Green Car Congress

OCTOBER 6, 2016

The US Department of Energy (DOE) Energy Department (DOE) released a new report showing continued momentum and growth in the fuel cell industry. Fiscal year 2017 funding will also be targeted at the development of low-cost, high-strength precursors for carbon fibers that can be used in vehicular hydrogen storage vessels.

Industrial 253

Industrial Industry Fuel Carbon Fiber 253

Green Car Congress

DECEMBER 17, 2019

H2@Scale supports innovations to produce, store, transport, and utilize hydrogen across multiple sectors, covering collaborations between various industry stakeholders and national laboratories. Advanced Carbon Fiber for Compressed Hydrogen and Natural Gas Storage Tanks. H2@Scale New Markets R&D—HySteel.

Market 195

Market Carbon Fiber Hydrogen Mariner 195

Green Car Congress

AUGUST 21, 2015

A team led by Dr. Stuart Licht at The George Washington University in Washington, DC has developed a low-cost, high-yield and scalable process for the electrolytic conversion of atmospheric CO 2 dissolved in molten carbonates into carbon nanofibers (CNFs.) —Stuart Licht.

Low Cost 150

Low Cost Carbon Li-ion Carbon Fiber 150

Green Car Congress

MAY 20, 2014

The project will demonstrate a novel resin system that reduces the use of expensive carbon fiber composites for high pressure storage tanks. PPG Industries of Greensboro, North Carolina will receive $1.2 million to screen systematically low cost alternative materials for use in hydrogen storage systems.

Hydrogen 230

Hydrogen Carbon Fiber San Francisco North Carolina 230

Green Car Congress

OCTOBER 24, 2016

This consortium will utilize the expertise and capabilities of the national laboratories to accelerate the development of commercially viable pathways for hydrogen production from renewable energy sources. Earlier post.) Establishing robust online data portals that capture and share the results of non-proprietary research.

Water 150

Water Hydrogen Production Green 150

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.)

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

MAY 19, 2014

A new review article in the journal Science highlights emerging opportunities to increase the transformation of lignin to value-added products—i.e., Each product stream, however, has its own distinct challenges. lignin valorization. Simplified process flow diagram illustrating paths to recover lignin.

Production 225

Production Carbon Fiber Polymer Fuel 225

Green Car Congress

NOVEMBER 15, 2021

Kawasaki Heavy Industries, Ltd., jointly announced that, toward the achievement of carbon neutrality, they will take on the challenge of expanding fuel options through the use of internal combustion engines at the (three-hour) Super Taikyu Race in Okayama on 13-14 November. Fukuoka City hydrogen production facility.

Mazda 387

Mazda Hydrogen Toyota Transportation 387

Green Car Congress

SEPTEMBER 25, 2011

Sumitomo Metal Industries Ltd. Toray Industries Inc. are working to develop technology for producing carbon fiber at low cost. Toray Industries Inc. are working to develop technology for producing carbon fiber at low cost. and Teijin Ltd. and Teijin Ltd.

Manufacturer 218

Manufacturer Carbon Fiber Vehicles Low Cost 218

Green Car Congress

NOVEMBER 18, 2016

The US Department of Energy (DOE) announced approximately $30 million in available funding ( DE-FOA-0001647 ), subject to appropriations, for research and development of low-cost hydrogen production, onboard hydrogen storage, and proton exchange membrane fuel cells to advance the widespread commercialization of fuel cell electric vehicles.

Hydrogen 150

Hydrogen Fuel Carbon Fiber Water 150

Green Car Congress

JANUARY 9, 2015

The new Institute for Advanced Composites Manufacturing Innovation (IACMI), announced today by President Obama, will focus on advanced fiber-reinforced polymer composites that combine strong fibers with tough plastics to yield materials that are lighter and stronger than steel. PolyOne Corporation; PPG Industries, Inc.;

Tennessee 150

Tennessee Universal Manufacturer Honda 150

Green Car Congress

OCTOBER 31, 2013

The office encourages collaborative approaches with teaming across multiple entities including university, industry, and/or national labs with complimentary disciplines and expertise necessary for a holistic approach. The FOA includes the following topics: Topic Area 1: Reducing the cost of compressed hydrogen storage systems.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

MARCH 31, 2014

By the end of Phase II, Mainstream plans to demonstrate a production-ready prototype that exceeds DOE targets for fuel economy, operating range, and cost. Low-Cost, High-Energy Si/Graphene Anodes for Li-Ion Batteries. Composite Coatings for Low-Cost Motor Windings in Electric Vehicles. Nextech Materials.

