Green Car Congress

JANUARY 31, 2022

Ionomr Innovations, a developer of ion-exchange membranes and polymers for the hydrogen economy, closed a $15-million Series A funding round with lead investors Shell Ventures and Finindus, joined by Chevron Technology Ventures (CTV), NGIF Cleantech Ventures and Pallasite Ventures. —Hans Maenhout, Finindus, Investment Directo.

Polymer 150

Polymer Companies Chevron Hydrogen 150

Green Car Congress

JUNE 29, 2020

a low cost, raw materials that do not raise concerns in terms of supply bottlenecks (electrodes that do not include PGMs, stainless steel current collectors), a compact design, the adoption of feeds based on non-corrosive liquids (low concentration alkali or DI water), and differential pressure operation.

Hydrogen 433

Hydrogen Production Polymer Italy 433

Green Car Congress

AUGUST 18, 2020

The project is to develop a cost-effective and efficient smart structural coating deposition system and advanced high-end technology tools to inspect and rehabilitate gas distribution pipelines. The designed polymer composite coating materials provide structural strength and facile processability with smart functionalities.

Parts 186

Parts San Diego Carbon Fiber Polymer 186

Green Car Congress

JANUARY 20, 2017

The dissolution process generates hydrogen gas, which could be captured and used to help fuel the heating step. This technique could open the door for a range of synthesis opportunities to produce low-cost 1D nanomaterials in large quantities. The dissolved lithium can be recovered and reused. —Gleb Yushin.

Low Cost 150

Low Cost Georgia Li-ion Batteries 150

Green Car Congress

AUGUST 18, 2017

Audi’s two latest natural-gas alternatives in the midsize category—the new A4 Avant g-tron ( earlier post ) and the new A5 Sportback g-tron—are now available for order in Europe. kilograms of gas per 100 kilometers, with CO 2 emissions of 102 grams per kilometer (164.2 mi) on natural gas in the NEDC cycle.

Audi 150

Audi Gas Available Standards 150

Green Car Congress

JANUARY 24, 2020

Low-cost electric traction drive systems using no heavy rare earth materials. Improved efficiency of medium- and heavy-duty natural gas and propane (LPG) engines. Materials Technology (up to $15 million) Lightweight and high-performance fiber-reinforced polymer composites for vehicle applications.

Alternative Fuels 305

Alternative Fuels Vehicles Lithium Ion 2020 305

Green Car Congress

SEPTEMBER 7, 2016

In a new departure, the A5 Sportback is also available as a bivalent g-tron, which customers can run on either Audi e-gas ( earlier post ), natural gas or gasoline. The tanks for the gas fuel in the A5 Sportback g-tron are located beneath the rearward structure. lb) of gas per 100 kilometers (62.1 Audi e-gas.

Audi 150

Audi Gas Gasoline Available 150

Green Car Congress

MARCH 3, 2014

This is not, however, simply a case of reengineering the technology currently optimized for high-pressure conversion of syngas into methanol, because a low-pressure CO 2 reduction process may require a different catalyst. —Studt et al. We spent a lot of time studying methanol synthesis and the industrial process.

Low Cost 257

Low Cost Clean Cleaning Production 257

Green Car Congress

MAY 19, 2018

This proposal will not only help accelerate automotive fuel cells and stationary fuel cells, but will also provide a platform that could significantly influence many electrochemical processes reducing the costs for those processes as well. Gas Diffusion Layers. pH Matter, LLC: High Performance Gas Diffusion Layer.

Hydrogen 199

Hydrogen Fuel Low Cost Polymer 199

Green Car Congress

DECEMBER 2, 2018

a developer of low-cost, high-performance polymers for electrochemical applications, announced its selection by the US Department of Energy’s Advanced Research Projects Agency-Energy (ARPA-E) for an award that will support the continued development of its alkaline exchange ionomers and membranes. 3) Perfluorinated polymers (i.e.,

Polymer 261

Polymer Fuel New York Hydrogen 261

Green Car Congress

AUGUST 29, 2015

an integrated stationary fuel cell manufacturer, to develop a durable, low-cost, and high-performance electrochemical cell to convert natural gas and other methane-rich gas into methanol, a major chemical commodity with worldwide applications in the production of liquid fuels, solvents, resins, and polymers.

Convert 150

Convert North Dakota Gas Fuel 150

Green Car Congress

FEBRUARY 18, 2020

Gigastack will demonstrate the delivery of bulk, low-cost and zero-carbon hydrogen through ITM Power’s gigawatt-scale polymer-electrolyte membrane (PEM) electrolyzers, manufactured in the UK. The project aims to reduce the cost of electrolytic hydrogen significantly. Contract value: £7.48 million (US$9.7 million (US$3.6

Hydrogen 386

Hydrogen Carbon Production Wind 386

Green Car Congress

JANUARY 13, 2021

High-Throughput Manufacturing of Breakthrough Polymer Electrolyte to Enable Low-Cost Solid-State Batteries - $8,000,000. The team will drive toward a 15% reduction in production cost of IM’s PE powder and third-party qualification of ultrahigh capacity automotive Li-ion cells (250 ampere hour). Cambridge Electronics Inc.

