Green Car Congress

JULY 26, 2020

Toray Industries concluded an agreement with Lilium GmbH to supply carbon fiber composite materials for the Lilium Jet. The aircraft’s primary structures, such as the fuselage, wings and flaps will all be made from carbon fiber. Carbon fiber composite materials are needed to lighten such vehicles as the Lilium Jet.

Carbon Fiber 186

Carbon Fiber Carbon All-Electric Supplies 186

The Truth About Cars

JULY 27, 2023

The UK-based wheel specialist from Dymag and composites wizards from Korea's Hankuk Carbon have announced the development of a line of hybrid carbon-fiber wheels for Hyundai’s N cars.& Harmonic characteristics of carbon fiber are likewise supposed to help reduce noise, vibration, and harshness.

Carbon Fiber 95

Carbon Fiber Hyundai Carbon Hybrid 95

Green Car Congress

JANUARY 5, 2018

(SoCalGas) is partnering with a development team to advance a new process that converts natural gas to hydrogen, carbon fiber, and carbon nanotubes. The new catalyst system promotes “base growth” carbon nanotube formation rather than “tip growth,” the current technology. billion in 2016 and is expected to increase to $8.7

Carbon Fiber 280

Carbon Fiber West Virginia Hydrogen Carbon 280

Green Car Congress

MAY 9, 2014

A production line for carbon fiber takes the PAN precursor through two stages (stabilization/oxidation and carbonization) and then to winding. The site expansion, scheduled to be completed by early 2015, will make the plant in Moses Lake the world’s largest carbon fiber plant. 3,000 tons of carbon fiber.

Carbon Fiber 338

Carbon Fiber Carbon BMW Production 338

Baua Electric

MARCH 20, 2024

In the world of electric bikes, the words “carbon fiber” usually means big bucks. That means carbon fiber electric bikes have always commanded premium prices – at least, until now. But just because it’s a lower-cost bike doesn’t mean it’s cheap. That’s a featherweight in the e-bike world, believe it or not.

Carbon Fiber 52

Carbon Fiber Carbon Cheap MPH 52

Green Car Congress

MARCH 14, 2017

in cooperation with Ford Motor Company, developed a prototype carbon fiber composite subframe which reduces mass by 34% compared to making a stamped steel equivalent. We must continue to work hard to achieve these lightweight solutions at the most affordable costs.

Carbon Fiber 247

Carbon Fiber Carbon Ford Shelby 247

Green Car Congress

JULY 2, 2017

Department of Energy (DOE) grant to continue their research in developing low-cost, high-strength carbon fiber. The funding was part of DOE’s strategy to invest in discovery and development of novel, low-cost materials necessary for hydrogen storage and for fuel cells onboard light-duty vehicles.

Carbon Fiber 150

Carbon Fiber Kentucky Carbon Low Cost 150

Green Car Congress

DECEMBER 8, 2017

Today, acrylonitrile is used in the production of acrylic fibers for carpets, clothes, and fabrics, and in plastics such as food containers, and packaging materials. Yet none have been able to compete with the traditional process in terms of cost and yield. Now, new NREL research is showing promise toward achieving this goal.

Carbon Fiber 191

Carbon Fiber Renewable Carbon Eaton 191

Green Car Congress

JULY 30, 2014

million for two projects that aim to advance the production of cost-competitive, high-performance carbon fiber material from renewable, non-food-based feedstocks, such as agricultural residues and woody biomass. The US Department of Energy (DOE) will award up to $11.3

Carbon Fiber 273

Carbon Fiber Renewable Carbon Alabama 273

Green Car Congress

DECEMBER 15, 2017

This approach should speed the development of more economical carbon fiber materials. While stronger and lighter than steel, carbon fiber composites are relatively expensive. As part of the project, PNNL also analyzed the costs of long carbon fiber components versus standard steel and fiberglass composites.

Carbon Fiber 150

Carbon Fiber Carbon Affordable Virginia 150

Green Car Congress

FEBRUARY 4, 2014

The US Department of Energy (DOE) will award ( DE-FOA-0000996 ) up to $12 million in funding to advance the development of a cost-competitive pathway to produce high-performance carbon fiber for vehicle lightweighting from renewable non-food biomass. Reducing a vehicle’s weight by just 10% can improve fuel economy by 6% to 8%.

Carbon Fiber 316

Carbon Fiber Carbon Renewable Conversion 316

Green Car Congress

OCTOBER 9, 2012

At the Composites Europe event in Dusseldorf, Ford Motor Company displayed a prototype carbon fiber reinforced plastic (CFRP) hood. Carbon fiber offers a very high strength-to-weight ratio; it is up to five times as strong as steel, twice as stiff, and one-third the weight. Earlier post.)

