Green Car Congress

JANUARY 12, 2015

Ford and DowAksa are accelerating joint research to develop high-volume manufacturing techniques for automotive-grade carbon fiber, aiming to make vehicles lighter for greater fuel efficiency, performance and capability. Ford and Dow Chemical began working together in 2012 to develop low-cost, high-volume carbon fiber composites.

Carbon Fiber 150

Carbon Fiber Carbon Parts Ford 150

Green Car Congress

JANUARY 20, 2022

Transform Materials breaks down methane and other similar light hydrocarbon gases without oxygen, recombining the resulting fragments into two high-value end products, acetylene and hydrogen. The patented microwave plasma reactor system generates these products from methane efficiently at very high rates of conversion and selectivity.

Hydrogen 259

Hydrogen Renewable Production Motor 259

Green Car Congress

AUGUST 21, 2015

A team led by Dr. Stuart Licht at The George Washington University in Washington, DC has developed a low-cost, high-yield and scalable process for the electrolytic conversion of atmospheric CO 2 dissolved in molten carbonates into carbon nanofibers (CNFs.)

Low Cost 150

Low Cost Carbon Li-ion Carbon Fiber 150

Green Car Congress

FEBRUARY 24, 2023

Because emergency services require high levels of availability and have an unpredictable demand, retail electric motorcycles are unlikely to present a cost-effective solution. A follow-up project to develop the prototype units is planned, ultimately leading to small series production.

Motorcycles 397

Motorcycles Fully Electric Concept Electric Motorcycles 397

Green Car Congress

JANUARY 24, 2020

This investment will support transformational research and development (R&D), innovative hydrogen concepts that will encourage market expansion and increase the scale of hydrogen production, storage, transport, and use.

Market 207

Market Carbon Fiber Hydrogen Energy Storage 207

Green Car Congress

DECEMBER 17, 2019

The initial H2@Scale FOA, released by EERE in FY19, focused on enabling R&D for hydrogen production, transport, and storage, as well as first-of-kind pilot demonstrations of integrated systems with on-site nuclear power and multiple renewable energy sources. Advanced Carbon Fiber for Compressed Hydrogen and Natural Gas Storage Tanks.

Market 195

Market Carbon Fiber Hydrogen Mariner 195

Green Car Congress

NOVEMBER 18, 2009

Specifically, the funding will go toward reducing the production cost of carbon fiber manufacturing, to help in reducing the weight of vehicles; improved efficiency and lower costs for car batteries; and net-zero energy building technologies. ORNL will also receive $20.2

Carbon Fiber 199

Carbon Fiber Carbon Building Manufacturer 199

Green Car Congress

JUNE 9, 2017

million for 30 new projects aimed at discovery and development of novel, low-cost materials necessary for hydrogen production and storage and for fuel cells onboard light-duty vehicles. Precursor Development for Low-Cost, High-Strength Carbon Fiber. Advanced Water Splitting Materials. 249,898.

Hydrogen 170

Hydrogen Carbon Fiber Fuel Low Cost 170

Green Car Congress

DECEMBER 11, 2018

The team projects that reasonable estimates for production costs and loss of performance due to system implementation result in total energy storage costs roughly 5 times cheaper than those for 700 bar tanks, potentially opening doors for increased adoption of hydrogen as an energy vector. Antonelli et al.

Hydrogen 276

Hydrogen Energy Storage Carbon Fiber Store 276

Green Car Congress

MAY 20, 2014

Materia of Pasadena, California will receive $2 million to reduce the cost of compressed hydrogen storage systems. The project will demonstrate a novel resin system that reduces the use of expensive carbon fiber composites for high pressure storage tanks. PPG Industries of Greensboro, North Carolina will receive $1.2

Hydrogen 230

Hydrogen Carbon Fiber San Francisco North Carolina 230

Green Car Congress

MAY 14, 2013

DOE’s Fuel Cell Technologies (FCT) Office would like feedback on the “ 2013 Hydrogen Compression, Storage, and Dispensing Cost Reduction Workshop Final Report ”, with specific interest in which of the topics identified in the report are the most relevant to cost reduction at the hydrogen refueling station (forecourt).

Cost Of 199

Cost Of Hydrogen Carbon Fiber Low Cost 199

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.)

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

OCTOBER 24, 2016

This consortium will utilize the expertise and capabilities of the national laboratories to accelerate the development of commercially viable pathways for hydrogen production from renewable energy sources. Earlier post.) By establishing HydroGEN, the DOE intends to accelerate innovation with the assistance of the national laboratories.

