Green Car Congress

APRIL 14, 2020

a division of GCL Poly, in China to make the final modifications to the solar cells required to manufacture the Gen 1 hydrogen production panels to be used in demonstration pilot plants. The panel has a modular design that can be scaled up for a larger panel with the ability to change out individual cells.

Solar 379

Solar Hydrogen Manufacturer Renewable 379

Green Car Congress

JULY 10, 2021

Under this agreement Rolls-Royce and Cavendish Nuclear commit to working together to develop the roles that Cavendish Nuclear can perform in the design, licensing, manufacturing and delivery aspects of the Rolls-Royce factory-fabricated small modular nuclear power plant.

Manufacturer 305

Manufacturer Grid Clean Cleaning 305

Green Car Congress

JANUARY 12, 2021

Archer, a manufacturer of electric vertical takeoff and landing (eVTOL) aircraft, and Fiat Chrysler Automobiles (FCA) have entered into a definitive agreement to enable Archer to benefit from access to FCA’s low-cost supply chain, advanced composite material capabilities, and engineering and design experience.

Production 243

Production Chrysler Available Today Low Cost 243

Green Car Congress

MAY 25, 2023

The US Department of Energy (DOE) launched the Clean Fuels & Products Shot , a new initiative that aims to reduce greenhouse gas emissions (GHGs) from carbon-based fuels and products significantly. Biomass and waste conversion technologies designed to use green electricity and hydrogen to maximize carbon retention in products.

Clean 210

Clean Cleaning Fuel Production 210

Green Car Congress

FEBRUARY 16, 2023

This marks a first-of-its-kind manufacturing achievement and is an important step towards Sakuu’s planned commercial-scale production of next-generation SwiftPrint batteries, including solid-state batteries, from its Kavian platform in gigafactories worldwide, the company said.

Batteries 418

Batteries Battery Li-ion Lithium Ion 418

Green Car Congress

APRIL 26, 2023

The focus of the research project “MaSSiF – Material Innovations for Solid-State Sulfur-Silicon Batteries” is the design, construction and evaluation of lightweight and low-cost sulfur-based prototype cells with high storage capacities. Wacker Chemie AG supplies silicon and know-how for manufacturing anodes with this material.

Batteries 504

Batteries Battery Li-ion Lithium Ion 504

Green Car Congress

FEBRUARY 18, 2020

Airspace Experience Technologies ( ASX ), an aviation technology start-up, and Spirit AeroSystems, a global aircraft design and manufacturing company, have signed a memorandum of understanding and a definitive agreement to cooperate on creation of affordable, certified all-electric, vertical take-off and landing (eVTOL) aircraft.

Affordable 429

Affordable Production Low Cost Recharge 429

Green Car Congress

FEBRUARY 18, 2020

million) to five demonstration phase projects for low-carbon hydrogen production. The Dolphyn project showcases a floating semi-submersible design with an integrated wind turbine, PEM electrolysis and desalination facilities. This funding will enable the detailed design of a 2 MW prototype system. Contract value: £3.12

Hydrogen 386

Hydrogen Carbon Production Wind 386

Green Car Congress

JANUARY 29, 2021

UK-based Watt Electric Vehicle Company has designed a state-of-the-art platform enabling low-to-medium volume manufacturers of cars and commercial vehicles to go electric without the cost burden of investing in their own specific chassis technology. —Neil Yates, founder and owner of Watt Electric Vehicle Company.

Manufacturer 248

Manufacturer Electric Vehicles Vehicles Electric 248

Green Car Congress

FEBRUARY 18, 2019

YASA, a leading manufacturer of axial-flux electric motors and controllers, signed a long-term joint innovation agreement with a global automotive OEM. YASA’s innovative axial-flux electric motor and controller designs offer best-in-class power and torque densities and are suited to both hybrid and pure electric vehicle applications.

Motor 324

Motor Motors Motoring Manufacturer 324

Green Car Congress

JUNE 21, 2019

US Energy Secretary Rick Perry announced $89 million to support innovative, advanced manufacturing research and development projects ( DE-FOA-0001980 ). This Department of Energy (DOE) Funding Opportunity Announcement (FOA) tackles key priorities such as domestic manufacturing for energy storage. Thermal Process Intensification.

Manufacturer 207

Manufacturer Energy Storage Conversion Grid 207

Green Car Congress

DECEMBER 25, 2020

FREYR is targeting the development of more than 40 GWh of scalable, modular battery cell production capacity via a phased development approach utilizing deep partnership-based strategies, including in-licensing of next generation technologies. —Tom Jensen, the CEO of FREYR. FREYR will pay both upfront and running fees to 24M.

