Green Car Congress

JULY 7, 2015

The lead inventors of the technology are UCSB professor Dr. Alan Heeger, the recipient of a Nobel Prize in 2000 for the discovery and development of conductive polymers, and Dr. David Vonlanthen, a project scientist and expert in energy storage at UCSB. doubling the range of a Tesla, and costing four times less. . 1 hour (1C).

Polymer 150

Polymer Li-ion Low Cost 2014 150

Green Car Congress

MARCH 8, 2013

Schematic illustration of the aqueous rechargeable lithium battery (ARLB) using the coated lithium metal as anode, LiMn 2 O 4 as cathode and 0.5 Researchers from Fudan University in China and Technische Universität Chemnitz in Germany have developed an aqueous rechargeable lithium battery (ARLB) using coated Li metal as the anode.

Li-ion 281

Li-ion Low Cost Recharge Ni-Li 281

Green Car Congress

SEPTEMBER 14, 2020

Researchers from the University of Western Ontario (UWO), University of Toronto and Glabat Solid-State Battery Inc. have clarified the phase evolution of a prenucleator (MoS 2 ) in all-solid-state lithium batteries (ASSLBs) for promoting fast Li nucleation and selective Li deposition. Yang et al. 202001191.

Batteries 186

Batteries Battery Universal Polymer 186

Green Car Congress

JULY 17, 2020

Funded through the US Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE), projects will conduct research in advanced batteries, electrification, and manufacturing in support of DOE’s Energy Storage Grand Challenge. Area of Interest (AOI) 01a: Lithium Ion Batteries using Silicon-based Anodes-Research.

Lithium Ion 236

Lithium Ion Vehicles Li-ion Universal 236

Green Car Congress

SEPTEMBER 16, 2016

million in funding to a team that includes 24M, Sepion Technologies , Berkeley Lab, and Carnegie Mellon University. The funds will be used to develop novel membranes and lithium-metal anodes for the next generation of high-energy-density, low-cost batteries. Those inactive materials are expensive and wasteful.

Li-ion 150

Li-ion Lithium Ion Energy Polymer 150

Green Car Congress

OCTOBER 9, 2014

The Global Climate and Energy Project (GCEP) at Stanford University has awarded $10.5 million for seven research projects designed to advance a broad range of renewable energy technologies, including solar cells, batteries, renewable fuels and bioenergy. Photo-electrochemically rechargeable zinc-air batteries.

Renewable 225

Renewable Solar Zinc Air Energy 225

Green Car Congress

NOVEMBER 16, 2018

Of those selected, approximately 43% of OPEN 2018 projects will be led by universities, 35% by small businesses, and the remainder by large businesses, non-profit organizations or federally funded research and development centers (FFRDCs). Novel Polymer-enhanced Rechargeable Aluminum-Alkaline Battery Technology – $2,000,000.

Engine 247

Engine San Diego Polymer Lithium Ion 247

Green Car Congress

APRIL 30, 2022

In 2021, Next Generation Manufacturing Canada (NGen) launched a call for proposals to support R&D projects for zero-emission vehicle (ZEV) manufacturing, systems, components, and batteries in Canada. The selected projects are: Advanced Manufacturing Process Innovations – Flex-Ion Battery Innovation Center. Lead: Ventra Group Co.;

Canada 304

Canada Li-ion Emissions Vehicles 304

Green Car Congress

AUGUST 21, 2014

High speed precision printing and UV curing for ceramic separators This project will develop the next generation of safer Lithium Ion PEV batteries by combining high speed precision printing and UV curing to instantly fixture ceramics on separator film. University of Colorado Boulder. University of Wisconsin - Madison.

Engine 231

Engine Carbon Fiber Fuel Batteries 231

Green Car Congress

JULY 12, 2017

million to 22 new cost-shared projects to accelerate the research of advanced battery, lightweight materials, engine emission control technologies, and energy efficient mobility systems (EEMS). University of Maryland: College Park. Research thick cathodes using freeze casting methods for solid-state lithium batteries.

Carbon Fiber 150

Carbon Fiber Li-ion Mercedes GM 150

Green Car Congress

MARCH 19, 2018

Rolls-Royce has signed a collaboration agreement with UK-based technology start-up Superdielectrics Ltd to explore the potential of using novel hydrophilic polymers to create next-generation high-energy storage technology. Existing supercapacitors on the market typically reach 0.3F/cm cm 2 depending upon complex extended surface electrodes.

Energy Storage 170

Energy Storage Energy Polymer Lithium Ion 170

Green Car Congress

MARCH 23, 2012

Grzegorz Milczarek from Poznan University of Technology (Poland), and Olle Inganäs from Linköping University (Sweden), have combined lignin derivatives, which are electronic insulators, with polypyrole, a conductive polymer, into an interpenetrating composite suitable for use as a battery cathode. Click to enlarge.

Polymer 268

Polymer Batteries Battery Renewable 268

Green Car Congress

SEPTEMBER 7, 2013

Kentucky Governor Steve Beshear announced that start-up lithium-sulfur battery company NOHMs (Nano Organic Hybrid Materials) Technologies Inc. has selected to locate its research, manufacturing and product development facility for military, cell phone and electric vehicle lithium-ion batteries in Lexington. Technology.

