Green Car Congress

MARCH 9, 2011

Teijin Limited has achieved a significant reduction in the cycle time required for molding carbon fiber reinforced plastic (CFRP) automobile cabin frame, bringing it to less than one minute. Long-fiber thermoplastic pellet: high-strength pellet made from carbon fiber, suited for injection molding of complex parts.

Carbon Fiber 199

Carbon Fiber Carbon Automobile Concept 199

Green Car Congress

SEPTEMBER 7, 2021

At IAA Mobility 2021 in Munich, Porsche is presenting the Mission R concept electric car that combines advanced technologies and sustainable materials, such as natural fibre-reinforced plastics, with a passion for racing. The Mission R is pre-equipped for over-the-air technology. High-end battery and 900-volt technology.

Porsche 417

Porsche Concept Cars Electric 417

Green Car Congress

NOVEMBER 30, 2011

Teijin Limited will establish the first pilot plant for fully integrated production of carbon fiber reinforced thermoplastic (CFRTP) components from carbon fiber on the premises of its Matsuyama Factory in Ehime Prefecture, Japan.

Carbon Fiber 199

Carbon Fiber Carbon Production Automobile 199

Green Car Congress

FEBRUARY 24, 2023

MAHLE Powertrain is working with White Motorcycle Concepts (WMC) to develop a fully electric three-wheeled motorcycle suited to the requirements of police, emergency first responders and last-mile delivery fleets. WMC 250EV bike in testing at MIRA, with the V-Duct visible.

Motorcycles 397

Motorcycles Fully Electric Concept Electric Motorcycles 397

Green Car Congress

AUGUST 19, 2023

Lamborghini unveiled the Lanzador electric concept at Monterey Car Week—a vision of a future purely-electric fourth series production Lamborghini. The concept for the fourth model is not just a technical demonstrator but also a refined laboratory on wheels in terms of sustainable materials. Active Aerodynamics.

Concept 370

Concept Electric Electrical Carbon 370

Green Car Congress

MAY 13, 2016

RMX Technologies and the Department of Energy’s Oak Ridge National Laboratory have signed an exclusive licensing agreement for a new technology that significantly reduces the time and energy needed in the production of carbon fiber. to 3 times, so we can process fiber in 25 to 35 minutes. Click to enlarge.

Carbon Fiber 150

Carbon Fiber Carbon Energy Production 150

Green Car Congress

OCTOBER 30, 2009

SGL Group and BMW Group have formed a 51:49 joint venture to manufacture carbon fibers and fabrics for the automotive industry. The joint venture will be operated through two companies, one based in North America (SGL Automotive Carbon Fibers LLC), and the other in Germany (SGL Automotive Fibers GmbH & Co KG).

Carbon Fiber 186

Carbon Fiber BMW Carbon Vehicles 186

Green Car Congress

OCTOBER 29, 2014

the core company of the Teijin Group’s carbon fibers and composites business, has developed a new technology—Tenax Part via Preform (PvP)—for highly efficient production of thermoset carbon fiber-reinforced plastic (CFRP). Toho Tenax Co., Expensive intermediate steps are not necessary.

Carbon Fiber 218

Carbon Fiber Production Carbon Waste 218

Green Car Congress

APRIL 13, 2010

Teijin Group materials and technologies used in the PU_PA EV. The Teijin Group recently unveiled a super-lightweight electric concept car made with proprietary materials and technologies including carbon fiber composites, polycarbonate resins and bio-derived polyester. Click to enlarge. Click to enlarge.

Concept 218

Concept Carbon Fiber Cars Automobile 218

Green Car Congress

JANUARY 14, 2013

presented the AERO-Y EV concept at the Tokyo Auto Salon 2013. The AERO-Y was designed for the research and development of Yokohama proprietary technologies. Prepreg is a sheeted material consisting of reinforced fiber impregnated with resin and the prepreg for CFRP uses carbon fiber as reinforced fiber.

2013 246

2013 Carbon Fiber Concept Auto 246

Green Car Congress

JUNE 4, 2014

Ford Lightweight Concept. Ford Motor Company unveiled its Lightweight Concept vehicle, which uses advanced materials to explore future weight-reduction solutions that could improve performance and fuel efficiency while reducing CO 2 emissions. 19” by 5” carbon fiber wheels. 19” by 5” carbon fiber wheels.

Carbon Fiber 225

Carbon Fiber Light Concept Ford 225

Green Car Congress

MAY 11, 2012

One of the highlights on the Audi stand at the 2012 Wörthersee Tour in Austria (an annual gathering of Audi VW, Seat and Skoda enthusiasts) is an electric bicycle technology concept: the Audi e-bike Wörthersee. The frame and the swinging arm that holds the back wheel are made of carbon fiber-reinforced polymer (CFRP).

