article thumbnail

End of production for BMW i3; 250,000 units over 8 and a half years

Green Car Congress

The serial production of the BMW i3 has ended , some eight and a half years after it was launched. The BMW i3 (combined power consumption: 16.3 - 15.3 The BMW i3 (combined power consumption: 16.3 - 15.3 For the BMW Group Plant Leipzig, the farewell to the BMW i3 is linked to the start of a new chapter in electric mobility.

BMW 435
article thumbnail

200,000 BMW i3 EVs produced in Leipzig over nearly 7 years

Green Car Congress

At the BMW Group plant in Leipzig, the 200,000 th BMW i3 model rolled off the production line last week. The BMW i3s (combined power consumption: 14.6 – 14.0 kWh/100 km) with Fluid Black metallic paint finish and accents in BMW i Blue was produced for a customer from Saxony and will be delivered by the BMW branch in Leipzig.

BMW 418
article thumbnail

BMW and SGL to triple production capacity at Moses Lake carbon fiber plant with $200M expansion; world’s largest carbon fiber plant

Green Car Congress

A production line for carbon fiber takes the PAN precursor through two stages (stabilization/oxidation and carbonization) and then to winding. SGL and BMW made the announcement at the groundbreaking ceremony for the planned site expansion. 3,000 tons of carbon fiber. Source: SGLACF. Click to enlarge.

article thumbnail

BMW Group plants stepping up activities in balancing-power market to contribute to grid stability

Green Car Congress

The energy control stations at BMW Group Plants Dingolfing and Landshut are stepping up their activities in the balancing-power market in Germany. Together with other highly-flexible controllable systems in the BMW Group production network, they will contribute to the stability of the public grid outside of the plant. Source: neon.

Grid 191
article thumbnail

BMW Group begins series production of the BMW i3 electric car in Leipzig

Green Car Congress

The BMW Group has begun series production of the BMW i3 electric vehicle ( earlier post ) at its plant in Leipzig. The body structure of the BMW i3 consists entirely of lightweight and durable carbon-fibre-reinforced plastic (CFRP); this is the first time the material has been used in automotive volume production.

BMW 268
article thumbnail

CarboSax: new joint venture for more sustainable carbon fiber production forms in Germany

Green Car Congress

PD Glasseiden, a Germany-based producer of fiberglass; European Carbon Fiber GmbH; and the ForschungsCampus Open Hybrid LabFactory e.V., In the first step at a location in Chemnitz, Saxony, CarboSax will build a pilot line for the sustainable production of carbon fibers. Dr. Plath also previously worked for BMW i.

article thumbnail

BMW using Hexcel CFRP in 7 Series B-pillar

Green Car Congress

BMW is using Hexcel CFRP technology to save weight and to reinforce the metal shell of the B-pillar in the BMW 7 Series. Hexcel supplies BMW with preforms made of unidirectional carbon prepreg set in various orientations and combined with adhesive. The prepreg is made from Hexcel’s HexPly M77 resin system that cures in 1.5

BMW 150