Green Car Congress

JANUARY 18, 2014

VTO is seeking projects that address the major challenges to developing and commercializing batteries for plug?in As described in multiple DOE reports, the main barriers to widespread PEV commercialization are the cost; performance and life; and abuse tolerance of high?energy Specifically: the current cost of high?energy

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

MARCH 26, 2013

The CEMI announcement was made at the ribbon cutting of the Department’s Carbon Fiber Technology Facility in Oak Ridge, Tennessee, a new advanced manufacturing facility to reduce the cost of carbon fiber. Earlier post.) University of Texas at Austin. Colorado School of Mines.

Manufacturer 246

Manufacturer Carbon Fiber Clean Cleaning 246

Green Car Congress

OCTOBER 31, 2013

The goal is to enable the widespread commercialization of hydrogen and fuel cell technologies and specifically to provide adequate hydrogen storage for onboard vehicle applications that meet the DOE hydrogen storage targets, as well as enabling early market applications such as materials handling equipment and portable power applications.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

MAY 5, 2020

Rachel Meidl, the fellow in energy and environment at the institute’s Center for Energy Studies, and Emily Yedinak, a doctoral candidate in materials science and nanoengineering at Rice, published a new brief, “ Measuring the True Cost of Sustainability: A Case Study in a Green Energy Approach. ”. MT), and carbon fiber (~0.1

Hydrogen 170

Hydrogen Carbon Production Carbon Fiber 170

Green Car Congress

NOVEMBER 18, 2016

The US Department of Energy (DOE) announced approximately $30 million in available funding ( DE-FOA-0001647 ), subject to appropriations, for research and development of low-cost hydrogen production, onboard hydrogen storage, and proton exchange membrane fuel cells to advance the widespread commercialization of fuel cell electric vehicles.

Hydrogen 150

Hydrogen Fuel Carbon Fiber Water 150

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.)

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

AUGUST 10, 2011

Light-weighting materials : Five projects awarded to accelerate commercial availability of lighter weight vehicles using advanced materials that dramatically reduce vehicle weight while maintaining the highest safety standards. Increased availability of low cost carbon fiber can enable vehicle weight reduction and improvement in fuel economy.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

AUGUST 31, 2016

A US Department of Energy (DOE) program designed to spur the use of high performance supercomputers to advance US manufacturing has funded 13 new industry projects for a total of $3.8 GM and EPRI. the prediction of weld residual stresses in the dissimilar welds of nuclear piping systems.

Manufacturer 150

Manufacturer EPRI Lithium Sulfur Carbon Fiber 150

Green Car Congress

OCTOBER 30, 2022

For example, IDTechEx expects that lithium-metal and solid-state batteries, axial flux motors, and carbon fiber materials will play an important role in eVTOL markets. The new regulations are driving interest in e-fuels, ammonia, and hydrogen as the industry scrambles to find multiple silver bullets.

Market 150

Market Electric Vehicles Vehicles Cars 150

Green Car Congress

MARCH 31, 2014

This project will provide capability for much improved heat management in electric vehicle motors through development of innovative winding wire insulations with superior thermal management characteristics, while meeting the high electrical and mechanical performance standards set by the automotive industry. Treadstone Technologies, Inc.

Exhaust 261

Exhaust Wind 2014 Motor 261

Green Car Congress

JUNE 8, 2016

The purpose of the RFI is to identify future strategic research and development pathways for the DOE to pursue with potential to meet future system cost targets. Currently, carbon fiber (CF) reinforced polymer (CFRP) composites are used to make COPVs. The conversion process of PAN precursor to CF is also energy intensive.

Hydrogen 150

Hydrogen Polymer Vehicles Carbon Fiber 150

Green Car Congress

AUGUST 26, 2016

DOE’s Office of Fossil Energy is seeking these projects as part of the Department’s Carbon Storage program, which has the goal of developing and advancing technologies to improve the effectiveness of carbon storage, reduce the cost of implementation, and be ready for widespread commercial deployment in the 2025–2035 timeframe.

Convert 150

Convert Production Coal CO2 150

Green Car Congress

MARCH 24, 2016

Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated a production method they estimate will reduce the cost of carbon fiber as much as 50% and the energy used in its production by more than 60%. Details of the cost analysis will be shared with the prospective licensees.

Carbon Fiber 150

Carbon Fiber Carbon Manufacturer Energy 150

Green Car Congress

AUGUST 7, 2020

REPAIR teams will develop technology that enables gas utilities to update their distribution systems at low cost and continue to reliably service commercial and residential gas delivery needs nationwide. This will lower the costs of rehabilitating pipelines. —ARPA-E Director Lane Genatowski.

Gas 297

Gas Gas-Electric Universal Colorado 297

Green Car Congress

JUNE 21, 2016

The winning coalition, headquartered in Los Angeles, California brings together a consortium of nearly 200 partners from across academia, industry, and non-profits to spur advances in smart sensors and digital process controls that can significantly improve the efficiency of US advanced manufacturing. Industry-proposed Institutes Competition.