Water 150

Water Hydrogen Production Green 150

Green Car Congress

OCTOBER 31, 2013

Developing systems to enable lightweight, compact, and cost competitive hydrogen storage will help make hydrogen fuel cell systems competitive in a wide range of portable and stationary applications, and enable longer driving ranges for a wider variety of transportation applications. develop novel, advanced hydrogen storage technologies.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

MARCH 31, 2014

By the end of Phase II, Mainstream plans to demonstrate a production-ready prototype that exceeds DOE targets for fuel economy, operating range, and cost. Low-Cost, High-Energy Si/Graphene Anodes for Li-Ion Batteries. Composite Coatings for Low-Cost Motor Windings in Electric Vehicles. Nextech Materials.

Exhaust 261

Exhaust Wind 2014 Motor 261

Green Car Congress

MAY 19, 2014

A new review article in the journal Science highlights emerging opportunities to increase the transformation of lignin to value-added products—i.e., Each product stream, however, has its own distinct challenges. lignin valorization. Simplified process flow diagram illustrating paths to recover lignin.

Production 225

Production Carbon Fiber Polymer Fuel 225

Green Car Congress

OCTOBER 6, 2016

The new funding opportunity (FOA) will provide funding to meet DOE’s Fuel Cell Technologies Office’s (FCTO’s) goals for Hydrogen Production and Delivery, Hydrogen Storage, Fuel Cell Technologies, Technology Validation, Manufacturing, and Analysis Programs. Source: “2015 Fuel Cell Technologies Market Report” Click to enlarge.

Industrial 253

Industrial Industry Fuel Carbon Fiber 253

Green Car Congress

NOVEMBER 18, 2016

The US Department of Energy (DOE) announced approximately $30 million in available funding ( DE-FOA-0001647 ), subject to appropriations, for research and development of low-cost hydrogen production, onboard hydrogen storage, and proton exchange membrane fuel cells to advance the widespread commercialization of fuel cell electric vehicles.

Hydrogen 150

Hydrogen Fuel Carbon Fiber Water 150

Green Car Congress

NOVEMBER 17, 2016

Analysis suggests that cost parity between electric drive and internal combustion vehicles is possible under certain scenarios when battery pack costs fall below $125/kWh (useable energy). DOE is putting particular emphasis on meeting the cost target. Targeted cost is equal to or less than $5/lb. Earlier post.)

Carbon Fiber 150

Carbon Fiber Vehicles Nickel Lithium Low Cost 150

Green Car Congress

AUGUST 10, 2011

This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

AUGUST 7, 2020

REPAIR teams will develop technology that enables gas utilities to update their distribution systems at low cost and continue to reliably service commercial and residential gas delivery needs nationwide. Natural gas is a crucial energy source for 75 million American households and businesses. —ARPA-E Director Lane Genatowski.

Gas 297

Gas Gas-Electric Universal Colorado 297

Green Car Congress

OCTOBER 4, 2009

Toyota’s targeted cost reductions in fuel cell vehicles. In a news conference at the Japan National Press Club on Friday, Toyota Motor President Akio Toyoda said that the company plans to begin mass production of electric vehicles in the US in 2012, followed by US production of fuel cell vehicles in 2015. Source: Toyota.

2015 315

2015 Toyota Commercial Fuel 315

Green Car Congress

JANUARY 9, 2015

IACMI is dedicated to overcoming these barriers by developing low-cost, high-production, energy-efficient manufacturing and recycling processes for composites applications. Thogus Products Company; Toray Composites (America), Inc.; Thogus Products Company; Toray Composites (America), Inc.; Honda R&D Americas, Inc.;

Tennessee 150

Tennessee Universal Manufacturer Honda 150

Green Car Congress

SEPTEMBER 25, 2011

are working to develop technology for producing carbon fiber at low cost. will build a production line for polyphenylene sulfide (PPS), a high-function resin, at its Kashima plant in Ibaraki Prefecture. The new production line will have an annual capacity of 5,500 tons and become fully operational in 2015.

Manufacturer 218

Manufacturer Carbon Fiber Vehicles Low Cost 218

Green Car Congress

JUNE 21, 2017

million for 30 projects working toward the discovery and development of innovative, low-cost materials needed for hydrogen production and storage and for automotive fuel cells ( earlier post ). The US Department of Energy is awarding roughly $15.8 —Shawn Litster.

