Green Car Congress

AUGUST 26, 2016

The new DOE funding opportunity announcement ( DE-FOA-0001622 ) focuses on the second of these pathways which is focused on securing applications for projects that will develop CO 2 -utilization technologies that produce useful products at lower cost than currently available technologies, without generating additional greenhouse gas emissions.

Convert 150

Convert Production Coal CO2 150

Green Car Congress

AUGUST 10, 2011

This project will identify fuel properties that can be used to enable novel combustion strategies with low emissions of nitrogen oxides in an engine, and enhance existing models to capture the effect of additional key fuel properties on combustion. Plasan Carbon Composites. drop-in replacement fuels). Ford Motor Company. 1,497,531. .

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

JULY 12, 2013

l/100 km) highway or better; and to reduce the average CO 2 tailpipe emissions of its US fleet by 15%. Opel also estimates it will reduce the average carbon tailpipe emissions from its fleet by 27% by 2020. Manufacturing energy use and emissions. to reflect divested assets and current GHG protocol emission factors.

GM 275

GM MPG Manufacturer 2017 275

Green Car Congress

NOVEMBER 24, 2014

ADL will focus initially on the introduction of the low emission technology to bus fleets in London and Oxford but anticipates rapid deployment across the UK in the next few years. Instead, the flywheel is a very efficient, short duration energy accumulator, that can capture and re-deploy large cumulative amounts of energy with little waste.

International 244

International Hybrid Carbon Fiber Store 244

Green Car Congress

DECEMBER 30, 2022

To date, efforts have been invested in developing carbon fibers, carbon electrodes, porous carbon foam/scaffolds, and carbon nanosheets from asphaltenes. Consequently, research on the valorization of asphaltenes has sparked over the past few years. —Saadi et al.

Waste 492

Waste Manufacturer Carbon Fiber Polymer 492

Green Car Congress

JUNE 20, 2015

produced the 757’s green diesel from waste animal fats, inedible corn oil and used cooking oil to reduce lifecycle CO 2 emissions by up to 80% less than petroleum jet fuel. Boeing’s Green Diesel concept, in three slides. Click to enlarge. Diamond Green Diesel in Norco, La.,

Diesel 150

Diesel Green Energy 2014 150

Green Car Congress

MARCH 7, 2017

With this deal, Audi is reducing the CO 2 emissions of the g-tron fleet when running on gas by 80%. CO 2 emissions are about 100 grams per km (160.9 The second layer, a composite winding of carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP), provides for maximum strength. lb per 62.1

Audi 186

Audi Gas Standards Gas-Electric 186

Green Car Congress

DECEMBER 20, 2013

VTO supports a broad technology portfolio aimed at developing and deploying advanced highway transportation technologies to reduce petroleum consumption and greenhouse gas emissions, while meeting or exceeding vehicle performance and cost expectations. Dual-fuel technologies. Early market commercialization opportunities.

Vehicles 246

Vehicles Fuel Economy Carbon Fiber Plug-in 246

Green Car Congress

DECEMBER 16, 2010

The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles. Development of Low-Cost Carbon Fiber. AOI 2: Lightweighting Materials. Subtopics include: Low-Cost Development of Magnesium.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

MARCH 1, 2013

CO 2 tailpipe emissions are less than 95 grams per km (153 g/mile) in gas mode. When the energy required to build the e-gas facility and wind power generators is included in a comprehensive analysis, CO 2 emissions under e-Gas operation are still less than 30 grams per km (48.28 The five-door car consumes on average less than 3.5

Audi 296

Audi Gas CO2 Gas-Electric 296

Green Car Congress

JANUARY 22, 2015

Area of Interest (AOI) 3: Body-in-White Joining of Carbon Fiber Composites to Lightweight Metals (Aluminum, Advanced High Strength Steel, or Magnesium) at Prototype Scale for High-Volume Manufacturing. Engines must be capable of meeting current emission standards and technologies developed must be demonstrated on an engine.

Fuel 150

Fuel Hydrogen Vehicles Carbon Fiber 150

Get Electric Vehicle

MAY 14, 2024

By leveraging AI, automotive companies can streamline their supply chains, reducing waste and ensuring timely delivery of parts. Furthermore, electric luxury cars often incorporate sustainable materials and manufacturing practices, further minimizing their carbon footprint.

Manufacturer 59

Manufacturer Vehicles Electric Electrical 59

Green Car Congress

JUNE 12, 2012

The top two awards, one of $9 million to a project led by Dow Chemical, and one of $8.999 million to a project led by PolyPlus, will fund projects tackling, respectively, the manufacturing of low-cost carbon fibers and the manufacturing of electrodes for ultra-high-energy-density lithium-sulfur, lithium-seawater and lithium-air batteries.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

JANUARY 12, 2018

will partner with ANL to increase efficiency and reduce emissions on optimizing heat transfer in diesel engines through simulations of piston and spray geometry in a project titled “Heavy-duty Diesel Engine Combustion Optimization for Reduced Emissions, Reduced Heat Transfer, and Improved Fuel Economy.” Vitro Flat Glass LLC.

