Remove Carbon Remove CO2 Remove Low Cost Remove Water
article thumbnail

PNNL team develops new low-cost method to convert captured CO2 to methane

Green Car Congress

By using a water-lean post-combustion capture solvent, (N-(2-ethoxyethyl)-3-morpholinopropan-1-amine) (2-EEMPA), they achieved a greater than 90% conversion of captured CO 2 to hydrocarbons—mostly methane—in the presence of a heterogenous Ru catalyst under relatively mild reaction conditions (170 °C and 2 pressure). Heldebrant, D.,

Convert 315
article thumbnail

GWU team demonstrates highly scalable, low-cost process for making carbon nanotube wools directly from CO2

Green Car Congress

Stuart Licht have demonstrated the first facile high-yield, low-energy synthesis of macroscopic length carbon nanotubes (CNTs)—carbon nanotube wool—from CO 2 using molten carbonate electrolysis ( earlier post ). The process is constrained by the (low) cost of electricity. —Johnson et al.

Low Cost 300
article thumbnail

8 Rivers announces 8RH2 CO2 Convective Reformer for ultra-low carbon hydrogen production from natural gas

Green Car Congress

8 Rivers Capital announced the development of the 8RH2 CO 2 Convective Reformer—a technology for the production of ultra-low carbon hydrogen from natural gas. It uses the oxy-combustion of carbon fuels and a high-pressure supercritical CO 2 working fluid in a highly recuperated cycle that captures all emissions by design.

Hydrogen 170
article thumbnail

EPFL team develops low-cost catalyst for splitting CO2

Green Car Congress

EPFL scientists have developed an Earth-abundant and low-cost catalytic system for splitting CO 2 into CO and oxygen—an important step towards achieving the conversion of renewable energy into hydrocarbon fuels. Using only Earth-abundant materials to catalyze both reactions, this design keeps the cost of the system low.

Low Cost 150
article thumbnail

GWU team suggests C2CNT carbon nanotube composites could amplify reduction of GHG emissions

Green Car Congress

Stuart Licht reports that the addition of carbon nanotubes (CNTs) produced from CO 2 by low-energy C2CNT (CO 2 to CNT) molten electrolysis ( earlier post ) to materials such as concrete or steel not only forms composites with significantly better properties, but amplifies the reduction of CO 2. A) Carbon mitigation with CNT-cement. (B)

Carbon 249
article thumbnail

DOE announces $11.5M in Phase 1 funding for carbon capture and storage program; ARPA-E FLECCS

Green Car Congress

million in funding for 12 projects as part of Phase 1 of the Advanced Research Projects Agency-Energy’s (ARPA-E’s) FLExible Carbon Capture and Storage (FLECCS) program. The post-combustion outlet gas is more easily separated into water and CO 2 to the pipeline, thereby lowering the electricity costs of grids with high levels of VRE.

Carbon 333
article thumbnail

GWU research team C2CNT advances to the final round of the Carbon XPRIZE; CO2 to carbon nanotubes

Green Car Congress

Stuart Licht, a chemistry professor at the George Washington University, and his team of researchers are among the finalists announced today in the $20-million Carbon XPRIZE competition. Stronger, more stress resistant & cheaper by weight than steel, C2CNT carbon nanotubes avoids > 160 ton CO 2 per ton steel replaced. Click to enlarge.

Carbon 150