Green Car Congress

JUNE 15, 2015

Researchers led by a team from Griffith University in Australia have developed a multifunctional polymer binder that not only maintains the outstanding binding capabilities of sodium alginate but also enhances the mechanical integrity and lithium-ion diffusion coefficient in a LiFePO 4 (LFP) electrode during the operation of the batteries.

Li-ion 150

Li-ion Polymer Lithium Ion Sodium 150

Green Car Congress

MARCH 1, 2022

a developer of lithium metal anode and lithium metal technologies, has signed a Joint Development and Commercialization Agreement (JD/CA) with Bolloré subsidiary Blue Solutions, the largest producer of solid-state lithium metal batteries. Li-Metal Corp., —Maciej Jastrzebski, Li-Metal co-founder and CEO.

Molten Salt 170

Molten Salt Commercial Batteries Battery 170

Green Car Congress

JANUARY 7, 2015

A team from the University of Rome Sapienza has developed a rechargeable lithium-ion polymer battery based on the combination of a high capacity sulfur-carbon cathode, nanostructured Li x Sn-C anode and polysulfide-added PEO-based gel membrane. mAh g S -1 , depending on the cycling rate. —Agostini & Hassoun (2015).

Li-ion 150

Li-ion Polymer Lithium Sulfur Energy 150

Green Car Congress

DECEMBER 13, 2016

John Goodenough, known around the world for his pioneering work that led to the invention of the rechargeable lithium-ion battery, have devised a new strategy for a safe, low-cost, all-solid-state rechargeable sodium or lithium battery cell that has the required energy density and cycle life for a battery that powers an all-electric road vehicle.

Low Cost 150

Low Cost Recharge Austin Li-ion 150

Green Car Congress

SEPTEMBER 1, 2023

Eos Z3 battery module Z3 battery modules store electrical energy through zinc deposition. The streamlined Eos Z3 battery module design features an aqueous electrolyte, bipolar electrodes, and a polymer casing. Conductive plastic anodes (-) and carbon-felt cathodes (+) make up the Z3 electrodes.

Energy Storage 195

Energy Storage Energy Legal Polymer 195

Green Car Congress

SEPTEMBER 23, 2011

At left, a traditional approach combines Si (blue spheres) with a polymer binder (light brown) plus carbon (dark brown spheres). Repeated swelling and shrinking eventually breaks contacts among the conducting carbon particles. Composite anodes based on this polymer and commercial Si particles exhibit 2,100 mAh g ?1

Polymer 199

Polymer Li-ion Lithium Ion Batteries 199

Green Car Congress

FEBRUARY 15, 2013

Electrochemical performance of the modified hollow carbon nanofiber cathode. (a) Lithium sulfur batteries are of great interest due to their high specific energy and relatively low cost (e.g., Lithium sulfur batteries are of great interest due to their high specific energy and relatively low cost (e.g.,

Lithium Sulfur 334

Lithium Sulfur Batteries Battery Polymer 334

Green Car Congress

MAY 10, 2018

Purdue engineers have used upcycled low-density polyethylene (LDPE) plastic to boost the lifespan of lithium-sulfur batteries. They first prepared porous sulfonated carbon (PSC) from LDPE plastic via microwave-promoted sulfonation. with cycle retention of 79% over 200 cycles.

Lithium Sulfur 186

Lithium Sulfur Batteries Battery Engine 186

Green Car Congress

JANUARY 24, 2014

EnerG2, a company manufacturing advanced nano-structured materials for next-generation energy storage, has introduced a carbon and silicon composite to boost lithium-ion battery capacity and power performance. The company says that it is working both with battery customers and silicon manufacturers. Earlier post.).

Li-ion 236

Li-ion Carbon Lithium Ion Energy Storage 236

Green Car Congress

OCTOBER 9, 2014

million for seven research projects designed to advance a broad range of renewable energy technologies, including solar cells, batteries, renewable fuels and bioenergy. The goal is to develop high-energy, durable lithium-ion batteries for electric vehicles by improving the cycle life of the battery electrodes.

