Green Car Congress

FEBRUARY 12, 2018

These projects were selected under an Office of Energy Efficiency and Renewable Energy (EERE) Advanced Manufacturing Office funding opportunity, focused on advanced materials, advanced processes, and modeling and analysis tools for materials and manufacturing. Argonne National Laboratory. Idaho National Laboratory. 854,039.

Manufacturer 150

Manufacturer Waste Universal Dallas 150

Green Car Congress

APRIL 22, 2010

The new IPM design is intended for applications where high constant power speed range and minimum current requirements are paramount within hybrid motor applications. Integral Powertrain can also provide software and inverter hardware to support this range. FE Stress analysis. Controls simulation and inverter matching.

Motor 186

Motor Motors Motoring Hybrid 186

Green Car Congress

MAY 20, 2012

Simulation study finds Miller version of Scuderi engine can deliver twice the BMEP as naturally aspirated version, theoretically enabling 50% downsizing while maintaining performance. The Miller cycle—an approach to improving the thermal efficiency of a combustion engine—uses a higher expansion ratio than compression ratio (i.e.,

Downsizing 257

Downsizing Engine Fuel Power 257

Charged EVs

SEPTEMBER 22, 2022

It has also developed a platform that can simulate the real-world performance of different cells, and can evaluate the state of health of existing battery packs. Charged spoke with co-founder Michael Baumann about the many applications of his company’s battery analytics platform. Charged : Tell us about the origins of the company.

Insight 52

Insight Batteries Battery Re-Charge 52

Green Car Congress

FEBRUARY 2, 2013

When the final funding opportunity announcement is released following this public comment period, DOE will accept applications from industry, national laboratories, and university-led teams to address these challenges and enable technologies that drive innovation in vehicle design. Lubricant Formulations to Enhance Fuel Efficiency.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

SEPTEMBER 18, 2015

This project will utilize co-extrusion technology to fabricate and validate high-energy and high-power electrodes for electric vehicle applications./td>. Electric Drive Vehicular Battery Modeling for Commercially Available Software (Area of Interest 6). Analysis and Design Application Company. PPG Industries.

Fuel 150

Fuel Carbon Fiber Lithium Ion Vehicles 150

Green Car Congress

JANUARY 11, 2010

The new product incorporates 1400 bar common rail direct injection technology for its diesel variant or multipoint gas injection for CNG and LPG applications, using centrally mounted injectors for optimum combustion. Performance and emissions were optimized using Ricardo’s WAVE engine performance and gas dynamics simulation software.

Engine 186

Engine Market Diesel India 186

Get Electric Vehicle

FEBRUARY 16, 2022

You may do software simulation projects related to electric vehicles. Develop a complete electric vehicle simulation model in MATLAB. Simulation of the vehicle to a grid-connected system at a private charging station and finding how to flatten the load curve. Thank you so much for your feedback. Battery manufacturing etc.

IDEA 98

IDEA Electric Vehicles Vehicles Electric 98

Green Car Congress

OCTOBER 29, 2014

The battery system continues to use the Volt’s active thermal control system that maintains electric range over the Volt’s life. The whole twin torque path spread ratio requires a lot of software and a lot of optimization. Its use in the Voltec system is the first production application of the engine in North America, GM said.

Volt 341

Volt GM Motor Motors 341

Cars That Think

JANUARY 14, 2023

The Role of Simulation in Developing Accurate BMS. At Exicom’s R&D center in Gurugram, India, the technology team led by Dr. Parmender Singh has developed a BMS that can be used to precisely monitor and manage Li-ion batteries in applications across a broad voltage range (up to 1000 V). Exicom Tele-Systems Pvt.

Li-ion 69

Li-ion Batteries Battery India 69

Green Car Congress

NOVEMBER 19, 2012

The Motiv electric Powertrain Control System (ePCS) uses off-the-shelf batteries and motors, which can be mixed and matched to fit the size of the electric truck application. The city confirmed this analysis by placing a hybrid garbage truck into service. in the range of 1 to 20KWh, depending on application. state of charge.

Chicago 297

Chicago Power Powered San Francisco 297

Cars That Think

JULY 30, 2021

Engineers that design electronics face significant thermal management challenges, and the number of applications that require thermal management continues to grow. Cellphones, data centers, home electronics, telecommunication, and the electrical grid use electronic components that require thermal management.

Illinois 53

Illinois Georgia Ohio Engine 53

Cars That Think

JANUARY 25, 2023

To validate cable simulation results, international standards are used, but these standards have not been able to keep up with recent advancements in computational power and the simulation software’s growing capabilities. In recent years, FEM has made a giant leap when it comes to cable analysis.

Wind 74

Wind Power Powered Installation 74

Green Car Congress

OCTOBER 22, 2014

A new techno-economic analysis by researchers at Carnegie Mellon University (CMU) and MIT has found that economies of scale for manufacturing current Li-ion batteries for light-duty EV applications (in this case, prismatic pouch NMC333-G batteries and packs) are reached quickly at around 200-300 MWh annual production.

Li-ion 318

Li-ion MIT Manufacturer Batteries 318

Cars That Think

AUGUST 2, 2021

Drones, such as the DJI Mavic Enterprise Dual with a spotlight payload and thermal imaging, flew in the dark to determine the scope of the collapse and search for survivors. It offers a preliminary analysis of the lessons learned. acre affected area. Another challenge for CV/ML methods is the lack of access to training data.

Florida 104

Florida Miami Light Personal 104

Green Car Congress

AUGUST 16, 2012

Materials applied research as it pertains directly to improving multifunctional material properties for raw materials used in additive processes and for additive manufactured parts, such as thermal and/or electrical properties. Leveraging computational tools and techniques to realize innovative designs though additive manufacturing.

Obama 290

Obama Manufacturer Ohio West Virginia 290

Green Car Congress

APRIL 16, 2010

While homogeneous charge compression ignition (HCCI) engines can offer both high efficiency and low emissions (NO x and PM), commercial automotive application continues to face the challenge of a limited operating range. A study by Kulzer et al. Click to enlarge. Boosting strategies. Thermodynamic study. bar for P in = 325 kPa.

2010 199

2010 Congress Gasoline Engine 199

Green Car Congress

NOVEMBER 11, 2010

They are only conditionally suitable for transmission-integrated applications. The higher power density of permanently excited synchronous motors (PSM) allows a more compact and lighter design, depending on the application. While the thermal factor limits the power potential, short-term violations of the limit are permitted.

Audi 210

Audi Parts Motor Motors 210