Exhaust 261

Exhaust Wind 2014 Motor 261

Green Car Congress

AUGUST 26, 2016

million in federal funding for cost-shared projects that will develop technologies that utilize CO 2 from coal-fired power plants to produce useful products. Another option is to use the CO 2 as a reagent to create useful products, such as cement, plastics, or liquid fuels. —DE-FOA-0001622.

Convert 150

Convert Production Coal CO2 150

Green Car Congress

MAY 29, 2010

Everybody is growing carbon nanotubes on substrates. This means we can produce the material at a low cost, and it also means we can produce pieces big enough to cover an aircraft. Various industries have been replacing metals with composites in structures and components because of their lighter weight and durability.

Carbon Fiber 170

Carbon Fiber Energy Production Ohio 170

Green Car Congress

AUGUST 10, 2011

This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

OCTOBER 30, 2022

For example, IDTechEx expects that lithium-metal and solid-state batteries, axial flux motors, and carbon fiber materials will play an important role in eVTOL markets. The new regulations are driving interest in e-fuels, ammonia, and hydrogen as the industry scrambles to find multiple silver bullets.

Market 150

Market Electric Vehicles Vehicles Cars 150

Green Car Congress

MAY 14, 2013

The Hydrogen Compression, Storage, and Dispensing Cost Reduction Workshop was held at Argonne National Laboratory (ANL) on 20–21 March 2013, and featured 36 participants representing industry, government, and national laboratories with expertise in the relevant fields. Other Forecourt Issues Cost Reduction Opportunities.

Cost Of 199

Cost Of Hydrogen Carbon Fiber Low Cost 199

Green Car Congress

SEPTEMBER 18, 2015

This project will develop a low cost, ultra-compact power module using innovative integrated-cooling to increase power density, improve performance, and reduce cost. This project will develop an integrated flame spray process for low cost production of battery materials for lithium ion batteries and beyond.

Fuel 150

Fuel Carbon Fiber Lithium Ion Vehicles 150

Green Car Congress

AUGUST 7, 2020

REPAIR teams will develop technology that enables gas utilities to update their distribution systems at low cost and continue to reliably service commercial and residential gas delivery needs nationwide. Natural gas is a crucial energy source for 75 million American households and businesses. —ARPA-E Director Lane Genatowski.

Gas 297

Gas Gas-Electric Universal Colorado 297

Green Car Congress

MARCH 24, 2016

Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated a production method they estimate will reduce the cost of carbon fiber as much as 50% and the energy used in its production by more than 60%. Details of the cost analysis will be shared with the prospective licensees.

Carbon Fiber 150

Carbon Fiber Carbon Manufacturer Energy 150

Green Car Congress

SEPTEMBER 16, 2010

These projects, funded as part of DOE’s Small Business Phase III Xlerator program, will help small businesses develop manufacturing processes to scale up production of their new, proven technologies. Overcoming cost and scale challenges is critical for small businesses to successfully bring their ideas to the marketplace, DOE notes.

Fuel 210

Fuel Energy Carbon Fiber Polymer 210

Green Car Congress

AUGUST 16, 2016

Accelerated Development and Deployment of Low‐Cost Automotive Mg Sheet Components (Area of Interest 3). Demonstrate the joining of steel to aluminum and aluminum to carbon fiber reinforced thermoplastic composites using the existing spot welding infrastructure. PPG Industries, Inc. Description. Federal funding.

Vehicles 150

Vehicles Plug-in Lithium Ion Universal 150

Green Car Congress

DECEMBER 16, 2010

The engines shall have extremely low engine-out nitrogen oxides (NO x ) and particulate matter (PM) as a target; and shall have efficiency similar to state-of-the-art direct injection diesel engines (i.e., DOE highly encourages applicants to collaborate and team with an original equipment manufacturer (OEM) or industrial supplier.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

MARCH 23, 2016

Researchers at Oak Ridge National Laboratory (ORNL) have developed a new class of high-performance thermoplastic elastomers for cars and other consumer products by replacing the styrene in ABS (acrylonitrile, butadiene and styrene) with lignin, a brittle, rigid polymer that, with cellulose, forms the woody cell walls of plants.

