Green Car Congress

APRIL 1, 2023

The American National Standards Institute (ANSI) released for public review and comment a draft of the Roadmap of Standards and Codes for Electric Vehicles at Scale developed by the Institute’s Electric Vehicles Standards Panel ( EVSP ). This includes recommending pre-standardization research and development (R&D) where needed.

Standards 360

Standards Grid DC Charging 360

Green Car Congress

JULY 7, 2023

In turn, CARB has agreed to work collaboratively with manufacturers to provide reasonable lead time to meet CARB’s requirements and before imposing new regulations and to support the development of necessary ZEV infrastructure. The terms of the Clean Truck Partnership include: CARB will align with EPA’s 2027 regulations for NO x emissions.

Emissions 305

Emissions Manufacturer Climate Engine 305

Green Car Congress

MAY 27, 2023

The US Department of Energy (DOE) announced partnering opportunities for industry to work with National Laboratories on manufacturing scale-up and associated verification and validation for flow batteries and solid-state lithium batteries. ( Solid-state battery research still needs to: 1) assess the state of technology (i.e.,

Manufacturer 186

Manufacturer Batteries Battery Energy Storage 186

Green Car Congress

JUNE 28, 2020

The BMW Group has officially opened its new Additive Manufacturing Campus. The new center brings together production of prototype and series parts under one roof, along with research into new 3D printing technologies, and associate training for the global rollout of toolless production. —Milan Nedeljkovi?,

BMW 468

BMW Manufacturer Parts Industrial 468

Green Car Congress

SEPTEMBER 9, 2020

A new analysis of commercial aircraft fuel efficiency from the International Council on Clean Transportation (ICCT) finds that the UN’s aircraft CO 2 standard lags current technology by more than a decade. Average margin to ICAO’s CO 2 standard for new aircraft, 1980 - 2019. However, manufacturers could do even better.

Standards 273

Standards CO2 2019 2015 273

Green Car Congress

JUNE 22, 2022

ArcelorMittal published a concept for a low-carbon emissions steel standard to help incentivize the decarbonization of steelmaking globally and support the creation of market demand for physical steel products which would be classified as lower, and ultimately near-zero, carbon emissions steel. Dual scoring system.

Standards 431

Standards Carbon Emissions Concept 431

Get Electric Vehicle

MAY 14, 2024

This is a guest post by Asha Anna Chris (email id: cadillac.marketing2024@gmail.com ) The fusion of cutting-edge technology with the timeless allure of luxury cars has ushered in a new era of driving experience. Let’s look at how different stages of the manufacturing process are being influenced by AI: a.

Manufacturer 59

Manufacturer Vehicles Electric Electrical 59

Green Car Congress

MARCH 13, 2022

This rule updates the occupant protection Federal Motor Vehicle Safety Standards to account for vehicles that do not have the traditional manual controls associated with a human driver because they are equipped with automated driving systems (ADS). With this rule, we ensure that manufacturers put safety first.

Standards 317

Standards Vehicles Personal Manufacturer 317

Green Car Congress

MAY 24, 2022

The BMW Group will open its Cell Manufacturing Competence Center (CCMC) in the fall. With the emmission control approval procedure now completed, the necessary conditions are in place for commissioning of near-standard production of lithium-ion battery cells at the competence center in Parsdorf, outside of Munich.

BMW 259

BMW Manufacturer Lithium Ion Batteries 259

Green Car Congress

APRIL 21, 2023

ZF has joined the Navigation Data Standard (NDS) Association. In this association, automotive manufacturers, suppliers, map providers, and developers of map-based applications and services are establishing a global standard for digital maps in Standard Definition (SD) and High Definition (HD) resolution formats.

Standards 199

Standards Industrial Industry Gas 199

Green Car Congress

JUNE 17, 2023

The American National Standards Institute (ANSI) announced the publication of the Roadmap of Standards and Codes for Electric Vehicles at Scale developed by the Institute’s Electric Vehicles Standards Panel (EVSP). A “gap” means no published standard, code, regulation, policy, etc.

Standards 150

Standards Electric Vehicles Vehicles Grid 150

Green Car Congress

DECEMBER 21, 2021

The Environmental Protection Agency (EPA) is finalizing the federal greenhouse gas (GHG) emissions standards for passenger cars and light trucks for Model Years (MY) 2023 through 2026. EPA is planning to initiate a separate rulemaking to establish multi-pollutant emission standards under the Clean Air Act for MY 2027 and later.

