Green Car Congress
FEBRUARY 23, 2017
In the wake of a report by the German television station ZDF identifying widespread aftermarket manipulation of NO x emissions control technologies on trucks, the European Automobile Manufacturers’ Association (ACEA) is calling for government action to preclude such manipulation.
Green Car Congress
JULY 14, 2012
China-based and -focused CCID Consulting estimates that the China passenger vehicle market will need at least 1.802 million tons of aluminum sheets annually, assuming that aluminum replaces 15% of the steel used in automobile manufacturing by 2015.
Baua Electric
MAY 17, 2024
As per data from the Society of Indian Automobile Manufacturers (SIAM), the hatchback and sedan share of passenger vehicle sales has dropped to 37% by end-FY2024 (from 70% in FY2013), whereas that of utility vehicles has soared to 60% from 21% 12 years ago. litre, four-cylinder, K12C unit.
Green Car Congress
MAY 17, 2012
The study claims mechanical damage and suggests degraded engine performance, emissions and durability on conventional vehicles from the use of E15 or E20 fuel. Three main engine wear mechanisms are impacted by ethanol fuels: abrasive wear, adhesive wear and corrosion. We believe the study is significantly flawed. The CRC test.
Green Car Congress
SEPTEMBER 20, 2012
Two new reports—one on technology, the other on policy— released by the International Energy Agency (IEA) outline pathways to improve the fuel efficiency of combustion-engined road vehicles by 50% by the middle of the century, saving as much as four-fifths of current annual global oil consumption. Technology Roadmap.
Green Car Congress
JULY 1, 2009
While full electric powertrains (battery and fuel cell) will at some point become pervasive in light-duty vehicles, the dominance of the internal-combustion engine will remain unchallenged over the next twenty years, according to Robert Bosch GmbH executives at their annual International Automotive Press Briefing in Boxberg, Germany.
Green Car Congress
MAY 28, 2014
Their low cost and ability to start the engine at cold temperatures sets them apart in conventional and basic micro-hybrid vehicles, and as auxiliary batteries in all other automotive applications, according to the report. Overview of the three vehicle classes identified in the study, and their corresponding battery technologies.
Expert insights. Personalized for you.
207 
Let's personalize your content