Carbon Fiber 294

Carbon Fiber Carbon Ford Downsizing 294

Green Car Congress

APRIL 11, 2014

Danish start-up ECOmove has developed a technology which it says makes it possible to manufacture a carbon-fiber chassis without using special equipment. ECOmove calls its carbon-fiber technology Qstrung. The first unit has already been shipped to a company in Germany. —Mogens Løkke, CEO at ECOmove.

Carbon Fiber 225

Carbon Fiber Carbon 2009 Manufacturer 225

Green Car Congress

OCTOBER 13, 2016

PD Glasseiden, a Germany-based producer of fiberglass; European Carbon Fiber GmbH; and the ForschungsCampus Open Hybrid LabFactory e.V., In the first step at a location in Chemnitz, Saxony, CarboSax will build a pilot line for the sustainable production of carbon fibers.

Carbon Fiber 150

Carbon Fiber Germany Carbon Production 150

Green Car Congress

MAY 13, 2016

RMX Technologies and the Department of Energy’s Oak Ridge National Laboratory have signed an exclusive licensing agreement for a new technology that significantly reduces the time and energy needed in the production of carbon fiber. Oxidation is the most time-consuming phase of the multistep carbon fiber conversion process.

Carbon Fiber 150

Carbon Fiber Carbon Energy Production 150

Green Car Congress

APRIL 24, 2017

Mitsubishi Rayon (MRC) (which is now consolidated into Mitsubishi Chemical , along with Mitsubishi Plastis and the former Mitsubishi Chemical) recently announced that its carbon fiber sheet molding compound (SMC) has been adopted for the rear hatch frame of the new Toyota Prius PHV.

Carbon Fiber 150

Carbon Fiber Mitsubishi Prius Carbon 150

Green Car Reports

OCTOBER 14, 2014

Lightweight materials can help improve fuel efficiency, but they also add cost. One case in point is carbon fiber, which is light and strong, but also expensive.

Carbon Fiber 155

Carbon Fiber Carbon BMW Plug-in 155

Green Car Congress

MAY 20, 2022

Its hybrid electric and hydrogen powertrain aims to reduce downtime related to energy recharging while reducing the carbon footprint, including the battery. Renault Scénic Vision is zero emission in production and in use with a 75% smaller carbon footprint than a conventional battery electric vehicle.

Hydrogen 482

Hydrogen Carbon Concept Hybrid 482

Green Car Congress

APRIL 17, 2015

Ford and DowAksa signed a joint development agreement (JDA) formally to advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter. DowAksa is expanding on Aksa’s existing carbon fiber production assets.

Carbon Fiber 150

Carbon Fiber Carbon Ford Light 150

Green Car Congress

MARCH 13, 2017

The effort will identify styrene-free prepreg formulations with longer room temperature shelf life, shorter cycle times, and reduced cost. Advancements in these areas will increase productivity, decrease scrap and material costs, and enable adoption into the automotive industry. —Bryan G. Dods, IACMI CEO.

Carbon Fiber 150

Carbon Fiber Carbon USA Tennessee 150

Green Car Congress

FEBRUARY 22, 2015

Driven by a faster-than-expected pace of technology development, carbon-fiber reinforced plastics (CFRPs) will be poised to gain widespread adoption for automotive lightweighting by 2025, according to a new report from Lux Research, “Scaling Up Carbon Fiber: Roadmap to Automotive Adoption.”. Earlier post.)

Carbon Fiber 150

Carbon Fiber Carbon Automobile 2007 150

Green Car Congress

AUGUST 18, 2016

and Purdue University, has launched the first project selected with a dual focus on decreasing the cost of manufacture and increasing design flexibility for automotive composites. Multiple factors, including cost and design constraints, present barriers to the adoption of composites in high volume automotive applications.

Carbon Fiber 150

Carbon Fiber Carbon Tennessee Universal 150

Green Car Congress

MARCH 8, 2016

Continental Structural Plastics (CSP) has signed a memorandum of understanding with Mitsubishi Rayon (MRC), regarding the development and manufacturing of innovative carbon fiber structural components for the automotive industry in North America. Also key was reducing the cycle time associated with the use of carbon fiber.

Carbon Fiber 150

Carbon Fiber Carbon Mitsubishi North America 150

Green Car Congress

AUGUST 22, 2013

The US Department of Energy (DOE) has issued a Request for Information (RFI) ( DE-FOA-0000975 ) regarding the state of technology development and commercial readiness of emerging renewable carbon fiber (RCF) technologies.

Carbon Fiber 186

Carbon Fiber Carbon Renewable Detroit 186

Green Car Congress

JANUARY 12, 2015

Ford and DowAksa are accelerating joint research to develop high-volume manufacturing techniques for automotive-grade carbon fiber, aiming to make vehicles lighter for greater fuel efficiency, performance and capability. Ford and Dow Chemical began working together in 2012 to develop low-cost, high-volume carbon fiber composites.