EPA 243

EPA Standards Gas Pollution 243

Green Car Congress

MAY 23, 2023

Sakuu Corporation launched its safer, high energy, high power density Li-Metal Cypress cell chemistry for licensing to battery manufacturers using roll-to-roll manufacturing technology. Manufacturers can now license this technology. Li-Metal cells have advantages that Sakuu has made attainable, scalable, and safe.

Manufacturer 199

Manufacturer Batteries Battery 2016 199

Green Car Congress

JANUARY 8, 2023

Light detection and ranging (lidar) technology provides a three-dimensional map of all objects around the vehicle regardless of external lighting conditions, and as such can be a key element in autonomous vehicle (AV) and advanced driver assistance systems (ADAS). Tesla being a notable holdout so far.)

Standards 284

Standards Range Florida Light 284

Electric Driver

NOVEMBER 13, 2023

The North American Charging Standard (NACS) has emerged as a leading solution, gaining support from major EV manufacturers.

Standards 81

Standards Manufacturer Charging Electric Vehicles 81

Green Car Congress

JANUARY 20, 2023

Aircraft manufacturers designing “More Electric Aircraft” (MEA) are looking to convert the flight control systems from hydraulic to electric to reduce weight and design complexities. To meet the needs for an integrated and configurable power solution for aviation applications, Microchip Technology Inc.

Power 459

Power Powered Hybrid Electric 459

Green Car Congress

DECEMBER 29, 2022

Researchers at Oak Ridge National Laboratory (ORNL) and Lawrence Livermore National Laboratory, with collaborators from Los Alamos National Laboratory, National Institute of Standards and Technology and the University of Tennessee, Knoxville, are advancing the Exascale Additive Manufacturing project ( ExaAM ). Turner et al.

Manufacturer 273

Manufacturer Tennessee Insight Parts 273

Teslarati

MARCH 7, 2024

The Biden-Harris Administration announced a Request for Information (RFI) to gather feedback on Federal standards for electric vehicle (EV) charging stations. The feedback is necessary now that most automakers announced the adoption of the North American Charging Standard (NACS) or J3400.

Standards 103

Standards Charging F-150 DC 103

Green Car Congress

AUGUST 15, 2023

As part of the global effort to reduce the use of fossil fuels and greenhouse gas emissions, regulators are developing energy efficiency standards for the billions of small, medium, and large electric motors used around the world. The SAKOR units can be used test from two to eight pole motors ranging from 10 watts to more than 3 megawatts.

Standards 195

Standards International Motor Motors 195

Green Car Congress

FEBRUARY 13, 2020

ZF Friedrichshafen AG is joining the Open Manufacturing Platform (OMP), which was announced in 2019 by the BMW Group and Microsoft. The aim of this initiative is to enable faster and more cost-effective innovations in the manufacturing industry. reference architecture, leveraging the industrial interoperability standard OPC UA.

Manufacturer 259

Manufacturer Industrial Industry Standards 259

Green Car Congress

APRIL 13, 2023

The US Environmental Protection Agency (EPA) announced two new proposed federal emissions standards spanning light-, medium- and heavy-duty vehicles for model year 2027 and beyond. Together, the proposals would reduce oil imports by approximately 20 billion barrels.

EPA 210

EPA Light Standards Emissions 210

Green Car Congress

MARCH 7, 2021

Haldor Topsoe will invest in a manufacturing facility producing highly efficient solid oxide electrolyzers (SOEC) with a total capacity of 500 megawatt per year with the option to expand to 5 gigawatt per year. 30% greater output—when compared to standard alkaline or PEM electrolyzers. —Hauch et al. Hauch et al.

Hydrogen 476

Hydrogen Green Manufacturer Saudi Arabia 476

Green Car Congress

MAY 26, 2022

Germany will invest up to €290 million to launch the Innovation and Technology Center for Hydrogen (Innovations- und Technologiezentrum für Wasserstoff, ITZ H 2 ), following the positive conclusion of a feasibility study (German only). The feasibility study for an innovation and technology center confirms the approach of the BMDV.

Hydrogen 448

Hydrogen Germany Standards Transportation 448

Green Car Congress

APRIL 17, 2023

XPENG unveiled its next-generation end-to-end integrated technology architecture SEPA2.0 XPENG’s in-house full-scenario ADAS solution will come as standard on all future XPENG models for the Chinese market. Front and Rear Integrated Aluminum Die Casting Technology. CIB (Cell Integrated Body) Technology. With SEPA2.0

Volt 259

Volt Charging North America Batteries 259

Green Car Congress

AUGUST 29, 2022

The KARNO generator emerged out of GE’s long-running R&D investments in metal additive manufacturing across multiple industries and in areas such as generator thermal and performance design. The technology uses heat to drive a sealed linear generator to produce electricity.