Audi 361

Audi Concept Carbon Fiber Light 361

Green Car Congress

MARCH 8, 2016

Continental Structural Plastics (CSP) has signed a memorandum of understanding with Mitsubishi Rayon (MRC), regarding the development and manufacturing of innovative carbon fiber structural components for the automotive industry in North America. Also key was reducing the cycle time associated with the use of carbon fiber.

Carbon Fiber 150

Carbon Fiber Carbon Mitsubishi North America 150

Green Car Congress

MAY 19, 2015

Solvay is taking a “leadership role” in the development of the Polimotor 2 all-plastic automotive engine to be tested in a race car next year, demonstrating the company’s advanced specialty polymer technologies in light-weighting through metal replacement. Mustang engine, used a combination of carbon fiber, Torlon, epoxy, ceramic and metal.

Carbon Fiber 150

Carbon Fiber Polymer Carbon Engine 150

Green Car Congress

JANUARY 2, 2014

Audi Sport quattro laserlight concept. Audi will present the Audi Sport quattro laserlight plug-in hybrid concept at the Consumer Electronics Show (CES) from 6 to 10 January in Las Vegas. The coupe represents a new evolutionary stage of the Sport quattro concept ( earlier post ). Click to enlarge. l/100 km (94.09

Audi 310

Audi Plug-in Concept MPG 310

Green Car Congress

JUNE 12, 2011

Audi is presenting the Audi e-tron Spyder concept plug-in diesel hybrid car ( earlier post ) against the backdrop of “Le Mans vers le futur,” an event held in Le Mans as a venue for manufacturers to showcase innovative drivetrain technologies. The concept car accelerates from zero to 100 km/h (62 mph in 4.4 Click to enlarge.

Audi 329

Audi Plug-in Hybrid Concept 329

Green Car Congress

MARCH 31, 2011

Chevrolet introduced the Mi-ray concept at the 2011 Seoul Motor Show. The Mi-ray, developed at the GM Advanced Design Studio in Seoul, combines hybrid propulsion technology and advanced styling. The Mi-Ray concept. The Mi-ray features a concept “mid-electric” propulsion system, located primarily behind and beneath the driver.

Chevrolet 186

Chevrolet Carbon Fiber Concept Hybrid 186

Green Car Congress

SEPTEMBER 30, 2010

Jaguar has unveiled the C-X75 concept, an extended range electric vehicle that uses twin gas micro-turbines from Bladon Jets to power two switched reluctance generators from SR Drives. Battery technology is currently the greatest limiting factor in the development of high-performance electric vehicles with a realistic range.

Extended Range 371

Extended Range Gas-Electric Gas Electric Vehicles 371

Green Car Congress

APRIL 23, 2012

The A6 L e-tron PHEV concept. Audi is presenting the Audi A6 L e-tron concept at Auto China 2012 in Beijing. Audi says that with its first e-tron technology study in the luxury class, it is showing what a locally produced New Energy Vehicle from Audi might look like. The Audi A6 L e-tron concept delivers sporty performance.

Audi 253

Audi PHEV Concept China 253

Green Car Congress

MARCH 19, 2011

The US Department of Energy’s (DOE) Fuel Cell Technologies (FCT) Program will award up to $12 million to advance hydrogen storage technologies. 350 to 700 bar) storage vessels are constructed using expensive high-strength carbon fiber, such as Toray T700S, in a composite matrix as an overwrap to contain the stress.

Hydrogen 210

Hydrogen Carbon Fiber Low Cost Carbon 210

Green Car Congress

MARCH 24, 2010

Group (SAIC) unveiled three models of a concept new vehicle form called EN-V, short for Electric Networked-Vehicle. The concepts will be showcased from 1 May through 31 October at the SAIC-GM Pavilion at World Expo 2010 Shanghai. The Jiao EN-V model. Click to enlarge. GM and its strategic partner Shanghai Automotive Industry Corp.

GM 270

GM Concept Future Personal 270

Green Car Congress

DECEMBER 12, 2011

The US Department of Energy is awarding more than $7 million to fund four 3-year projects in California, Washington and Oregon to advance hydrogen storage technologies to be used in fuel-cell-electric vehicles. The project will focus on improving carbon fiber composite materials and the design and manufacture of hydrogen storage tanks.

Hydrogen 330

Hydrogen Carbon Fiber Oregon Alabama 330

Green Car Congress

OCTOBER 10, 2021

These conductivity-enhanced materials have the potential to lower the costs and impacts of adding renewables and electric cars to the grid, maximize next-generation energy storage technologies, and support electrification for energy-intensive sectors.

Manufacturer 320

Manufacturer Carbon Fiber Carbon Affordable 320

Green Car Congress

OCTOBER 27, 2014

Graphene 3D envisions printing batteries on demand and in remote locations, using the technology to 3D print supercapacitors that can be recharged much faster than the conventional battery, or printing batteries that are incorporated in the body of car. Graphene 3D has three US patent applications pending for its technology.

