Green Car Congress

JULY 18, 2022

Rolls-Royce is planning a comprehensive series of rig and engine tests to prove hydrogen can safely and efficiently deliver power for small-mid size aircraft from the mid-2030s onwards. The company has further ambitions to move this on to a flight test phase as part of the program in the long term.

Hydrogen 500

Hydrogen Engine Hybrid Mississippi 500

Green Car Congress

MAY 10, 2023

Designed in-house by McLaren’s powertrain team, the new high-performance V8 engine will power the next generation of lightweight, high-performance hybrid supercars as part of the company’s Future of Performance strategy. This is the third extension and fourth generation of the engine supply agreement between the two companies.

Supplies 273

Supplies Engine Hybrid 2011 273

Green Car Congress

APRIL 4, 2023

In addition to recent investments in Fridley, Cummins is investing more than $1 billion across its US engine manufacturing network in Indiana, North Carolina and New York. Over half of all medium- and heavy-duty trucks on the road in the US today use Cummins engines, the company said. The Cummins Power Systems factory is a 1.1

North Carolina 304

North Carolina Manufacturer Engine Indiana 304

Green Car Congress

JANUARY 19, 2021

Rolls-Royce is supplying two mtu 16V 4000 M55RN gas engines to Sembcorp Marine Integrated Yard for the construction of the first liquefied natural gas (LNG)-hybrid powered tug. This is the first LNG-hybrid tug to be powered by mtu gas engines. The new engines are part of Rolls-Royce’s Green and High-Tech program.

Gas 418

Gas Engine Hybrid Supplies 418

Green Car Congress

MAY 6, 2022

UMVs are designed to assist in natural resource management, disaster management, all-urban and rural logistics, construction, mining and space resource development. Located inside Montana State University’s (MSU) Innovation Campus, New Horizons Studio’s all-new Bozeman facility will focus on: Product design and development.

Montana 195

Montana Las Vegas Design Hyundai 195

Green Car Congress

JUNE 8, 2021

CMAL) to partner in designing a hydrogen fuel-cell sea-going passenger and car ferry—a first for Europe. This is part of HYSEAS III , a Horizon 2020 funded project ( earlier post ). This process is used to mitigate risk by fully validating the vessel’s powertrain prior to committing to full vessel build cost.

Hydrogen 436

Hydrogen Design Fuel Mariner 436

Green Car Congress

AUGUST 3, 2021

Coupling our opposed-piston technology with Cummins’s robust engine design, manufacturing, and new product introduction capabilities allows us to create a high performing and reliable engine for military operations. Earlier post.). —Dave Crompton, President and CEO of Achates Power.

Engine 488

Engine Hybrid Affordable Diesel 488

Green Car Congress

JUNE 19, 2023

Venus has developed—as part of a technology portfolio aimed at producing its envisioned Stargazer hypersonic aircraft—a liquid-propellant rotating detonation rocket engine (RDRE) with a double-digit percentage increase in efficiency over standard regular engines. Aerospace 9(10):581.

Engine 195

Engine Houston Building Global 195

Green Car Congress

JUNE 22, 2023

The first engine retrofit in the industry is scheduled to be conducted medio 2024 and it is the intent to replicate on sister vessels when going for special survey in 2027. Maersk has set a net-zero emissions target for 2040 across the entire business; retrofitting of engines to run on methanol is an important lever in this strategy.

Engine 284

Engine Conversion Fuel Green 284

Green Car Congress

MARCH 17, 2019

UK-based Reaction Engines has received further endorsement of its SABRE (Synergetic Air-Breathing Rocket Engine) design ( earlier post ) via its collaboration with ESA and the UK Space Agency (UKSA). —Shaun Driscoll, Programs Director, Reaction Engines. —Mark Ford, head of ESA’s Propulsion Engineering section.

Design 220

Design Engine Colorado United States 220

Green Car Congress

MARCH 13, 2020

As the Volkswagen Chattanooga factory ramps up production of the new Atlas Cross Sport, and lays groundwork for assembling the next generation of Volkswagen electric vehicles planned to begin in 2022, engineers are using augmented reality (AR) goggles to design production lines and help spot potential issues. —Frantisek Zapletal.

Design 317

Design Production Tennessee IDEA 317

Green Car Congress

MAY 26, 2022

Lilium, developer of an all-electric vertical take-off and landing (eVTOL) jet, is partnering with Honeywell and DENSO, who will co-develop and manufacture the Lilium Jet’s electric motor that will power the Lilium Jet’s engines. Aernnova and Lilium will work together on the design, manufacture, and supply of the Lilium Jet’s flap structure.

