and then installed in only three days at Siemens’ R&D hub eMobility and North American Headquarters for Electric Products. The busway power distribution equipment is manufactured at Siemens’ 540-person manufacturing hub in Spartanburg, South Carolina.

South Carolina 243

South Carolina Charging Concept Fleet 243

Green Car Congress

FEBRUARY 1, 2021

It also features built-in liquid-cooling and thermal hazard protection enhancing its ability to work safely in a wide range of environments. The company’s 60 Ah cells and M2 modules are manufactured by Leclanché in Germany and Switzerland, respectively. The cells provide cycle-life of 8,000 cycles at 80% depth of discharge at 1C/1C.

Fully Electric 372

Fully Electric Energy Hybrid Batteries 372

Green Car Congress

AUGUST 5, 2022

The marine fuel cell system uses a double envelope enclosure that enables the system to be perfectly sealed in a saline environment. Alstom has injected some €6 million to boost production capacity at the Aix-en-Provence plant while reducing manufacturing costs. Alstom acquired HELION in April 2021.

Mariner 284

Mariner Fuel Hydrogen Maintenance 284

Green Car Congress

JUNE 7, 2020

Procured by India, manufactured in segments by Larsen & Toubro Ltd at its Hazira factory, the cryostat is assembled and welded on site under the supervision of the Indian Domestic Agency. The 1250-ton cyrostat base is positioned over the ITER tokamak pit for installation. This base is the heaviest lift of tokamak assembly.

Fusion 435

Fusion France India 2015 435

Green Car Congress

JULY 25, 2012

The US Environmental Protection Agency (EPA) has recognized eight Toyota manufacturing sites in North America for achieving a 10% reduction in energy intensity through its ENERGY STAR Challenge For Industry program. Earlier this year, Toyota Motor Engineering & Manufacturing North America, Inc.

EPA 225

EPA Toyota St. Louis Manufacturer 225

Green Car Congress

APRIL 12, 2017

General Motors earned a 2017 EPA ENERGY STAR Partner of the Year — Sustained Excellence award for continued leadership in protecting the environment through superior energy efficiency. In the US, GM reduced energy use at its manufacturing facilities by 10% on a per-vehicle basis in 2016 compared to the previous year.

GM 170

GM Energy EPA Manufacturer 170

Green Car Congress

MAY 17, 2020

The entire life cycle of the passenger cars is taken into account, including the manufacture of the vehicles and the environmentally relevant emissions from driving. Eutrophication of non-marine aquatic environments [kg N-eq.]. Eutrophication of non-marine aquatic environments [kg P-eq.]. Sample results from Carculator.

Mariner 435

Mariner Climate Change DC Cars 435

Green Car Congress

JUNE 5, 2020

announced the development of a hydrogen fuel cell system for maritime applications based on fuel cell technology for automobiles, as part of efforts to offer environment-friendly powertrain solutions. Yanmar Holdings Co., and its subsidiary Yanmar Power Technology Co.,

Hydrogen 365

Hydrogen Fuel Automobile Manufacturer Mariner 365

Green Car Congress

SEPTEMBER 3, 2023

In all, the customer has ordered several hundred thousand flaps, with three flaps installed per stack. Optimized in terms of weight and size, they fit into even the smallest installation spaces with bore diameters down to just 28 mm. These are series production parts; spare parts will be supplied later as needed.

Fuel 221

Fuel Hydrogen Exhaust Installation 221

Teslarati

JUNE 5, 2022

billion to add over 6,200 union jobs to its manufacturing plants in Michigan, Ohio, and Missouri. The legacy OEM also plans to invest another $1 billion in the next five years to improve the workplace environment in its factories based in the United States. Ford plans to invest $3.7 by the end of 2026. Besides the $3.7

Ford 114

Ford Manufacturer Missouri Ohio 114

Green Car Congress

JULY 17, 2023

They can process extensive production-related data with low latency and distribute it to the worker support systems, which indicate to employees which vehicle part to install. Audi is the first car manufacturer in cycle-dependent production to use a centralized server solution that redeploys computing power.

Audi 195

Audi Production Maintenance Industrial 195

Green Car Congress

MARCH 5, 2023

In the coming years, Honda will begin applying a next-generation stationary fuel cell system to Honda manufacturing facilities and data centers globally, thereby reducing the company’s greenhouse gas emissions. The Torrance fuel cell station also serves as a proof of concept for future commercialization of the power generation unit.

Honda 221

Honda Fuel Power Powered 221

Green Car Congress

NOVEMBER 5, 2020

V reaching 10% capacity increase in comparison to a standard G/NMC cell resulting in lower cost of installed battery pack (euros per kWh) for EV-applications. Both cell types are produced in a pouch format in the company’s Willstätt, Germany manufacturing facility. Stable cells cycled between 3.00 - 4.35

Energy 435

Energy Germany Lithium Ion Switzerland 435

Green Car Congress

MAY 17, 2022

With Cummins’ significant global manufacturing footprint, the company can quickly scale production. The industry needs multiple solutions to meet the needs of all on- and off-highway customers and all applications considering the variation in duty cycles and operating environments, the company said.