Carbon Fiber 150

Carbon Fiber Carbon Parts Ford 150

Green Car Congress

SEPTEMBER 27, 2013

Zoltek is a large two carbon fiber manufacturer; large tow carbon fiber is carbon fiber with 40,000 or more filaments applied for applications such as wind turbine blades and reinforced plastics compounds, and is produced on modified acrylic staple fiber production lines for textiles. per share).

Carbon Fiber 199

Carbon Fiber Wind Carbon Hungary 199

Green Car Congress

JUNE 22, 2015

The ThyssenKrupp Carbon Components – Maxion Wheels team will work with OEMs to develop custom solutions to meet their specific needs. Maxion Wheels and ThyssenKrupp Carbon Components will continue to enhance the value proposition of the lightweight aluminum and carbon fiber hybrid wheels.

Carbon Fiber 150

Carbon Fiber Carbon Hybrid SUV 150

Green Car Congress

MARCH 9, 2015

On the basis of the now-complete material research, the transfer of the special systems made from carbon fibers and matrices into specific applications of customers in the automotive industry is now under way. The composite is based on a reactive polyamide system and compatible carbon fibers.

Carbon Fiber 150

Carbon Fiber Carbon 2012 Manufacturer 150

Green Car Congress

APRIL 12, 2012

Ford Motor Company is partnering with Dow Automotive Systems, a business unit of The Dow Chemical Company, to research the use of advanced carbon fiber composites in high-volume vehicles. Carbon fiber composites have been used in aerospace and racing cars for decades due to their unique combination of high strength and low mass.

Carbon Fiber 247

Carbon Fiber Carbon Ford Vehicles 247

Green Car Congress

OCTOBER 4, 2012

As innovative new production technologies lower carbon fiber cost, the global market for carbon fiber reinforced plastics (CFRPs) will more than double to $36 billion in 2020, growing at a compound annual growth rate of 13% from $14.6 Among their findings: Cutting precursor costs is critical.

Carbon Fiber 218

Carbon Fiber Wind Carbon 2020 218

Green Car Congress

OCTOBER 10, 2010

FHI) with carbon fiber for car bodies later this year—the first use of carbon fiber for auto bodies mass-produced in Japan. Toyota reportedly will use carbon fiber for the hood and roof of the Lexus LFA, a luxury sports car to be produced starting in December. (TMC) and Fuji Heavy Industries Ltd.

Carbon Fiber 199

Carbon Fiber Carbon Toyota Supplies 199

Green Car Congress

SEPTEMBER 10, 2011

27 city EV, earlier post ) to create the T-Wave AR1, a concept EV two-seater to demonstrate the extreme weight savings possible with Toray’s carbon fiber composites. The use of carbon fiber for the frame as well as more typical parts, such as exterior body panels and seats, keeps the weight down to 846 kg (1,865 lbs).

Carbon Fiber 210

Carbon Fiber Carbon Concept Cars 210

Green Car Congress

OCTOBER 19, 2020

The team projects that the high-efficiency vehicle will have a a minimum unit cost of only $1,400 to produce—the price of an average mountain bike—once the funding goal is reached. The VEGAN is a lightweight multipurpose hybrid electric-self-charging solar tricycle. The team has not yet produced a working demo for their concept.

Pakistan 418

Pakistan Low Cost Solar Charging 418

Green Car Congress

DECEMBER 20, 2011

signed a definitive agreement to form a joint venture to manufacture and commercialize carbon fiber and derivatives. The joint venture will develop and globally market a broad range of products and technical service support in the rapidly expanding carbon-fiber based composites industry.

Carbon Fiber 230

Carbon Fiber Carbon Turkey Wind 230

Green Car Congress

JULY 24, 2013

Plasan Carbon Composites (PCC), a supplier of carbon fiber solutions to the automotive industry and a subsidiary of composites solutions pioneer Plasan Sasa, Inc, has partnered with Toray Industries to bring additional material and technology capabilities and solutions to its automotive and commercial customers.

Carbon Fiber 170

Carbon Fiber Carbon Market Shelby 170

Revenge of the Electric Car

APRIL 12, 2010

BMW MegaCity Urban Electric Car To Be Built of Carbon Fiber. First, the raw feedstock to make carbon fibers–just call it a “polacrylonitrile-based precursor&# –is made in Japan by a joint venture between SGL and Mitsubishi Rayon and flown to the U.S. April 7th, 2010. By John Voelcker Senior Editor.

Carbon Fiber 133

Carbon Fiber BMW Carbon Mitsubishi 133

Green Car Congress

JULY 21, 2020

The projects will feature collaborations with EERE’s Advanced Manufacturing Office on manufacturing reliable and affordable electrolyzers and with EERE’s Vehicle Technologies Office on developing low-cost, high-strength carbon fiber for hydrogen storage tanks. Carbon Composite Optimization Reducing Tank Cost.

Carbon Fiber 321

Carbon Fiber Hydrogen Low Cost Polymer 321