Green Car Congress

NOVEMBER 18, 2016

Light duty vehicles are an emerging application for fuel cells that already enable 95% lower petroleum consumption per mile than conventional internal combustion engine vehicles. Proposed cathode catalyst concepts should demonstrate the potential to meet or exceed DOE’s 2020 activity target of 0.044 A/cm 2 at 0.9

Hydrogen 150

Hydrogen Fuel Carbon Fiber Water 150

Green Car Congress

NOVEMBER 17, 2016

Analysis suggests that cost parity between electric drive and internal combustion vehicles is possible under certain scenarios when battery pack costs fall below $125/kWh (useable energy). The purpose of this topic is to identify proof-of-concept or seedling projects that will complement the research in the Battery500 Program.

Carbon Fiber 150

Carbon Fiber Vehicles Nickel Lithium Low Cost 150

Green Car Congress

DECEMBER 2, 2009

Lite concept. Lite concept at the LA Auto Show. The new concept, based on Volkswagen’s New Small Family (the Up! models), incorporates a variation on the two-cylinder TDI hybrid powertrain from the L1 concept unveiled earlier this year at the Frankfurt Motor Show. Lite concept features a weight-optimized mix of metals.

MPG 265

MPG Concept Diesel Hybrid 265

Green Car Congress

MARCH 6, 2012

Toyota Motor Corporation (TMC) unveiled the FT-Bh (Future Toyota B-segment Hybrid), a lightweight, next-generation small gasoline-electric hybrid concept car at the 82nd Geneva International Motor Show. This concept shows what can be done when every aspect of the car is designed to reduce emissions. Reduced power consumption.

Plug-in 317

Plug-in Hybrid Toyota MPG 317

Green Car Congress

AUGUST 10, 2011

This project will optimize fuel-based control of novel combustion strategies in light- and heavy-duty vehicles to enable diesel-like efficiencies with ultra-low engine-out emissions. Light-weighting materials. Increased availability of low cost carbon fiber can enable vehicle weight reduction and improvement in fuel economy.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

SEPTEMBER 18, 2015

Ultra-Light Door Design, Manufacturing and Demonstration (Area of Interest 2). Vehma International of America. This project will design, develop, and demonstrate an ultra- light hybrid composite door and utilize predictive engineering (PE) to identify robust material and process design cycles. Clemson University.

Fuel 150

Fuel Carbon Fiber Lithium Ion Vehicles 150

Green Car Congress

SEPTEMBER 19, 2013

In collaboration with KraussMaffei, Henkel has developed a process for the manufacture of components based on glass or carbon fiber and using high-pressure resin transfer molding (HP-RTM) technology that creates a surface quality good enough for automobile exteriors.

Carbon Fiber 186

Carbon Fiber Production Carbon Manufacturer 186

Green Car Congress

DECEMBER 20, 2013

mpg) for light trucks by 2025 (54.5 mpg light duty average, or 4.3 Integrated computational materials engineering (ICME) development of carbon fiber composites for lightweight vehicles. mpg) for cars and 203 gCO 2 /mi (43.7 Powertrain friction and wear reduction.

Vehicles 246

Vehicles Fuel Economy Carbon Fiber Plug-in 246

Green Car Congress

OCTOBER 9, 2012

The automotive industry is showing greatly increased interest in the industrial applications of light materials. The initiators of eTAC have already proved that in close collaboration they are able to successfully develop innovative concepts for the aviation industry, including Airbus Industries. Advantages of thermoplastic composites.

Companies 225

Companies Netherlands Carbon Fiber Industrial 225

Green Car Congress

DECEMBER 16, 2010

Such engines may incorporate novel thermodynamic cycles, but should not simply involve regurgitation of existing concepts (e.g., approximately 45% peak thermal efficiency for light duty and greater-than 50% peak thermal efficiency for heavy duty). Development of Low-Cost Carbon Fiber. Miller Cycle).

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

JANUARY 13, 2015

Local Motors is 3D printing and assembling a Strati—the first 3D-printed car—live from the show floor at the North American International Auto Show (NAIAS). Made from a carbon fiber reinforced thermoplastic material by SABIC, the current model of the Strati takes approximately 44 hours to print 212 layers.