Manufacturer 150

Manufacturer Carbon Fiber Waste Eaton 150

Green Car Congress

JUNE 21, 2016

Process intensification breakthroughs can dramatically shrink the footprint of equipment needed on a crowded factory floor or eliminate waste by using the raw input materials more efficiently. Reducing Embodied Energy and Decreasing Emissions (REMADE) in Materials Manufacturing Institute.

Manufacturer 150

Manufacturer Los Angeles Oregon Connecticut 150

Green Car Congress

FEBRUARY 15, 2022

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. A Zero-emission Process for Direct Reduction of Iron by Hydrogen Plasma in a Rotary Kiln Reactor - $1,200,000. Argonne National Laboratory.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

OCTOBER 10, 2018

kg/100 km, combined CO 2 emissions 0 g/km, combined electrical consumption 13.7 emissions: 0 g/km), the overall drive system of the GLC F-CELL offers around 40% more output. At cooler temperatures, the vehicle will make energy-efficient use of the waste heat from the fuel cell in order to optimise the energy balance of the vehicle.

Mercedes 314

Mercedes SUV Fuel PHEV 314

Green Car Congress

AUGUST 14, 2014

The largest single award ($10 million) goes to Delphi Automotive Systems to further the development of its Gasoline Direct-Injection Compression Ignition (GDCI) low-temperature combustion technology ( earlier post ) that provides high thermal efficiency with low NO x and PM emissions. developing beyond Li-ion battery technologies. 10,000,000.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

AUGUST 27, 2020

ASCEND projects work to develop innovative, lightweight, and ultra-efficient all-electric powertrain with advanced thermal management systems that help enable efficient net-zero carbon emissions for single-aisle passenger commercial aircraft. Compact Propulsion Engine Optimized with Waste Heat Recovery (CO-POWER); $2,815,760.

Carbon 218

Carbon Hybrid Electric Electrical 218

Green Car Congress

DECEMBER 20, 2015

VTO supports a broad technology portfolio aimed at developing and deploying advanced highway transportation technologies that reduce petroleum consumption and greenhouse gas emissions, while meeting or exceeding vehicle performance and cost expectations. Emission Control Strategies for Advanced Combustion Engines.

Li-ion 150

Li-ion Vehicles Low Cost Grid 150

Green Car Congress

JULY 30, 2013

With its new architecture, use of carbon fiber reinforced plastic, and premium mobility service offerings, the “ i3 marks the beginning of a new mobility age ,” said Dr. Reithofer. The SGL carbon fiber plant at Moses Lake, Washington, uses 100% hydropower.

BMW 247

BMW New York London Production 247

Cars That Think

SEPTEMBER 3, 2022

The cars feature recyclable batteries and bodies made from linen and recycled carbon fiber from last year’s cars. Hankook tires use natural rubber and recycled fiber, and will be recycled after every race. Ultra-fast charging at 600 kW nearly doubles the most powerful public chargers for civilian drivers. gallons) of fuel. “We

Future 88

Future Auto Porsche Monaco 88

Green Car Congress

JANUARY 21, 2016

This AOI will help promote the use of PEVs to reduce dependence on petroleum and reduce greenhouse gas emissions. Carbon Fiber Polymer Composite. Area of Interest (AOI) 2: Grid Modernization for Electric Vehicles. Steel (Mild, HSLA, AHSS, or Boron automotive alloy). Magnesium (cast, sheet, or extrusion, any alloy).

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150

Green Car Congress

JULY 17, 2015

The alternative-fuel car evolved to reduce exhaust emissions and other problems derived from burning fossil fuels. Since it can operate on 100% biofuel, it is the means for achieving new goals recently set for reducing the use of fossil fuels and cutting the net emission of CO 2 to zero. by Professor Andrew Alfonso Frank.

PHEV 150

PHEV Plug-in Renewable Energy 150

Green Car Congress

NOVEMBER 17, 2015

This makes it possible for the waste heat from the electrical drive components to be made available to the interior of the Q7 e-tron quattro. An outer skin made from carbon fiber reinforced polymer (CFRP) encases the inner aluminum shell. CO 2 emissions are less than 100 grams per km (160.9 kilograms (1.3

Audi 150

Audi PHEV Diesel Fuel 150

Green Car Congress

JANUARY 4, 2022

Inspired by natural forms and in partnership with innovative start-ups, engineers used advanced digital tools to lower weight and reduce waste by removing excess material assisted by 3D printing. The lid is made from a unique, sustainable composite material derived from sugar-cane waste, reinforced with carbon fiber, as used in Formula 1.

Mercedes 273

Mercedes Range Cars Electric 273