Renewable 150

Renewable Polymer Carbon Fiber Commercial 150

Green Car Congress

JUNE 12, 2012

The top two awards, one of $9 million to a project led by Dow Chemical, and one of $8.999 million to a project led by PolyPlus, will fund projects tackling, respectively, the manufacturing of low-cost carbon fibers and the manufacturing of electrodes for ultra-high-energy-density lithium-sulfur, lithium-seawater and lithium-air batteries.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

JULY 10, 2010

Harvesting/Dewatering Technology for Algal Biofuels Production. The Office of Biomass Program (OBP) is seeking Phase III applications to further commercial development of harvesting/dewatering processes—contingent upon successful completion of SBIR Phase I or Phase II development—to support the production of algal biofuels.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

FEBRUARY 15, 2022

These new GaN power devices will enable the next generation of low-cost, fast, small, and reliable power electronics, which are key for efficient power conversion in data centers, solar farms, power grids, and electric vehicles. Harvesting Infrared Light to Improve Photosynthetic Biomass Production - $1,347,122.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

NOVEMBER 17, 2014

Related to this, DOE seeks by 2020 to develop novel precursors and conversion processes capable of reducing the high-volume cost of high-strength carbon fiber by 25% from $13 per pound to ~$9 per pound. In FY 2014, one area of focus was low-cost, high-strength carbon fiber precursors and advanced tank designs.

Hydrogen 225

Hydrogen Carbon Fiber 2014 St. Louis 225

Green Car Congress

MARCH 9, 2019

Known as 223 and Racetrak, these technologies offer comparable performance to existing composites solutions, but with a range of additional benefits, and at a cost that brings them within reach of mainstream applications. CFRP is a material of huge promise.

Engine 265

Engine Carbon Fiber Affordable Manufacturer 265

Green Car Congress

SEPTEMBER 6, 2019

This unique production process creates an engineered hinge embedded within a single composite preform of carbon fiber reinforced polymer (CFRP). 223 enables the creation of 3D structures from 2D materials, opening the potential for manufacture techniques previously constrained by cost or production rate.

Engine 191

Engine Batteries Battery Carbon Fiber 191

Green Car Congress

JANUARY 9, 2018

The awarded projects are part of a second round of industrial assistance opportunities ( earlier post ) supported by DOE’s LightMAT—the Lightweight Materials Consortium.( The five industry-national laboratory teams will collaborate to address the following technical challenges during the next two years. Earlier post.).

Carbon Fiber 150

Carbon Fiber Wisconsin General Motors Low Cost 150

Green Car Congress

FEBRUARY 2, 2013

When the final funding opportunity announcement is released following this public comment period, DOE will accept applications from industry, national laboratories, and university-led teams to address these challenges and enable technologies that drive innovation in vehicle design. Carbon Fiber Polymer Composite.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

JANUARY 4, 2020

These projects aim to develop tools, methods, and technologies to enhance cost-effectively the safety and efficiency of the US’ natural gas production, gathering, storage, and transmission infrastructure. AOI 2: Process-Intensified Technologies for the Upcycling of Flare Gas into Transportable, Value-Added Products.

Gas 186

Gas Gas-Electric West Virginia Carbon Fiber 186

Green Car Congress

SEPTEMBER 21, 2017

Topic Area 2: High-value products from waste and/or other undervalued streams in an integrated biorefinery. Topic Area 3: Industrial separations within an integrated biorefinery (no projects have been selected from topic area 3). The MIBR will improve IBR sustainability and cost-effectiveness.

South Dakota 150

South Dakota South Carolina Carbon Fiber Texas 150

Green Car Congress

APRIL 10, 2012

Phase I projects must complete (1) a preliminary design; (2) a characterization of laboratory devices using the best measurements available, including a description of the measurement methods; and (3) the preparation of a road map with major milestones, that would lead to a production model of a system that would be built in Phase II.

Hydrogen 210

Hydrogen Fuel Range Vehicles 210

Green Car Congress

AUGUST 14, 2014

Development of Low-cost, High Strength Automotive Aluminum Sheet (Area of Interest 1). Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles (Area of Interest 2). Delta Products Corp. PPG Industries, Inc. Description. Alcoa, Inc.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299