Motor 150

Motor Motors Motoring Carbon Fiber 150

Green Car Congress

JANUARY 22, 2015

DOE also announced up to $35 million to advance fuel cell and hydrogen technologies, including enabling the early adoption of fuel cell applications, such as light duty fuel cell electric vehicles. Area of Interest (AOI) 2: Ultra-Light Door Design, Manufacturing and Demonstration. less than a baseline structure.

Fuel 150

Fuel Hydrogen Vehicles Carbon Fiber 150

Green Car Congress

MAY 19, 2015

Solvay is taking a “leadership role” in the development of the Polimotor 2 all-plastic automotive engine to be tested in a race car next year, demonstrating the company’s advanced specialty polymer technologies in light-weighting through metal replacement. Mustang engine, used a combination of carbon fiber, Torlon, epoxy, ceramic and metal.

Carbon Fiber 150

Carbon Fiber Polymer Carbon Engine 150

Green Car Congress

JUNE 18, 2014

Earlier this month, Ford unveiled its Lightweight Concept vehicle, which uses advanced materials to explore future weight-reduction solutions that could improve performance and fuel efficiency while reducing CO 2 emissions. The result of this is reflected in the Ford concept. How light could you make vehicles? … Earlier post.).

Concept 284

Concept Carbon Fiber Vehicles Ford 284

Green Car Congress

SEPTEMBER 10, 2013

The combustion engine and electric motor, battery pack, power electronics, chassis components, and structural and crash functions are all arranged within the aluminum Drive module, while the central element of the Life module is the i8’s CFRP (carbon fiber reinforced plastic) passenger cell. Powertrain and driving experience.

BMW 306

BMW Plug-in 2014 MPG 306

Green Car Congress

DECEMBER 11, 2015

While the 700 bar compressed hydrogen storage used in current production light-duty FCEVs provides a near‐term commercialization pathway, the performance of this storage technology falls short of the DOE onboard FCEV Hydrogen Storage Program targets, particularly for volumetric hydrogen energy density and system cost. fleets, buses, etc.)

Hydrogen 150

Hydrogen Fuel Climate Production 150

Green Car Congress

JULY 10, 2010

Phase III applications are sought, to further develop and specifically demonstrate a promising system concept for bio-fueled SOFCs in distributed generation applications, with potential commercial viability. Film capacitors present an option for use as high voltage bus capacitors. Improved Magnetic Materials for Motors.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

SEPTEMBER 17, 2014

EOLAB features materials such as magnesium and aluminium, which are extremely light and also much cheaper than titanium. The Renault gasoline-electric plug-in hybrid system supports 60 km of electric range plus extended range due to the gasoline-fueled internal combustion engine. This light weight metal (density: 1.7)

Plug-in 370

Plug-in MPG Hybrid Plug 370

Green Car Congress

FEBRUARY 15, 2022

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. Harvesting Infrared Light to Improve Photosynthetic Biomass Production - $1,347,122. Select OPEN 2021 projects include: Synteris.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

SEPTEMBER 1, 2011

Daimler and BASF have developed a new joint concept electric vehicle that combines both companies’ ideas for holistic electric mobility. The use of advanced materials and technologies allowed new concepts to be implemented in the electric car that generate power as well as save it. Click to enlarge.

Design 246

Design Concept Energy Electric Vehicles 246

Green Car Congress

FEBRUARY 2, 2013

The objective of this AOI is to develop and demonstrate the capability of multi-material joining techniques for aluminum to advanced steel for light-duty vehicle body-in-white (BIW) joints. Carbon Fiber Polymer Composite. AOI 3: Body-in-white Joining of Aluminum to Advanced High Strength Steel at Prototype Scale.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

JANUARY 22, 2014

These areas of interest apply to light, medium and heavy duty on-road vehicles. AOI 2: Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles. ($6M) The fibers can be continuous or discontinuous and the resin can be either a thermoplastic or thermoset polymer.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Green Car Congress

OCTOBER 2, 2016

The last three letters of the vehicle’s name, the CatalIST, stand for “International SuperTruck,” referencing the company’s International commercial truck brand. Innovative use of lighter-weight carbon-fiber panels in the upper body, roof headers, back panel, and dash panel. New LT Series.