Li-ion 350

Li-ion Lithium Ion Batteries Battery 350

Green Car Congress

OCTOBER 20, 2022

billion to 21 projects to expand domestic manufacturing of batteries for electric vehicles (EVs) and the electrical grid and for materials and components currently imported from other countries. This US-owned and operated manufacturing plant in northern Alabama will be the first of its size in North America. Earlier post.) Of that, $1.6

Parts 459

Parts Batteries Battery Lithium Ion 459

Green Car Congress

DECEMBER 13, 2016

Velodyne LiDAR announced a new design for a solid-state LiDAR sensor that can deliver a subsystem cost of less than US$50 when sold in high-volume manufacturing scale. The design consolidates components and results in significant advances in sensor miniaturization, reliability, and cost reduction.

Low Cost 150

Low Cost Design Conversion 2017 150

Green Car Congress

JUNE 30, 2020

The current extension will allow the company to increase focus on its more efficient GEN 2 hydrogen production technology which is intended to reduce the cost of producing renewable hydrogen significantly. The University of Iowa has been a key and productive partner in the development of our GEN 1 panels.

Iowa 221

Iowa Universal Hydrogen Production 221

Green Car Congress

FEBRUARY 15, 2023

Umicore is starting the industrialization of its manganese-rich HLM (high lithium, manganese) cathode active materials (CAM) technology and is targeting commercial production and use in electric vehicles (EVs) in 2026.

Industrial 210

Industrial Industry Batteries Battery 210

Baua Electric

DECEMBER 10, 2023

Chinese semiconductor manufacturers have a significant impact on various aspects of the global business landscape. This dependence can be a vulnerability for businesses if there are disruptions in the supply chain, such as trade tensions, geopolitical issues, or natural disasters affecting production facilities.

Chinese 52

Chinese Manufacturer China Low Cost 52

Green Car Congress

JULY 5, 2014

A team at the University of Glasgow has demonstrated the production and operation of a PEM electrolyzer constructed from silver-coated 3D-printed components fabricated from polypropylene. The use of 3D printing allows construction of light-weight, low-cost electrolyzers and the rapid prototyping of flow field design.

Low Cost 261

Low Cost Light Water Hydrogen 261

Green Car Congress

NOVEMBER 17, 2022

Under the MOU, the two companies will partner to establish best practices for end-to-end development and the reliable commercial supply of premium electrodes for Sakuu’s additive manufactured (AM) solid-state battery technology. The mixture is then fed into a special equipment designed by LiCAP engineers.

Supplies 326

Supplies Batteries Battery Energy Storage 326

Green Car Congress

OCTOBER 27, 2022

The company will use the investment to continue scaling operations and increasing manufacturing capabilities as it ramps up production in the United States. Additionally, Ionblox will invest in the hiring and further expansion of the team, including manufacturing talent. —Yves Yemsi, chief operating officer of Lilium.

Energy 282

Energy Batteries Battery Power 282

Green Car Congress

APRIL 29, 2022

(MHI), have been contracted by Japan’s Agency for Natural Resources and Energy, part of the Ministry of Economy, Trade and Industry (METI), to conduct a Hydrogen Production Demonstration Project Utilizing Very High Temperature, and from this fiscal year initiated a program to produce hydrogen using a High Temperature Engineering Test Reactor (HTTR).

Hydrogen 195

Hydrogen Production Engine Gas 195

Green Car Congress

JANUARY 11, 2022

has entered into a confidential Letter of Intent (LOI) with a large industrial company to provide more than 40 MW of RuggedCell water electrolyzer capacity for hydrogen production. RuggedCell water electrolysis technology was designed from the start to offer important capabilities which were missing in the market.

Hydrogen 199

Hydrogen Supplies Production Water 199

Green Car Congress

SEPTEMBER 1, 2023

Eos Energy, a provider of safe, scalable, efficient, and sustainable zinc-powered long-duration stationary energy storage systems, announced Project AMAZE (American Made Zinc Energy), a $500-million planned expansion and a significant milestone to build 8 GWh of clean energy storage production capacity.

Energy Storage 195

Energy Storage Energy Legal Polymer 195

Green Car Congress

DECEMBER 18, 2020

However, regulations, market design and the costs of power and electrolyzer production are still major barriers to the uptake of green hydrogen, the IRENA report says. The production cost for green hydrogen is determined by the renewable electricity price, the investment cost of the electrolyzer and its operating hours.

Hydrogen 482

Hydrogen Renewable Low Cost Green 482

Green Car Congress

AUGUST 18, 2020

The US Department of Energy’s (DOE’s) Reducing EMbodied-Energy and Decreasing Emissions (REMADE) Manufacturing Institute announced approximately $35 million to support research and development (R&D) that will enable US manufacturers to increase the recovery, recycling, reuse, and remanufacturing of plastics, metals, electronic waste, and fibers.