Batteries 362

Batteries Battery Carbon Fiber San Diego 362

Green Car Congress

SEPTEMBER 11, 2011

Audi urban concept with support for wireless charging. Audi is introducing a 1+1 urban concept technology study for urban and metropolitan areas. The cabin of the Audi urban concept offers slightly offset seating for two; the roof slides back for entry, and the canopy can remain open in good weather. Click to enlarge.

Concept 210

Concept Audi Charging Carbon Fiber 210

Green Car Congress

NOVEMBER 27, 2021

The vehicle, entirely made of carbon-fiber, maintains the same lines and contained mass of the original 4L, yet presenting new dynamic capabilities. The rigidity has been completely revised to include new concepts such as thrust or lift, which required hours of calculations and tests.

Carbon Fiber 418

Carbon Fiber France Electric Electrical 418

Green Car Congress

JANUARY 22, 2014

million to projects to to accelerate research and development of new vehicle technologies. AOI 2: Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles. ($6M) Carbon Fiber Composite Targets. AOI 3: Beyond Lithium Ion Technologies. ($8M)

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Green Car Congress

SEPTEMBER 8, 2014

A team led by Local Motors is 3D-printing a full vehicle body over 44 hours during the International Manufacturing Technology Show 2014 and will follow it up with a first drive set to take place the morning of Saturday, 13 September. SABIC’s LNP STAT-KON carbon fiber-reinforced compound. The Strati is being 3D-printed at IMTS.

Motors 303

Motors Motor Motoring Carbon Fiber 303

Green Car Congress

SEPTEMBER 15, 2009

The Audi e-tron concept. a high-performance electric sports car featuring four drive motors—two each at the front and rear axles—making the concept car a true quattro. in) leaves plenty of room between the axles for people and technology. Lightweight construction was a top priority for the e-tron concept car. in) wide, 4.26

Audi 257

Audi Concept Cars Electric 257

Green Car Congress

OCTOBER 22, 2020

Teijin has joined the AZL Partner Network for Lightweight Production Technology , a cross-industry network for joint business development and technology development organized by service and engineering provider AZL Aachen GmbH and involving nine institutes and some 80 companies in the field of lightweight production. © AZL Aachen GmbH.

Czech Republic 221

Czech Republic Production Carbon Fiber Portugal 221

Green Car Congress

OCTOBER 17, 2013

A composite blend of carbon fibers and polymer resin is being developed that can store and charge more energy faster than conventional batteries can. The material combines carbon fibers and a polymer resin, creating a very advanced nanomaterial, and structural supercapacitors. Click to enlarge. Click to enlarge.

Energy Storage 368

Energy Storage Volvo Carbon Fiber Energy 368

Green Car Congress

AUGUST 18, 2021

Two years after unveiling the BMW i Hydrogen NEXT concept car, BMW will present the BMW iX5 Hydrogen at the IAA Mobility 2021 in Munich in September. Jürgen Guldner, head of BMW Group Hydrogen Fuel Cell Technology and Vehicle Projects. The BMW iX5 Hydrogen combines fuel cell technology with a fifth-generation BMW eDrive.

BMW 418

BMW Hydrogen Carbon Fiber Store 418

Green Car Congress

AUGUST 14, 2014

The US Department of Energy (DOE) is awarding more than $55 million to 31 new projects to accelerate research and development of vehicle technologies that will improve fuel efficiency and reduce costs under a program-wide funding opportunity announced in January. (DE-FOA-0000991, developing beyond Li-ion battery technologies.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

APRIL 28, 2010

has signed a Joint Development Agreement (JDA) with Daimler AG to develop automobile parts made of carbon fiber reinforced plastics (CFRP). Under the agreement, Toray is responsible for developing optimal CFRP materials, and handling design and molding processes; Daimler is responsible for developing joining technologies.

Automobile 210

Automobile Carbon Fiber Parts Mercedes 210

Green Car Congress

MARCH 29, 2018

Genesis unveiled its Essentia Concept at the New York International Auto Show. The all-electric, high-performance concept elevates and reimagines the “Athletic Elegance” design paradigm, while providing a vision of future Genesis product performance and technology. Essentia is the brand’s initial concept for a true GT car.

New York 170

New York Concept Carbon Fiber Batteries 170

Green Car Congress

JANUARY 31, 2013

consortium is developing a mobility concept for an efficient electric vehicle, making the design as light as possible while still delivering the best possible safety protection. The passenger compartment will be made of carbon-fiber-reinforced plastic (CFRP). A prototype vehicle on the track from the Visio.M Click to enlarge.

Light 246

Light Carbon Fiber Germany Carbon 246

Green Car Congress

JANUARY 12, 2010

Audi introduced a new electric sportscar concept at the North American International Auto Show, its second following the introduction of the initial e-tron at the 2009 Frankfurt Motor Show in September. Audi e-tron Concepts. The body structure is based on Audi Space Frame technology (ASF), with a hybrid design approach adopted.

Detroit 246

Detroit Audi Concept Electric 246