Fuel Economy 150

Fuel Economy Vehicles Wind Economy 150

Green Car Congress

AUGUST 14, 2014

Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles (Area of Interest 2). This project will develop, integrate and implement predictive models for Carbon-Fiber Reinforced Polymer composites that link the material design, molding process and final performance.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Cars That Think

AUGUST 8, 2022

But from a feathery (for an electric vehicle) 3,900-pound curb weight to wind-cheating aerodynamics, the carbon-fiber-bodied EQXX is designed for pure efficiency, not winning stoplight races. A 241-horsepower output delivers a reasonable 7-second trip from 0 to 60 miles per hour. The Benz sipped electrons at 8.7

Range 116

Range Mercedes Carbon Fiber France 116

Green Car Congress

AUGUST 27, 2020

Zero-carbon Ammonia-Powered Turboelectric (ZAPTurbo) Propulsion System; $2,652,778. The Zero-carbon Ammonia-Powered Turboelectric (ZAPTurbo) Propulsion System is a very high efficiency and light weight turboelectric system that uses green ammonia as both a fuel and a coolant via regenerative cooling.

Carbon 218

Carbon Hybrid Electric Electrical 218

Green Car Congress

JULY 30, 2013

With its new architecture, use of carbon fiber reinforced plastic, and premium mobility service offerings, the “ i3 marks the beginning of a new mobility age ,” said Dr. Reithofer. The SGL carbon fiber plant at Moses Lake, Washington, uses 100% hydropower. Closed-loop CFRP recycling.

BMW 247

BMW New York London Production 247

Green Car Congress

APRIL 10, 2012

In order of priority, low temperature exhaust after-treatment catalysts are needed for the reduction of Oxides of Nitrogen (NO x ), Carbon Monoxide (CO), or unburned hydrocarbons (HCs) from internal combustion engines. Hydrogen And Fuel Cell Technologies. Advanced Manufacturing.

Hydrogen 210

Hydrogen Fuel Range Vehicles 210

Baua Electric

MARCH 6, 2024

Second, many newcomers to the e-bike industry just aren’t prepared to drop several thousand dollars on a brand-new concept, making this price range critical for many first-time e-bike shoppers. But for just $799 , you’re still getting built-in lights, a hidden battery, large LCD display and a lightweight folder. 2 review here.

Price 52

Price Buy MPH Electric 52

Green Car Congress

OCTOBER 28, 2015

Acura unveiled the production model of the next-generation NSX at the North American International Auto Show (NAIAS) this past January ( earlier post ), and now has provided more technical detail on the high-performance hybrid sports car and its new Sport Hybrid-AWD power unit. The front floor panels are constructed of carbon fiber core.

Acura 150

Acura Hybrid Lithium Ion Engine 150

Baua Electric

JANUARY 13, 2024

Second, many newcomers to the e-bike industry just aren’t prepared to drop several thousand dollars on a brand-new concept, making this price range critical for many first-time e-bike shoppers. But for just $799 , you’re still getting built-in lights, a hidden battery, large LCD display and a lightweight folder. 2 review here.

Price 52

Price Buy MPH Electric 52

Green Car Congress

JULY 17, 2015

He was formerly with the University of Wisconsin and Rockwell International, and holds a Ph.D. Some examples are the use of fiberglass, carbon fiber and Kevlar substituting for wood and metal in vehicle parts, appliances and furniture products. More information on e-mile comparisons is given by Reference Nº 2.

PHEV 150

PHEV Plug-in Renewable Energy 150

Green Car Congress

JANUARY 4, 2022

Mercedes-Benz unveiled the VISION EQXX electric concept car ( earlier post )—a highly efficient, sleek concept car capable of exceeding 1,000 kilometers (620 miles) on a single charge with an outstanding energy consumption of less than 10 kWh per 100 kilometers (efficiency of more than 6 miles per kWh). BIONEQXX casting.

Mercedes 273

Mercedes Range Cars Electric 273