Manufacturer 207

Manufacturer Iowa Waste Plugin 207

Green Car Congress

APRIL 28, 2014

Nexeon, a UK-based silicon anode company ( earlier post ), has completed the construction and commissioning of its process development and manufacturing facility at its headquarters in Oxfordshire. We now have the key engineering resources we need on-board, and eagerly look forward to sampling customers with products made in our new facility.

Manufacturer 231

Manufacturer Li-ion Companies Production 231

Green Car Congress

FEBRUARY 28, 2015

million in funding from Sustainable Development Technology Canada’s (SDTC) SD Tech Fund, through the ecoENERGY Innovation Initiative, to develop low-cost wheel motors for electric and hybrid vehicles. Since then, TM4 has designed three generations of wheel motors. TM4, a wholly owned subsidiary of Hydro-Québec, is receiving $3.7

Low Cost 150

Low Cost Motor Motors Motoring 150

Green Car Congress

MARCH 9, 2023

The demand for domestically produced and sustainably sourced battery metals has grown at a near insatiable rate over recent years, as the domestic manufacturing capacity of lithium-ion batteries has grown exponentially from less than 50 GWh/year to now more than 700 GWh/year of operational and announced capacity.

Lithium Ion 431

Lithium Ion Purchase Batteries Battery 431

Green Car Congress

MAY 4, 2023

The companies have initiated the partnership with a non-recurring engineering (NRE) agreement to develop low-carbon technology for the conversion of critical metals—first virgin and later recycled material—into battery-grade cathode active material (CAM) precursors, which are essential to 6K Energy’s advanced cathode manufacturing.

Li-ion 199

Li-ion Carbon Energy Batteries 199

Teslarati

JANUARY 25, 2024

During Tesla’s Q4 and FY 2023 earnings call, CEO Eon Musk stated that the company is “very far along” on its next-generation low-cost vehicle program. “This is a revolutionary manufacturing system… far more advanced than any other automotive manufacturing system in the world, like, by a significant margin. .

Production 122

Production North America Texas Austin 122

Green Car Congress

DECEMBER 16, 2019

An additional benefit is that our nickel-iron electrode can catalyse both the hydrogen and oxygen generation, so not only could we slash the production costs by using Earth-abundant elements, but also the costs of manufacturing one catalyst instead of two. —Prof Zhao. Iron and nickel are currently priced at $0.13

Water 243

Water Low Cost Australia Hydrogen 243

Green Car Congress

JANUARY 5, 2016

The learnings from the trial have already proven invaluable in selecting the operating strategy for the volume production system, which will be a second generation design, the partners said. Tier 2 suppliers across the UK and other parts of the EU have been nominated and the manufacture of production tooling is currently underway.

2016 150

2016 Low Cost Production Store 150

Green Car Congress

FEBRUARY 25, 2014

Obama also launched a competition for a new manufacturing innovation institute to build US strength in manufacturing advanced composites, the first of four new competitions to be launched this year. Lightweight And Modern Metals Manufacturing. performing metals and alloys by removing technological barriers to their manufacture.

Manufacturer 249

Manufacturer Obama Illinois Chicago 249

Green Car Congress

JUNE 15, 2023

IperionX Limited has agreed a Scope of Work (SoW) for the supply of titanium metal components for Ford Motor Company using IperionX’s 100% recycled, low-carbon titanium metal. This Ford SoW follows a detailed program of quality and strength testing of IperionX’s low-carbon, circular titanium metal.

Carbon 305

Carbon Ford Shelby Utah 305

Green Car Congress

JANUARY 15, 2020

Enevate, a developer of advanced silicon-dominant Li-ion battery technology capable of extreme fast charging for electric vehicles (EVs), announced its new fourth-generation technology optimized for high volume commercialization and manufacturing at gigafactory scale.

Li-ion 247

Li-ion Batteries Battery Production 247

Green Car Congress

MAY 13, 2015

Driveline engineering specialist Drive System Design (DSD) will introduce a new 48V e-drive systems concept for mild hybrid vehicles at the 9 th International CTI Symposium later this month. Consumers and manufacturers are seeking lower cost solutions for hybrid powertrains.

Low Cost 150

Low Cost Concept CO2 Hybrid 150

Green Car Congress

FEBRUARY 4, 2012

SPX Service Solutions, a business unit of SPX Corporation ( earlier post ), and Aker Wade Power Technologies, LLC, a designer and manufacturer of advanced fast charging systems ( earlier post ), signed a letter of intent jointly to develop a new family of practical electric vehicle (EV) fast chargers for the global vehicle market.

Low Cost 236

Low Cost North America DC Dealers 236