Green Car Congress

AUGUST 10, 2011

Ford Motor Company. This project will identify fuel properties that can be used to enable novel combustion strategies with low emissions of nitrogen oxides in an engine, and enhance existing models to capture the effect of additional key fuel properties on combustion. Ford Motor Company. Plasan Carbon Composites.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

NOVEMBER 17, 2016

Analysis suggests that cost parity between electric drive and internal combustion vehicles is possible under certain scenarios when battery pack costs fall below $125/kWh (useable energy). DOE is putting particular emphasis on meeting the cost target. Targeted cost is equal to or less than $5/lb. Earlier post.)

Carbon Fiber 150

Carbon Fiber Vehicles Nickel Lithium Low Cost 150

Green Car Congress

JANUARY 13, 2015

Local Motors is 3D printing and assembling a Strati—the first 3D-printed car—live from the show floor at the North American International Auto Show (NAIAS). The design was chosen in May 2014 from more than 200 submitted to Local Motors by the company’s online co-creation community after launching a call for entries.

Motor 150

Motor Motors Motoring Carbon Fiber 150

Green Car Congress

NOVEMBER 15, 2021

Subaru Corporation, Toyota Motor Corporation, Mazda Motor Corporation, and Yamaha Motor Co., Initiating consideration of the possibility of joint research for hydrogen engine development (Kawasaki Heavy Industries and Yamaha Motor). Going forward, they are planned to be joined by Honda Motor Co.,

Mazda 387

Mazda Hydrogen Toyota Transportation 387

Green Car Congress

JANUARY 9, 2015

IACMI is dedicated to overcoming these barriers by developing low-cost, high-production, energy-efficient manufacturing and recycling processes for composites applications. In the wind energy industry, advances in low-cost composite materials will help manufacturers build longer, lighter and stronger blades to create more energy.

Tennessee 150

Tennessee Universal Manufacturer Honda 150

Green Car Congress

OCTOBER 4, 2009

Toyota’s targeted cost reductions in fuel cell vehicles. In a news conference at the Japan National Press Club on Friday, Toyota Motor President Akio Toyoda said that the company plans to begin mass production of electric vehicles in the US in 2012, followed by US production of fuel cell vehicles in 2015. Source: Toyota.

2015 315

2015 Toyota Commercial Fuel 315

Green Car Congress

SEPTEMBER 25, 2011

are working to develop technology for producing carbon fiber at low cost. It is used in components around engines and control parts inside motors. Toray Industries Inc. and Teijin Ltd. will build a production line for polyphenylene sulfide (PPS), a high-function resin, at its Kashima plant in Ibaraki Prefecture.

Manufacturer 218

Manufacturer Carbon Fiber Vehicles Low Cost 218

Green Car Congress

SEPTEMBER 18, 2015

Sixteen projects are aimed at reducing the cost and improving the performance of key PEV components. General Motors. This project will develop a low cost, ultra-compact power module using innovative integrated-cooling to increase power density, improve performance, and reduce cost. Delphi Automotive Systems.

Fuel 150

Fuel Carbon Fiber Lithium Ion Vehicles 150

Green Car Congress

OCTOBER 30, 2022

This is a low-volume, high-value market where aircraft will rely on high-cost and cutting-edge technologies to reach new heights with regard to performance and safety. For example, IDTechEx expects that lithium-metal and solid-state batteries, axial flux motors, and carbon fiber materials will play an important role in eVTOL markets.

Market 150

Market Electric Vehicles Vehicles Cars 150

Green Car Congress

MARCH 23, 2012

DE-FOA-0000648 ) This funding will support the development of high-strength, lightweight carbon fiber composites and advanced steels and alloys that will help vehicle manufacturers improve the fuel economy of cars and trucks while maintaining and improving safety and performance.

Carbon Fiber 218

Carbon Fiber Vehicles Carbon Engine 218

Green Car Congress

DECEMBER 16, 2010

Electric motor efficiency targets within the FOA. The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles. Subtopics include: Low-Cost Development of Magnesium.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

FEBRUARY 1, 2013

Some specific goals for 2022 include: Cutting battery costs from their current $500/kWh to $125/kWh. Reducing the cost of electric drive systems from $30/kW to $8/kW. When these goals are met, the levelized cost of an all-electric vehicle with a 280-mile range will be comparable to that of an ICE vehicle of similar size.

Plug-in 247

Plug-in Zinc Air Li-ion 2012 247

Green Car Congress

SEPTEMBER 16, 2010

The awards range from $500,000 to $3 million and will provide small innovative companies with the staying power they need to develop the processes that are necessary to reduce the manufacturing costs for their products and enable manufacturing at scale. DOE Funding: $3,000,000. Strategic Polymer Sciences, Inc. DOE Funding: $1,000,000.