Fuel 435

Fuel Range Hydrogen Available Today 435

Green Car Congress

AUGUST 23, 2023

Freudenberg Sealing Technologies has developed thermal barriers that help to slow down thermal runaway in Li-ion batteries by increasing resistance to propagation. Customer-specific, three-dimensional geometries can be produced in a variety of high and low volume manufacturing processes, such as injection molding and continuous extrusion.

Batteries 195

Batteries Battery Li-ion Lithium Ion 195

Green Car Congress

MARCH 16, 2016

America Makes , the National Additive Manufacturing Innovation Institute, and the American National Standards Institute (ANSI) have launched the America Makes & ANSI Additive Manufacturing Standardization Collaborative ( AMSC ). It is driven by the National Center for Defense Manufacturing and Machining ( NCDMM ).

Standards 150

Standards America Manufacturer United States 150

Green Car Congress

JULY 8, 2022

It shows that we are bringing the leading-edge technology of the future to Germany! From Salzgitter, the company will manage international factory operations, the further development of cell technology, the vertical integration of the value chain and the supply of machinery and equipment to the factories. Standard factory.

Standards 259

Standards Global Batteries Battery 259

Green Car Congress

JUNE 1, 2022

TTTech Auto and ZettaScale Technology are partnering to provide advanced communication technologies for software-defined vehicles. The partnership includes an investment by TTTech Auto in ZettaScale Technology as part of TTTech Auto’s growth strategy after its funding round earlier this year.

Auto 313

Auto Vehicles Standards Environment 313

Green Car Congress

MAY 27, 2020

Southwest Research Institute engineers have developed the next generation of clean diesel engine technology to reduce hazardous nitrogen oxides (NO x ) and carbon dioxide emissions while minimizing fuel consumption. SwRI developed the technology for the California Air Resources Board (CARB). g/hp-hr NO x emissions).

Engine 545

Engine Emissions Diesel 2020 545

Green Car Congress

JULY 17, 2022

Vitesco Technologies is using green laser systems from its long-standing production engineering partner TRUMPF for copper welded joints for production of battery management electronics for the BMW Group. Vitesco Technologies is an early adopter in the serial use of this solution. Welding copper is a complex process.

Green 293

Green Energy BMW Standards 293

Green Car Congress

MAY 27, 2016

A public-private team led by the National Institute of Standards and Technology (NIST) has created a new international standard that can “map” the critically important environmental aspects of manufacturing processes, leading to significant improvements in sustainability while keeping a product’s life cycle low cost and efficient.

Standards 150

Standards Manufacturer International Seattle 150

Green Car Congress

APRIL 15, 2022

The funds will support Ohmium’s rapid growth plan to quadruple hydrogen manufacturing capacity from 500 MW annually to approximately two GW annually by the end of 2022. The company has research and development facilities in the United States and India; manufacturing operations are in India.

Manufacturer 225

Manufacturer Companies India Hydrogen 225

CN EV Post

MARCH 6, 2023

Standard Robots aims to use driverless, robotics and artificial intelligence technologies to create efficient and flexible logistics solutions to help manufacturing companies improve productivity. The post NIO Capital's portfolio firm Standard Robots closes new financing appeared first on CnEVPost.

Financing 132

Financing Standards Manufacturer Production 132

Green Car Congress

FEBRUARY 5, 2021

A European consortium consisting of 25 organizations in the hydrogen sector has formed to define, develop and test the first European standard for fuel-cell modules for heavy-duty applications. The modules will be tested by the test centers in the consortium upon key indicators to benchmark performance and safety.

Standards 295

Standards Fuel Hydrogen Volvo 295

Green Car Congress

MARCH 22, 2023

The patented technology increases the range of vehicles, achieves high torque density, is cost-efficient to manufacture and requires fewer natural resources; in turn, reducing environmental impact. With its patented and unique e-motor architecture, DeepDrive could set new standards for e-mobility.

BMW 259

BMW Motor Motors Motoring 259

Green Car Congress

APRIL 3, 2019

At Hannover Messe, Microsoft and the BMW Group announced a new community initiative to enable faster, more cost-effective innovation in the manufacturing sector. Manufacturing production and profitability can be hindered by complex, proprietary systems that create data silos and slow productivity.

BMW 306

BMW Manufacturer Industrial Industry 306