Lithium Sulfur 246

Lithium Sulfur Companies Kentucky Lithium Ion 246

Green Car Congress

DECEMBER 2, 2018

a developer of low-cost, high-performance polymers for electrochemical applications, announced its selection by the US Department of Energy’s Advanced Research Projects Agency-Energy (ARPA-E) for an award that will support the continued development of its alkaline exchange ionomers and membranes. 3) Perfluorinated polymers (i.e.,

Polymer 261

Polymer Fuel New York Hydrogen 261

Green Car Congress

FEBRUARY 15, 2013

Lithium sulfur batteries are of great interest due to their high specific energy and relatively low cost (e.g., However, Li-S batteries exhibit significant capacity decay over cycling. To overcome this mechanism, they introduced amphiphilic polymers to modify the carbon surface. Credit: ACS, Zheng et al.

Lithium Sulfur 334

Lithium Sulfur Batteries Battery Polymer 334

Green Car Congress

MAY 10, 2018

Purdue engineers have used upcycled low-density polyethylene (LDPE) plastic to boost the lifespan of lithium-sulfur batteries. When a PSC layer was utilized as an interlayer in lithium–sulfur batteries, the sulfur cathode delivered an improved capacity of 776 mAh g –1 at 0.5C with cycle retention of 79% over 200 cycles.

Lithium Sulfur 186

Lithium Sulfur Batteries Battery Engine 186

Green Car Congress

DECEMBER 31, 2012

Researchers at Cornell University are proposing a new scheme for cathodes for lithium-sulfide batteries ( earlier post ) to prevent lithium polysulfide dissolution and shuttling during electrochemical cycling. A fixed current density of 200 mA g -1 was used for these measurements. Credit: ACS, Guo et al. Click to enlarge. Earlier post.)

Li-ion 257

Li-ion Lithium Ion Batteries Battery 257

Green Car Congress

JANUARY 28, 2016

A team from Stanford University and the Department of Energy’s SLAC National Accelerator Laboratory has developed a new practical, high-energy-capacity lithium-ion battery anode out of silicon by encapsulating Si microparticles (∼1–3 µm) using conformally synthesized cages of multilayered graphene. Nature Energy ) Click to enlarge.

Li-ion 150

Li-ion Lithium Ion Energy Batteries 150

Green Car Congress

MARCH 22, 2012

These university-industry partnerships will receive almost $34 million in total project support. This project is led by Steven Holdcroft, Simon Fraser University, in partnership with Automotive Fuel Cell Corporation, Ballard Power Systems, Hyteon Inc., Batteries for grid energy storage and medical devices have similar requirements.

Canada 262

Canada Li-ion Fuel Batteries 262

Green Car Congress

NOVEMBER 22, 2011

optioned a PNNL-developed method for building titanium oxide and carbon structures that greatly improve the performance of lithium-ion batteries. The new material stores twice as much electricity at high charge/discharge rates as current lithium ion batteries, and creates increased battery capacity and a longer cycle life.

America 240

America Building Fuel Batteries 240

Green Car Congress

JUNE 4, 2013

Schematic illustration of 3D porous SiNP/conductive polymer hydrogel composite electrodes. Each SiNP is encapsulated in a conductive polymer surface. A team at Stanford University has developed stable silicon Li-ion battery anodes by incorporating a conducting polymer hydrogel into the Si-based material.

Li-ion 236

Li-ion Manufacturer Polymer Deep Cycle 236

Green Car Congress

OCTOBER 15, 2019

Researchers at the Department of Energy’s SLAC National Accelerator Laboratory and Stanford University have shown for the first time that a low-cost, non-precious metal cobalt phosphide (CoP) catalyst catalyst can split water and generate hydrogen gas for hours on end in the harsh environment of a commercial device.

Hydrogen 218

Hydrogen Commercial Polymer Connecticut 218

Green Car Congress

SEPTEMBER 28, 2015

By employing proprietary pretreatment and processing, researchers at Oak Ridge National Laboratory and Drexel University have produced flexible polymer carbon composite films from scrap tires for use as electrodes for supercapacitors. The first synthesized highly porous carbon (1625 m 2  g −1 ) using waste tires as the precursor.

Polymer 150

Polymer Waste Carbon Low Cost 150

Green Car Congress

SEPTEMBER 2, 2011

million) in grants to 16 collaborative research and development projects that focus on achieving significant cuts in CO 2 emissions for vehicle-centric technologies in low carbon vehicles. Technologies supported include ultra lightweight engine designs, advanced battery management systems and the next generation of electric motors.

Land Rover 240

Land Rover Carbon Aston Martin Vehicles 240

Green Car Congress

MAY 28, 2015

Of these, 16 are vehicle-related, encompassing projects developing batteries, power electronics and improved combustion engine technology including on-board reformers, and two are specifically hydrogen fuel cell-related. High Loading Lithium-Ion Electrode Architecture for Low Cost Electric Vehicle Batteries Ballast Energy, Inc.