Renewable 225

Renewable Solar Zinc Air Energy 225

Green Car Congress

JUNE 1, 2015

Stanford University scientists have created a new ultrahigh surface area three-dimensional porous graphitic carbon material that significantly boosts the performance of energy-storage technologies. The maximum surface area achieved with conventional activated carbon is about 3,000 m 2 g –1. cm –3 ), and hierarchical pore architecture.

Energy Storage 150

Energy Storage Carbon Lithium Sulfur Energy 150

Green Car Congress

DECEMBER 28, 2012

Carbon is seen as an attractive potential cathode material for aprotic (non-aqueous) Lithium-air batteries, which are themselves of great interest for applications such as in electric vehicles because of the cells’ high theoretical specific energy. Given the role of carbon as a possible porous positive electrode for nonaqueous Li?O

Carbon 240

Carbon Li-ion Batteries Battery 240

Green Car Congress

DECEMBER 31, 2012

Researchers at Cornell University are proposing a new scheme for cathodes for lithium-sulfide batteries ( earlier post ) to prevent lithium polysulfide dissolution and shuttling during electrochemical cycling. Earlier post.) Earlier post.). Earlier post.). —Guo et al.

Li-ion 257

Li-ion Lithium Ion Batteries Battery 257

Green Car Congress

SEPTEMBER 7, 2013

Kentucky Governor Steve Beshear announced that start-up lithium-sulfur battery company NOHMs (Nano Organic Hybrid Materials) Technologies Inc. has selected to locate its research, manufacturing and product development facility for military, cell phone and electric vehicle lithium-ion batteries in Lexington. Technology.

Lithium Sulfur 246

Lithium Sulfur Companies Kentucky Lithium Ion 246

Green Car Congress

APRIL 30, 2022

In 2021, Next Generation Manufacturing Canada (NGen) launched a call for proposals to support R&D projects for zero-emission vehicle (ZEV) manufacturing, systems, components, and batteries in Canada. The selected projects are: Advanced Manufacturing Process Innovations – Flex-Ion Battery Innovation Center. Lead: Ventra Group Co.;

Canada 304

Canada Li-ion Emissions Vehicles 304

Green Car Congress

MARCH 23, 2012

Grzegorz Milczarek from Poznan University of Technology (Poland), and Olle Inganäs from Linköping University (Sweden), have combined lignin derivatives, which are electronic insulators, with polypyrole, a conductive polymer, into an interpenetrating composite suitable for use as a battery cathode. —Milczarek and Inganäs.

Polymer 268

Polymer Batteries Battery Renewable 268

Green Car Congress

AUGUST 21, 2014

High speed precision printing and UV curing for ceramic separators This project will develop the next generation of safer Lithium Ion PEV batteries by combining high speed precision printing and UV curing to instantly fixture ceramics on separator film. Batteries Engines Materials Motors Power Electronics' Miltec UV International, LLC.

Engine 231

Engine Carbon Fiber Fuel Batteries 231

Green Car Congress

NOVEMBER 16, 2018

If successful, the proposed technology will offer light- and heavy-duty vehicle manufacturers a cost-effective solution to improve vehicle fuel efficiency and reduce transportation carbon dioxide (CO 2 ) emissions. Ecolectro is developing alkaline exchange ionomers (AEIs) to enable low-cost fuel cell and electrolyzer technologies.

Engine 247

Engine San Diego Polymer Lithium Ion 247

Green Car Congress

JULY 12, 2017

million to 22 new cost-shared projects to accelerate the research of advanced battery, lightweight materials, engine emission control technologies, and energy efficient mobility systems (EEMS). Research innovative iron-based materials for high energy cathodes for high energy lithium ion battery technologies. General Motors LLC.

Carbon Fiber 150

Carbon Fiber Li-ion Mercedes GM 150

Green Car Congress

MAY 16, 2016

Researchers from Hunan University and Changsha University in China have designed 3D hierarchical porous nitrogen-doped aligned carbon nanotubes (HPNACNTs) with well-directed 1D conductive electron paths as scaffold to load sulfur for use as a high-performance cathode in Li-S batteries.