Li-ion 199

Li-ion Batteries Battery Polymer 199

Green Car Congress

JUNE 26, 2020

The IDEALFUEL project aims to create sustainable alternatives by developing new efficient and low-cost methods to produce low-sulfur heavy fuel oils from wood-based non-food biomass. Although cleaner fuels are available, many companies opt for HFOs due to their low cost. NL); Winterthur Gas & Diesel Ltd. (CH);

Mariner 273

Mariner Oil Fuel Cleaner 273

Green Car Congress

JULY 17, 2020

AOI 02: Low Cost Electric Traction Drive Systems Using No Heavy Rare Earth Materials. Low Cost, High-Performance, Heavy Rare Earth-Free 3-In-1 Electric Drive Unit. Low-Cost Rare-Earth Free Electric Drivetrain Enabled by Novel Permanent Magnets, Inverter, Integrated Design and Advanced Thermal Management.

Lithium Ion 236

Lithium Ion Vehicles Li-ion Universal 236

Green Car Congress

NOVEMBER 16, 2018

In addition, Pinnacle will employ high rates of exhaust gas recirculation and a low temperature combustion strategy, which will improve knock tolerance and reduce heat loss, pumping work, and NO x emissions. Ecolectro is developing alkaline exchange ionomers (AEIs) to enable low-cost fuel cell and electrolyzer technologies.

Engine 247

Engine San Diego Polymer Lithium Ion 247

Green Car Congress

MAY 25, 2017

This proposal aims to solve these problems by converting organic waste into chemicals with widespread use in polymer and transportation industries. This project focuses on the development and US manufacturing of a new battery membrane that enables low-cost and long-lived Li-ion batteries. Trash2Cash-Energy LLC. Reaction 35, LLC.

Grant 150

Grant Li-ion Waste Lithium Sulfur 150

Green Car Congress

SEPTEMBER 3, 2020

Under this cost-shared research and development (R&D), DOE is awarding $51 million to nine new projects for coal and natural gas power and industrial sources. This work will focus on designing a carbon capture system capable of capturing 50 to 70 percent of CO 2 emissions from blast furnace gas. LH CO 2 MENT Colorado Project.

Carbon 236

Carbon Coal Gas-Electric Gas 236

Green Car Congress

DECEMBER 13, 2019

Low-cost electric traction drive systems using no heavy rare earth materials. The objective of this potential area of interest is to research, develop, and test a heavy rare earth mineral free advanced motor and inverter drive system that costs ?

2020 186

2020 Vehicles Polymer Gasoline-Electric 186

Green Car Congress

OCTOBER 15, 2019

Researchers at the Department of Energy’s SLAC National Accelerator Laboratory and Stanford University have shown for the first time that a low-cost, non-precious metal cobalt phosphide (CoP) catalyst catalyst can split water and generate hydrogen gas for hours on end in the harsh environment of a commercial device.

Hydrogen 218

Hydrogen Commercial Polymer Connecticut 218

Green Car Congress

OCTOBER 29, 2014

The purpose of the workshop was to share information and identify the RD&D needs to enable low-cost, effective delivery of hydrogen from centralized production facilities to the point of use (e.g., retail, light-duty vehicle stations and other applications). kg for forecourt (1,500 kg/day) and $2.00/kg Pre-commercial.

Hydrogen 218

Hydrogen Production Low Cost 2014 218

Green Car Congress

SEPTEMBER 28, 2015

By employing proprietary pretreatment and processing, researchers at Oak Ridge National Laboratory and Drexel University have produced flexible polymer carbon composite films from scrap tires for use as electrodes for supercapacitors. They then washed the rubber and put it into a tubular furnace under a flowing nitrogen gas atmosphere.

Polymer 150

Polymer Waste Carbon Low Cost 150

Green Car Congress

MARCH 23, 2016

Researchers at Oak Ridge National Laboratory (ORNL) have developed a new class of high-performance thermoplastic elastomers for cars and other consumer products by replacing the styrene in ABS (acrylonitrile, butadiene and styrene) with lignin, a brittle, rigid polymer that, with cellulose, forms the woody cell walls of plants.

Renewable 150

Renewable Polymer Carbon Fiber Commercial 150

Green Car Congress

OCTOBER 9, 2014

The following Stanford faculty members received funding for advanced research on photovoltaics, battery technologies and new catalysts for sustainable fuels: Self-healing polymers for high energy density lithium-ion batteries. The mineral perovskite is a promising, low-cost material for enhancing the efficiency of silicon solar cells.