Manufacturer 150

Manufacturer Los Angeles Oregon Connecticut 150

EV Match

MARCH 19, 2021

At EVmatch, we’re on a mission to build a clean energy future together with industry-aligned partners. BED offers an additional $500 per installed charger to help cover the installation costs of each station if the owner agrees to make it publicly available from 9am – 5pm. Green Mountain Power. Source: NeoCharge). Tesla Loco.

Re-Charge 97

Re-Charge San Francisco Sierra Vermont 97

Green Car Congress

JANUARY 22, 2015

Specific goals include the following: Cutting battery costs from their current $500/kWh to $125/kWh; Eliminating almost 30% of vehicle weight through lightweighting; and. Reducing the cost of electric drive systems from $30/kW to $8/kW. Area of Interest (AOI) 5: Advances in Electrode and Cell Fabrication Manufacturing.

Fuel 150

Fuel Hydrogen Vehicles Carbon Fiber 150

Green Car Congress

JULY 10, 2010

The purpose of this Phase III program is for the grantee to pursue commercial applications of work that derives from, extends, or logically concludes effort(s) performed under prior (Phase I/II) Small Business Innovation Research (SBIR) or Small Business Technology Transfer (STTR) funding agreements.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

JUNE 12, 2012

The top two awards, one of $9 million to a project led by Dow Chemical, and one of $8.999 million to a project led by PolyPlus, will fund projects tackling, respectively, the manufacturing of low-cost carbon fibers and the manufacturing of electrodes for ultra-high-energy-density lithium-sulfur, lithium-seawater and lithium-air batteries.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

FEBRUARY 2, 2013

When the final funding opportunity announcement is released following this public comment period, DOE will accept applications from industry, national laboratories, and university-led teams to address these challenges and enable technologies that drive innovation in vehicle design. Magnesium (AZ or AM series commercial alloy).

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

NOVEMBER 17, 2014

For the near-term, the focus is on improving performance and lowering the cost of high-pressure compressed hydrogen storage systems. Related to this, DOE seeks by 2020 to develop novel precursors and conversion processes capable of reducing the high-volume cost of high-strength carbon fiber by 25% from $13 per pound to ~$9 per pound.

Hydrogen 225

Hydrogen Carbon Fiber 2014 St. Louis 225

Green Car Congress

FEBRUARY 15, 2022

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. Pratt & Whitney will design a novel, high-efficiency hydrogen-power turbomachine for commercial aviation. Argonne National Laboratory.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

APRIL 10, 2012

In Phase II, devices suitable for near-commercial applications must be built and tested, and issues associated with manufacturing the units in large volumes at a competitive price must be addressed. Applicant also must demonstrate a reasonable context of commercial viability. L/100 km) for cars and more than 43 mpg (5.5

Hydrogen 210

Hydrogen Fuel Range Vehicles 210

Green Car Congress

JANUARY 22, 2014

This AOI is to address two major technical gaps in the performance of automotive aluminum alloys: Low strength among cost competitive automotive sheet alloys such as 5xxx and 6xxx series. High cost of high-strength aluminum alloys such as high performance 6xxx and 7xxx series. Carbon Fiber Composite Targets.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Green Car Congress

SEPTEMBER 19, 2017

Macroalgae can be utilized as a feedstock for domestic transportation fuels, chemicals and other commercial products without competing with food crops for land and water. Eucheuma is a commercially valuable species of “red” macroalgae that has been difficult to propagate in a cost-effective manner. Category II MARINER Projects.

Mariner 150

Mariner Production Energy Alaska 150

Green Car Congress

DECEMBER 18, 2009

Amprius currently makes silicon nanowires in a small-scale batch process using chemical vapor deposition (CVD), a process borrowed from the semiconductor industry. Mass consumer applications would require a far more efficient and low-cost manufacturing technique. A123Systems, Inc. Angstron Materials, LLC. Regents of UW System.

Manufacturer 186

Manufacturer Lithium Ion Li-ion Low Cost 186

Green Car Congress

JULY 17, 2015

Andrew Frank is a significant industry dignitary credited as being the “Inventor” (or “Father”) of the modern day Plug-in Hybrid Electric Vehicle. This is especially true in air, sea, and some ground transportation as well as in industrial processes. This industry can be greatly expanded and improved to absorb all fossil material.

PHEV 150

PHEV Plug-in Renewable Energy 150

Green Car Congress

JANUARY 21, 2016

This FOA contains a total of 11 Areas of Interest (AOIs) and focuses on advanced light-weighting; advanced battery development; low cost electric motor development; enabling technologies for high efficiency engines; and support for EV deployment and AFV workplace safety programs. Carbon Fiber Polymer Composite.

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150