Design 221

Design Manufacturer Motor Motors 221

Green Car Congress

FEBRUARY 27, 2021

Nuvera Fuel Cells, LLC, a provider of fuel cell power solutions for motive applications, has expanded its hydrogen fuel cell engine testing capabilities with the commissioning of a large-scale durability test facility in Italy. main plant in Osio, was designed, constructed and commissioned over a period of three years.

Engine 259

Engine Fuel Italy Hydrogen 259

Green Car Congress

AUGUST 25, 2020

Reaction Engines Ltd and Rolls-Royce plc announced a new strategic partnership agreement to develop high-speed aircraft propulsion systems and explore applications for Reaction Engines’ thermal management technology within civil and defence aerospace gas turbine engines and hybrid-electric systems.

Engine 393

Engine Hybrid Gas-Electric Electric 393

Green Car Congress

MAY 2, 2019

NextGenAM partners Premium AEROTEC, EOS and Daimler are building a pilot production line for a next-generation automated additive manufacturing (AM) process. Retainer of the truck diesel engine—the first spare part of the partner pilot project NextGenAM, from Daimler, Premium AEROTEC and EOS.

Parts 223

Parts Manufacturer Building Production 223

Cars That Think

APRIL 29, 2024

As a data-center network engineer with Meta’s network infrastructure team, Susana Contrera is playing a leading role in this unprecedented technology rollout. Her job is about “bringing designs to life,” she says. But she decided to pursue a career in engineering because of her parents, who were small-business owners.

Engine 113

Engine Venezuela Building Universal 113

Green Car Congress

JULY 12, 2023

MAHLE has received a series order from engine manufacturer DEUTZ for the development and supply of components for hydrogen engines. units consisting of the piston, the piston ring pack and the piston pin—which DEUTZ plans to use in stationary hydrogen engines for the first time from the end of 2024. Sebastian C.

Hydrogen 195

Hydrogen Engine Supplies Climate 195

Green Car Congress

JULY 22, 2022

The open fan architecture is a key component of aero engine maker CFM International’s “Revolutionary Innovation for Sustainable Engines” (RISE) technology development program ( earlier post ), which aims to demonstrate and mature a range of new technologies for future engines that could enter service by the mid-2030s.

Engine 273

Engine Installation France Design 273

Green Car Congress

JULY 12, 2023

Ricardo is working in collaboration with Achates Power to develop the next generation of opposed-piston (OP) gasoline compression ignition (GCI) engines for light duty vehicles in a multi-phased project (BERYL), funded by the US Department of Energy (DOE) Advanced Research Projects Agency-Energy (ARPA-E). Earlier post.) Earlier post.)

Engine 150

Engine Power Powered Fuel Economy 150

Green Car Congress

JULY 28, 2021

MAN Energy Solutions has won the order to supply the world’s first, low-speed, dual-fuel engine to run on methanol within the container segment. The engine will be Tier III-compliant. The MAN B&W LGIM engine is the methanol-burning version of its dual-fuel solution for liquid injection of fuels, the ME-LGI engine.

Engine 259

Engine Oil Fuel Supplies 259

Teslarati

APRIL 14, 2021

Recent reports have indicated that Taiwan’s Pegatron has selected a site in El Paso, Texas, for an upcoming production facility that would provide parts for American electric car maker Tesla. The post Tesla supplier Pegatron is building a parts plant in Texas appeared first on TESLARATI.

El Paso 145

El Paso Texas Parts Building 145

Green Car Congress

JULY 15, 2022

The BMW M Hybrid V8 is powered by the P66/3 eight-cylinder turbo engine with supplementary electric drive. The combustion engine is based on the DTM unit used in the BMW M4 DTM in 2017 and 2018. BMW M Hybrid V8 engine. That saved us time and a lot of money and was therefore efficient and sustainable.

BMW 293

BMW Engine Hybrid Oil 293

Green Car Congress

FEBRUARY 17, 2021

Lotus unveiled the E-R9, a new design study for a next-generation pure electric endurance racer that could be on the starting grid of circuits around the world for the 2030 season. Visually it was brought to life by the Lotus Design team, led by Russell Carr, Design Director for Lotus.

Design 243

Design Tribute Grid Battery 243

Cars That Think

MARCH 25, 2024

Starting a new engineering program at a university is no simple task. By 2026, the university will offer an undergraduate engineering degree —but without creating an engineering department. IEEE Spectrum spoke with Seth Fraden, one of the new program’s interim cochairs, about getting a new engineering program up and running.