Renewable 225

Renewable Solar Zinc Air Energy 225

Green Car Congress

SEPTEMBER 11, 2009

The Nitto Denko, Kobe University project is entitled “R&D into Polymer Membrane-integrated System for Distillation and Dehydration of Cellulosic Bioethanol”.

Universal 199

Universal Polymer Low Cost 2009 199

Green Car Congress

FEBRUARY 12, 2018

These low density steels are expected to generate energy savings by bringing efficiencies in the steel manufacturing and lifetime savings by use of lightweight steel in automotive structural applications. Argonne National Laboratory. Board of Trustees of the University of Illinois. Boston Electrometallurgical Corporation.

Manufacturer 150

Manufacturer Waste Universal Dallas 150

Green Car Congress

JANUARY 27, 2023

Made from widely available domestic feedstocks and advanced refining technologies, energy-dense biofuels provide a pathway for low-carbon fuels that can lower greenhouse gas emissions throughout the transportation sector and accelerate the bioeconomy. gallon with over 80% reduction in greenhouse gas emissions.

Production 225

Production Carbon Conversion Mariner 225

Green Car Congress

APRIL 4, 2019

Covetic/Printed Steel – There is a need for low-cost, high-efficiency steels to achieve low-cost and high power density electric motors. natural gas, propane, electricity, hydrogen) proof-of-concept demonstrations in new communities and fleets, and electric vehicle data collection.

Vehicles 252

Vehicles Fuel Economy Alternative Fuels Motor 252

Green Car Congress

SEPTEMBER 1, 2017

This would be the largest unit of its kind in Germany and the world’s largest PEM (Polymer Electrolyte Membrane) electrolyzer. The hydrogen is currently produced as a byproduct of the refining process or through natural gas reforming; electrolysis instead uses electricity to split water into the base components of hydrogen and oxygen.

Hydrogen 150

Hydrogen Installation Power Powered 150

Green Car Congress

SEPTEMBER 16, 2010

Materials Innovation Technologies will develop low cost carbon fiber composite manufacturing technology to address the need for cost-effective, high volume production, lighter-weight components for automobiles and other vehicles by designing, manufacturing and testing several target components. Strategic Polymer Sciences, Inc.

Fuel 210

Fuel Energy Carbon Fiber Polymer 210

Green Car Congress

OCTOBER 4, 2017

Hydrogen gas, a byproduct of the aromatization reaction, is used to remove unsaturated bonds in the aliphatic material. We believe Queensland offers huge potential for low-cost, biomass-based feedstocks to produce biofuels. A portion of this material is reacted separately to form high density aromatic compounds.

Australia 150

Australia Supplies Fuel Minnesota 150

Green Car Congress

JANUARY 18, 2014

burn and exhaust gas recirculation (EGR)?diluted Further, lightweight materials projects are sought that emphasize a combination of unique materials and processes to enable weight reduction of greater than 30% at a cost of less than $2.25 per pound of weight saved, which could include very low?cost mode operation. Robust lean?burn

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

NOVEMBER 25, 2013

The US Department of Energy (DOE) Advanced Research Projects Agency - Energy (ARPA-E) will award up to $30 million to fund a new program focused on the development of transformational electrochemical technologies to enable low-cost distributed power generation. DE-FOA-0001026 ). Source: ARPA-E. Click to enlarge. Source: ARPA-E.

Fuel 231

Fuel Power Powered Gas-Electric 231

Green Car Congress

AUGUST 1, 2020

Gas Technology Institute. ASU’s Polymer-enhanced Cyanobacterial Bioproductivity (AUDACity). Scalable CO 2 electrocatalysis technologies. Project title. Federal share. Topic 1:Scale-Up of Bench Applications. University of Alabama. Topic 2: Waste to Energy Strategies for the Bioeconomy. AMP Robotics. UHV Technologies.

Waste 186

Waste Conversion Universal San Diego 186

Green Car Congress

APRIL 18, 2018

This topic seeks platinum group metal-free oxygen reduction electrocatalyst and electrode R&D enabling cost-competitive polymer electrolyte membrane fuel cells, as part of DOE’s Energy Materials Network.

Hydrogen 231

Hydrogen Fuel Polymer Concept 231

Green Car Congress

SEPTEMBER 30, 2009

The major technical hurdles for the development of succinic acid as a building block, the DOE report concluded, included the development of very low-cost fermentation routes. Furthermore, low cost succinic acid has high potential as a platform chemical and its downstream products.

Production 210

Production 2004 Low Cost Polymer 210

Green Car Congress

JUNE 19, 2013

Calysta Energy and NatureWorks have entered into an exclusive, multi-year collaboration to research and develop a practical production process for fermenting methane into lactic acid, the building block for Ingeo , lactide intermediates and polymers made from renewable materials.

Building 170

Building Energy Asia Waste 170