Fuel 210

Fuel Energy Carbon Fiber Polymer 210

Baua Electric

MARCH 12, 2024

Positioned as a premium commuter e-bike in the budget space, the new model marks equally new territory for the low-cost e-bike company turned premium space competitor. Lectric Ebikes’ entire MO has been to find highly-demanded niches in the US e-bike market and then roll out new models at a fraction of the cost of competitors.

Low Cost 52

Low Cost Auto Carbon Fiber Maintenance 52

Green Car Congress

AUGUST 16, 2016

One initiative, SuperTruck II ( earlier post ), will award $80 million to four projects to develop and to demonstrate cost-effective technologies that more than double the freight efficiency of Class 8 trucks. Accelerated Development and Deployment of Low‐Cost Automotive Mg Sheet Components (Area of Interest 3). General Motors.

Vehicles 150

Vehicles Plug-in Lithium Ion Universal 150

Green Car Congress

JULY 10, 2010

Specifically, low cost and energy-efficient processes are sought that can be demonstrated and validated under field conditions to meet needs of the nascent algal biomass industry. Improved Magnetic Materials for Motors. The trend for higher-temperature electric machines requires higher-temperature PMs. Wind Technologies.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

AUGUST 18, 2017

The drive unit’s high efficiency means low costs of ownership: Fuel costs compared with an equivalent gasoline engine are much lower, at around €4 (US $4.70) per 100 kilometers (62.1 The lower CO 2 emissions also mean owners pay less in motor vehicle tax. In gasoline mode, these figures are 5.6 kilogram (1.3

Audi 150

Audi Gas Available Standards 150

Baua Electric

MAY 16, 2024

My tour of Ride1Up’s factory took me straight onto the factory floor where parallel production lines were busy cranking out Ride1Up’s ultra-affordable $995 Portola folding e-bike on one side of the factory, and the company’s budget-priced $2,295 CF Racer1 carbon fiber road/gravel e-bike.

Low Cost 52

Low Cost Carbon Fiber Installation Cheap 52

Green Car Congress

DECEMBER 20, 2013

VTO supports a broad technology portfolio aimed at developing and deploying advanced highway transportation technologies to reduce petroleum consumption and greenhouse gas emissions, while meeting or exceeding vehicle performance and cost expectations. Some specific goals include: Cutting battery costs from their current $500/kWh to $125/kWh.

Vehicles 246

Vehicles Fuel Economy Carbon Fiber Plug-in 246

Green Car Congress

SEPTEMBER 4, 2013

Ford Motor Company. ?This General Motors. This project will demonstrate a robust, cost effective, and versatile technique to join die cast magnesium to dissimilar aluminum alloys and mild and high strength steels. In the last four years, the cost of a plug-in electric vehicle battery has come down by nearly 50%.

Lithium Ion 210

Lithium Ion Transportation Universal Fuel Economy 210

Green Car Congress

JUNE 12, 2012

The US Department of Energy (DOE) awarded more than $54 million—leveraging approximately an additional $17 million in cost share from the private sector—for 13 projects to advance transformational technologies and materials that can help manufacturers significantly increase the energy efficiency of their operations and reduce costs.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

FEBRUARY 15, 2022

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. Combined, the new materials and manufacturing methods are expected to improve torque density by 40-70% and reduce manufacturing costs.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

FEBRUARY 2, 2013

High Temperature DC Bus Capacitor Cost Reduction & Performance Improvements. Further, alloying or coating pathways towards low-cost, effective passive films, have not been sufficiently explored in a sound and scientific way. Carbon Fiber Polymer Composite. Breakthrough Techniques for Dissimilar Material Joining.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

JANUARY 9, 2018

Putting Carbon-Fiber Reinforced Plastic to the Test. General Motors will leverage unique capabilities available at PNNL to develop a predictive performance model of dissimilar metallic spot-welds for joining aluminum to steel. A Way to Low-Cost, Yet High-Performing Aluminum. A Model to Join Dissimilar Materials.

Carbon Fiber 150

Carbon Fiber Wisconsin General Motors Low Cost 150

Green Car Congress

APRIL 29, 2015

The papers provide technical details on the high performance fuel-cell (FC) stack; specific insights into FC separator, and stack manifold; the newly developed boost converter; and the new high-pressure hydrogen storage system with innovative carbon fiber windings. The Mirai FC system achieves a power density of 3.1 kW/L and 2.0

Congress 150

Congress Toyota Fuel Carbon Fiber 150

Green Car Congress

JANUARY 12, 2018

Industry partners will provide 20% to 50% cost-share, including the technical know-how and manufacturing data needed to tackle the project goals. Improving predictability of the HP-RTM process will accelerate the large scale introduction of carbon fiber composites to achieve lightweighting and thus reduce both fuel consumption and emissions.