Engine 79

Engine Universal Design United States 79

Green Car Congress

APRIL 18, 2020

Tier II-compliant main engines for three 238-meter hybrid RoRo vessels intended for operation in the Baltic Sea. The customer is Finnlines, the Finnish shipping company and part of the Grimaldi Group. Designed by Knud E. —will build the engines in Korea, while Nanjing Jinling shipyard in China will construct the vessels.

Supplies 362

Supplies Engine Hybrid Energy 362

Green Car Congress

OCTOBER 19, 2022

Used in many industrial applications, CFD is key to improving advanced equipment design by, for example, optimizing aerodynamics and thermodynamics. The nonlinear and linear parts are solved on classical and quantum hardware, respectively.

Design 186

Design Parts Carbon Gas 186

Green Car Congress

MARCH 9, 2017

Ford Motor Company is exploring how large-scale one-piece auto parts, such as spoilers, could be printed for prototyping and future production vehicles, as the first automaker to pilot the Stratasys Infinite Build 3D printer. The new 3D printer system is housed at Ford Research and Innovation Center in Dearborn.

Parts 170

Parts Ford Building Affordable 170

Green Car Congress

AUGUST 17, 2023

Occidental announced that a wholly owned subsidiary— 1PointFive —has entered into a definitive purchase agreement to acquire all the outstanding equity of Carbon Engineering Ltd. (CE) Occidental has been working with Carbon Engineering on direct air capture (DAC) deployment since 2019. Earlier post.)

Carbon 150

Carbon Engine Companies Texas 150

Green Car Congress

SEPTEMBER 19, 2019

UK-based automotive engineering specialist Drive System Design (DSD) will present a system-level approach for EV powertrain design in a paper at the 17 th CTI China Symposium in Shanghai from 23-25 September. Our system approach to the design of EV powertrains helps to future-proof them against the uncertainties that lie ahead.

Design 191

Design Future Grant Commercial 191

Cars That Think

MAY 13, 2023

TSMC), which was already building a $12 billion fab in Arizona , upped the investment to $40 billion with a second plant. economy, there’s a potential problem: Where will the industry find the qualified workforce needed to run these plants and design the chips they’ll make? Taiwan Semiconductor Manufacturing C o.

Universal 136

Universal Building Ohio Arizona 136

Green Car Congress

MAY 3, 2021

Williams Advanced Engineering (WAE) and Italdesign are parterning to provide the upper premium automotive sector with a complete high-performance EV production solution. EVX integrates the battery casing with elements more commonly perceived as part of the body structure.

Engine 221

Engine Design Battery Batteries 221

Green Car Congress

JANUARY 28, 2021

Achates Power was recently awarded a $5-million contract from the US Army to expand the family of opposed-piston engines for military vehicles. The project, awarded in late-2020, builds upon the success of the Advanced Combat Engine (ACE). to develop the Advanced Combat Engine for the US Army. Earlier post.)

Power 418

Power Powered Vehicles Exhaust 418

Green Car Congress

DECEMBER 22, 2016

Control of fuel sprays is key to the development of clean, affordable fuel-efficient engines. Intended for industry, software vendors and national laboratories, the consortium provides a direct path from fundamental research to validated engineering models ultimately used in combustion engine design. —Lyle Pickett.

Engine 150

Engine Design Isuzu Massachusetts 150

Teslarati

APRIL 6, 2021

SpaceX has begun installing the first of numerous propellant storage tanks at its first orbital South Texas launch facilities – a mostly ordinary and expected step made extraordinary by the fact that those tanks will be built out of Starship parts. Instead, SpaceX has decided to design and build its own propellant storage tanks.

Building 124

Building Parts Cheap Texas 124

Cars That Think

DECEMBER 21, 2023

Greta Bekerytė started out cleaning offices and ended up designing electronics for EV charging stations. Today she works as a hardware engineer at Zaptec , which makes electric-vehicle charging stations and is also based in Stavanger. It’s amazing what you can accomplish in your career when you follow your dreams. It wasn’t easy.

Clean 103

Clean Cleaning Design Lithuania 103

The Truth About Cars

JANUARY 19, 2024

But styling and lineup changes weren’t the only new features in 1957: Cadillac was also eager to tout its Standard of the World engineering, safety, and engine advancements! & That slight stretch was accompanied by a new chassis design, as the C-body (and all Cadillacs in 1957) adopted a tubular X-frame setup.

Cadillac 87

Cadillac Parts GM Legal 87

Cars That Think

APRIL 4, 2023

Discussions at chip design conferences rarely get heated. But a year ago at the International Symposium on Physical Design , things got out of hand. The crux of the clash was whether Google’s AI solution to one of chip design’s thornier problems was really better than humans or state-of-the-art algorithms. Kahng was reviewer #3.)

Design 126

Design Google Standards Commercial 126