Fuel 150

Fuel Carbon Fiber Low Cost Hydrogen 150

Green Car Congress

AUGUST 26, 2016

million in federal funding for cost-shared projects that will develop technologies that utilize CO 2 from coal-fired power plants to produce useful products. Another option is to use the CO 2 as a reagent to create useful products, such as cement, plastics, or liquid fuels. —DE-FOA-0001622.

Convert 150

Convert Production Coal CO2 150

Green Car Congress

OCTOBER 30, 2022

This is a low-volume, high-value market where aircraft will rely on high-cost and cutting-edge technologies to reach new heights with regard to performance and safety. For example, IDTechEx expects that lithium-metal and solid-state batteries, axial flux motors, and carbon fiber materials will play an important role in eVTOL markets.

Market 150

Market Electric Vehicles Vehicles Cars 150

Green Car Congress

SEPTEMBER 18, 2015

Sixteen projects are aimed at reducing the cost and improving the performance of key PEV components. This project will develop a low cost, ultra-compact power module using innovative integrated-cooling to increase power density, improve performance, and reduce cost. Delphi Automotive Systems. Area of Interest 3).

Fuel 150

Fuel Carbon Fiber Lithium Ion Vehicles 150

Green Car Congress

MAY 29, 2010

By manufacturing structural material that can serve multiple functions, fewer parts are needed for any given application, which means reduced cost, lighter weight and greater efficiency. NAHF-XTM inventor Khalid Lafdi, Group Leader for Carbon Materials at UDRI. Everybody is growing carbon nanotubes on substrates. Khalid Lafdi.

Carbon Fiber 170

Carbon Fiber Energy Production Ohio 170

Green Car Congress

NOVEMBER 15, 2021

The company is currently conducting verification tests for transporting large-quantity, low-cost hydrogen to Japan produced from Australian lignite. Yamaha Motor is developing hydrogen engine technology for possible use in its two-wheeled vehicles, ROV (four-wheeled recreational off-highway vehicle) series, and other products.

Mazda 387

Mazda Hydrogen Toyota Transportation 387

Green Car Congress

MARCH 24, 2016

Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated a production method they estimate will reduce the cost of carbon fiber as much as 50% and the energy used in its production by more than 60%. Details of the cost analysis will be shared with the prospective licensees.

Carbon Fiber 150

Carbon Fiber Carbon Manufacturer Energy 150

Green Car Congress

SEPTEMBER 16, 2010

These projects, funded as part of DOE’s Small Business Phase III Xlerator program, will help small businesses develop manufacturing processes to scale up production of their new, proven technologies. Overcoming cost and scale challenges is critical for small businesses to successfully bring their ideas to the marketplace, DOE notes.

Fuel 210

Fuel Energy Carbon Fiber Polymer 210

Baua Electric

MAY 16, 2024

If you cheap out, you get cheap products. But if you design a production system with triple and quadruple quality-assurance inspections, you get well-made products that treat their owners right for years to come. And yes, when it comes to carbon fiber road and gravel e-bikes, 2 g’s is crazy low-priced.

Low Cost 52

Low Cost Carbon Fiber Installation Cheap 52

Green Car Congress

AUGUST 18, 2017

The drive unit’s high efficiency means low costs of ownership: Fuel costs compared with an equivalent gasoline engine are much lower, at around €4 (US $4.70) per 100 kilometers (62.1 During its production, Audi e-gas binds exactly the amount of CO 2 emitted by the car. In gasoline mode, these figures are 5.6 Earlier post.)

Audi 150

Audi Gas Available Standards 150

Green Car Congress

DECEMBER 16, 2010

The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles. Subtopics include: Low-Cost Development of Magnesium. Development of Low-Cost Carbon Fiber.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

JANUARY 13, 2015

Made from a carbon fiber reinforced thermoplastic material by SABIC, the current model of the Strati takes approximately 44 hours to print 212 layers. Local Motors will showcase the proprietary three-phased manufacturing process for 3D-printing cars during NAIAS 2015. The first phase in 3D-printed manufacturing is additive.

Motor 150

Motor Motors Motoring Carbon Fiber 150

Green Car Congress

AUGUST 16, 2016

One initiative, SuperTruck II ( earlier post ), will award $80 million to four projects to develop and to demonstrate cost-effective technologies that more than double the freight efficiency of Class 8 trucks. Accelerated Development and Deployment of Low‐Cost Automotive Mg Sheet Components (Area of Interest 3). Description.

Vehicles 150

Vehicles Plug-in Lithium Ion Universal 150