Manufacturer 150

Manufacturer Carbon Fiber Waste Eaton 150

Green Car Congress

DECEMBER 20, 2015

VTO supports a broad technology portfolio aimed at developing and deploying advanced highway transportation technologies that reduce petroleum consumption and greenhouse gas emissions, while meeting or exceeding vehicle performance and cost expectations. Advances for the Production of Low Cost Electric Drive Vehicle Motors.

Li-ion 150

Li-ion Vehicles Low Cost Grid 150

Green Car Congress

JANUARY 4, 2020

Department of Energy (DOE) selected 16 projects to receive nearly $25 million in federal funding for cost-shared projects to advance natural gas infrastructure technology development. Low-Cost Retrofit Kit for Integral Reciprocating Compressors to Reduce Emissions and Enhance Efficiency.

Gas 186

Gas Gas-Electric Carbon Fiber West Virginia 186

Green Car Congress

AUGUST 14, 2014

The US Department of Energy (DOE) is awarding more than $55 million to 31 new projects to accelerate research and development of vehicle technologies that will improve fuel efficiency and reduce costs under a program-wide funding opportunity announced in January. (DE-FOA-0000991, Ford Motor Company. DE-FOA-0000991, earlier post.)

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

JULY 12, 2012

Topping the award list is Ford Motor Company, with a $5.5-million parts, leading to a more reliable, lighter, and cost effective. Ford Motor. Ford Motor Company will engineer a high-performance natural. Ford Motor Company will engineer a high-performance natural. while driving down cost. Earlier post.).

Gas 225

Gas Eaton Low Cost Vehicles 225

Green Car Congress

APRIL 10, 2012

Some specific improvements which are of interest, but are not limited to, include: new low-cost materials, improvements in manufacturing processes, speed or yield, improved cell/pack design minimizing inactive material, significant improvement in specific energy (Wh/kg) or energy density (Wh/L), and improved safety.

Hydrogen 210

Hydrogen Fuel Range Vehicles 210

Green Car Congress

AUGUST 27, 2020

The US Department of Energy announced $33 million in funding for 17 projects as part of the Advanced Research Projects Agency-Energy’s (ARPA-E) Aviation-class Synergistically Cooled Electric-motors with iNtegrated Drives (ASCEND) and Range Extenders for Electric Aviation with Low Carbon and High Efficiency (REEACH) programs.

Carbon 218

Carbon Hybrid Electric Electrical 218

Green Car Congress

APRIL 28, 2013

The EVE race car is powered by two 60 kW electric motors, one for each rear wheel. Besides wheels, brakes, damper unit, batteries and electric motors, EVE is equipped with numerous sensors. EVE’s compact design is built on a tubular steel space frame housed within a carbon fiber body.

Batteries 271

Batteries Battery Carbon Fiber Italy 271

Baua Electric

MARCH 6, 2024

It’s a throttle-enabled Class 2 folding electric bike with 20″ wheels, a max speed of 20 mph (32 km/h) and a motor rated for 300W continuous and 720W peak. Lectric XP LITE quick specs Motor: 300W (720W peak) geared rear hub motor Top speed: 32 km/h (20 mph) Range: Claimed up to 72 km (40 mi), but less on throttle only Battery: 48V 7.8

Price 52

Price Buy MPH Electric 52

Green Car Congress

JANUARY 21, 2016

Secretary Moniz also announced that two innovative projects at CALSTART and the National Association of Regional Councils will receive $3 million to develop systems that help companies combine their purchasing of advanced vehicles, components, and infrastructure to reduce incremental cost and achieve economies of scale.

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150

Green Car Congress

JANUARY 22, 2014

Area Of Interest (AOI) 1: Development of Low-Cost, High-Strength Automotive Aluminum Sheet. This AOI is to address two major technical gaps in the performance of automotive aluminum alloys: Low strength among cost competitive automotive sheet alloys such as 5xxx and 6xxx series.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Baua Electric

JANUARY 13, 2024

It’s a throttle-enabled Class 2 folding electric bike with 20″ wheels, a max speed of 20 mph (32 km/h) and a motor rated for 300W continuous and 720W peak. Lectric XP LITE quick specs Motor: 300W (720W peak) geared rear hub motor Top speed: 32 km/h (20 mph) Range: Claimed up to 72 km (40 mi), but less on throttle only Battery: 48V 7.8

Price 52

Price Buy MPH Electric 52