Li-ion 150

Li-ion Battery Powered Engine Lithium Ion 150

Green Car Congress

APRIL 4, 2019

Topic areas for this funding opportunity include the following: Topic 1: Solid State Batteries - Materials, Diagnostic Tools, and Modeling (up to $12.5 Covetic/Printed Steel – There is a need for low-cost, high-efficiency steels to achieve low-cost and high power density electric motors.

Vehicles 252

Vehicles Fuel Economy Alternative Fuels Motor 252

Green Car Congress

MARCH 21, 2018

Researchers at Shanghai Jiao Tong University (SJTU) have developed a polymer binder—PAA-P(HEA-co-DMA)—for use with silicon microparticle (SiMP) anodes. Its network structure and special self-healing capability not only provides enough mechanical support but also buffers the strain caused by the volume change of SiMPs.

Deep Cycle 150

Deep Cycle Polymer Li-ion Water 150

Green Car Congress

AUGUST 1, 2010

The Batteries for Advanced Transportation Technologies (BATT) Program is awarding more than $8 million to eight R&D projects on lithium battery anodes. These projects focus on developing next-generation anodes to increase the energy and decrease the cost of lithium batteries while maintaining safety and cycle life.

Li-ion 186

Li-ion Batteries Battery Lithium Ion 186

Green Car Congress

FEBRUARY 12, 2018

These low density steels are expected to generate energy savings by bringing efficiencies in the steel manufacturing and lifetime savings by use of lightweight steel in automotive structural applications. Board of Trustees of the University of Illinois. Colorado State University. Iowa State University.

Manufacturer 150

Manufacturer Waste Universal Dallas 150

Green Car Congress

JUNE 19, 2014

The US Department of Energy (DOE) has six recently launched applied battery research (ABR) projects as part of its Vehicle Technologies portfolio. The Argonne team is currently engineering anodes based on 50 wt% SiO-50 wt% Sn 30 Co 30 C 40 and a conductive polymer binder (PFFOMB). Penn State/University of Texas at Austin.

Li-ion 316

Li-ion PHEV Ni-Li Batteries 316

Green Car Congress

DECEMBER 28, 2012

Carbon is seen as an attractive potential cathode material for aprotic (non-aqueous) Lithium-air batteries, which are themselves of great interest for applications such as in electric vehicles because of the cells’ high theoretical specific energy. A team at the University of St. O2 battery. Andrews (Scotland) led by Prof.

Carbon 240

Carbon Li-ion Batteries Battery 240

Green Car Congress

APRIL 1, 2011

Example of a lithium-water rechargeable battery. Researchers at the University of Texas, including Dr. John Goodenough, are proposing a strategy for high-capacity next-generation alkali (lithium or sodium)-ion batteries using water-soluble redox couples as the cathode. The present sodium-sulfur battery operates above 300 °C.

Sodium 218

Sodium Water Li-ion Texas 218

Green Car Congress

AUGUST 16, 2016

million through the Advanced Vehicle Power Technology Alliance to support projects specifically focused on advanced high-voltage electrolytes for batteries and advanced engine and powertrain technologies to improve vehicle fuel efficiency. Accelerated Development and Deployment of Low‐Cost Automotive Mg Sheet Components (Area of Interest 3).

Vehicles 150

Vehicles Plug-in Lithium Ion Universal 150

Green Car Congress

NOVEMBER 2, 2011

A team from Lawrence Berkeley National Laboratory and Tsinghua University (China) have synthesized graphene oxide-sulfur (GO-S) nanocomposite cathodes and applied them in lithium/sulfur cells to show a high reversible capacity of 950-1400 mAh g -1 and stable cycling for more than 50 deep cycles at 0.1C (1C = 1675 mA g -1 ). Click to enlarge.

Lithium Sulfur 186

Lithium Sulfur Li-ion Batteries Battery 186

Green Car Congress

JUNE 1, 2015

Stanford University scientists have created a new ultrahigh surface area three-dimensional porous graphitic carbon material that significantly boosts the performance of energy-storage technologies. The process begins with conducting hydrogel, a water-based polymer with a spongy texture similar to soft contact lenses.

Energy Storage 150

Energy Storage Carbon Lithium Sulfur Energy 150

Green Car Congress

OCTOBER 10, 2011

The California Energy Commission has awarded $1,585,490 to spur research on projects including a solid-state Li-ion battery system for grid-scale energy storage. to develop and test a 25 kWh prototype battery system based on nanostructured polymer electrolytes. Commissioners approved $600,000 to Seeo Inc. Earlier post.).

Li-ion 186

Li-ion Grid Energy California 186

Green Car Congress

APRIL 30, 2010

The second round was focused specifically on three areas of technology representing new approaches for advanced microbial biofuels (electrofuels); much higher capacity and less expensive batteries for electric vehicles; and carbon capture. NC State University. Medical University of South Carolina. Columbia University.

Carbon 249

Carbon Batteries Battery Li-ion 249