Hydrogen 397

Hydrogen Engine Long Beach Carbon 397

Electric Vehicles India

DECEMBER 28, 2021

Nitin Gadkari announced to manufacture flex-fuel vehicles & flex-fuel strong hybrid EVs . Shri Nitin Gadkari calls for the manufacturing of Flex Fuel Vehicles (FFV) and Flex Fuel Strong Hybrid Electric Vehicles (FFV-SHEV) complying with BS-6 Norms in a time-bound manner within a period of six months.

Fuel 77

Fuel Manufacturer Hybrid Vehicles 77

Green Car Congress

NOVEMBER 22, 2020

The design and manufacture of the cells modules, the BMS and its installation will be carried out by Williams Advanced Engineering, a subcontractor on the project. At the end of life, the materials used in the Li-S cells can be disposed of without damaging the environment.

Lithium Sulfur 221

Lithium Sulfur Monaco Energy Batteries 221

Baua Electric

MAY 23, 2024

gigawatt (GW) Coastal Virginia Offshore Wind (CVOW), which will be the US’s largest offshore wind farm, has installed its first monopile foundation. The Orion , DEME Group’s heavy lift vessel, installed the monopile foundation approximately 29 miles off the Virginia Beach coast. Photo: DEME/LinkedIn In a major milestone, the 2.6-gigawatt

Wind 52

Wind Virginia Mariner Solar 52

Green Car Congress

MAY 27, 2020

When a manufacturer certifies small off-road engines, it can set its emissions limit to meet the current regulation, or choose to demonstrate that they have met standards below those required by the current regulation. This will be used in conjunction with the Coachella Schools Flag Program.

Honda 305

Honda California Emissions Engine 305

Cars That Think

JANUARY 12, 2023

While that era of sooty foundries and mills is long past, manufacturing remains essential — and challenging. One promising way to meet modern industrial challenges is by using additive manufacturing (AM) processes, such as powder bed fusion and other emerging techniques. Adopting AM is not just about installing new equipment.

Manufacturer 68

Manufacturer Fusion United Kingdom Parts 68

Green Car Congress

MARCH 29, 2022

Blackstone, together with a German industry and research consortium, will take the validated laboratory results of the 3D-printed solid-state batteries to the stage of demonstration in a real environment within the next three years. The results of the development project will form the basis for the market-ready product.

Sodium 367

Sodium Commercial Batteries Battery 367

Green Car Congress

JULY 23, 2019

Stäubli Electrical Connectors, a leading manufacturer of electrical connector solutions, has signed an agreement with SSA Marine to provide automatic charging stations for 33 terminal tractors at the Port of Long Beach. This project will create the largest automated electric vehicle charging program of any port in the United States.

Mariner 257

Mariner Long Beach Electric Vehicles Charging 257

Green Car Congress

JUNE 9, 2022

billion commitment to boost its product portfolio, R&D, and manufacturing capabilities in the North American region. They can replicate every climatic environment in the world and scale between extreme settings well beyond what a typical customer would put a vehicle through. The first American-assembled Volkswagen EV, the ID.4

Engine 259

Engine Czech Republic Batteries Battery 259

Green Car Congress

APRIL 26, 2019

The creation of this joint venture with Houpu illustrates the willingness of the Chinese market players to contribute to decarbonize transportation, reduce urban pollution and preserve the environment. Air Liquide has designed and installed more than 120 stations around the world to date.

Hydrogen 247

Hydrogen China Chinese Gas-Electric 247

Green Car Congress

NOVEMBER 19, 2019

After having already successfully made aluminum coils in precision casting in recent years, it was an obvious goal for the department Foundry Technology and Lightweight Construction at the Fraunhofer Institute for Manufacturing Technology and Applied Materials IFAM also to produce the coils for series production in die casting. millimeters.

Wind 348

Wind Motor Motors Motoring 348

Green Car Congress

FEBRUARY 28, 2020

The MT-50e is designed to combine the reliability and durability of FCCC’s products with the efficiency and performance of a factory-installed, fully integrated electric power system. The production-ready MT50e chassis with Proterra battery system.

All-Electric 259

All-Electric Indianapolis Electric Electrical 259

Green Car Congress

JULY 26, 2021

ABB will acquire ASTI Mobile Robotics Group (ASTI), a leading global autonomous mobile robot (AMR) manufacturer with a broad portfolio across all major applications enabled by the company’s software suite. Since 2015, the company has enjoyed close to 30% growth on an annual basis and is targeting approximately $50 million in revenue in 2021.

Manufacturer 221

Manufacturer Fleet Industrial Industry 221