Carbon 150

Carbon Li-ion Lithium Sulfur Transportation 150

Green Car Congress

SEPTEMBER 2, 2011

million) in grants to 16 collaborative research and development projects that focus on achieving significant cuts in CO 2 emissions for vehicle-centric technologies in low carbon vehicles. Technologies supported include ultra lightweight engine designs, advanced battery management systems and the next generation of electric motors.

Land Rover 240

Land Rover Carbon Aston Martin Vehicles 240

Green Car Congress

APRIL 30, 2010

ARPA-E’s first solicitation awarded $151 million to 37 projects aimed at transformational innovations in energy storage, biofuels, carbon capture, renewable power, building efficiency, vehicles, and other areas. Novel Biological Conversion of Hydrogen and Carbon Dioxide Directly into Biodiesel. Earlier post.) Engineering E. per gallon.

Carbon 249

Carbon Batteries Battery Li-ion 249

Green Car Congress

JANUARY 18, 2014

VTO is seeking projects that address the major challenges to developing and commercializing batteries for plug?in As described in multiple DOE reports, the main barriers to widespread PEV commercialization are the cost; performance and life; and abuse tolerance of high?energy energy batteries. in electric vehicles (PEVs).

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

SEPTEMBER 28, 2015

By employing proprietary pretreatment and processing, researchers at Oak Ridge National Laboratory and Drexel University have produced flexible polymer carbon composite films from scrap tires for use as electrodes for supercapacitors. The first synthesized highly porous carbon (1625 m 2  g −1 ) using waste tires as the precursor.

Polymer 150

Polymer Waste Carbon Low Cost 150

Green Car Congress

SEPTEMBER 17, 2012

The Precourt Institute for Energy, the umbrella organization for energy research and education at Stanford, will fund the following four studies: Nanostructured Polymers for High-Performance Batteries. The goal is to produce stable, high-capacity lithium-ion batteries and eventually develop novel all-polymer batteries at scale.

Energy 239

Energy Vehicles Power Powered 239

Green Car Congress

MAY 19, 2018

Nextgen Battery Technologies: High-Density Hydrogen Storage in Space-Filling Polyhedral Sorbents. AvCarb Material Solutions, LLC: Development of Innovative Gas Diffusion Layers for Polymer Electrolyte Membrane Fuel Cells. To demonstrate a low-cost fuel cell technology. pH Matter, LLC: High Performance Gas Diffusion Layer.

Hydrogen 199

Hydrogen Fuel Low Cost Polymer 199

Green Car Congress

MAY 25, 2017

This proposal aims to solve these problems by converting organic waste into chemicals with widespread use in polymer and transportation industries. This project focuses on the development and US manufacturing of a new battery membrane that enables low-cost and long-lived Li-ion batteries. Trash2Cash-Energy LLC.

Grant 150

Grant Li-ion Waste Lithium Sulfur 150

Green Car Congress

JUNE 19, 2014

The US Department of Energy (DOE) has six recently launched applied battery research (ABR) projects as part of its Vehicle Technologies portfolio. The Argonne team is currently engineering anodes based on 50 wt% SiO-50 wt% Sn 30 Co 30 C 40 and a conductive polymer binder (PFFOMB). TIAX is the sole organization in a $2.2-million

Li-ion 316

Li-ion PHEV Ni-Li Batteries 316

Green Car Congress

NOVEMBER 22, 2011

optioned a PNNL-developed method for building titanium oxide and carbon structures that greatly improve the performance of lithium-ion batteries. The new material stores twice as much electricity at high charge/discharge rates as current lithium ion batteries, and creates increased battery capacity and a longer cycle life.

America 240

America Building Fuel Batteries 240

Green Car Congress

DECEMBER 13, 2019

This FOA may include the following topics: Lithium-ion batteries using silicon-based anode. Low-cost electric traction drive systems using no heavy rare earth materials. Lightweight and high-performance fiber-reinforced polymer composites for vehicle applications. DOE plans to issue the FOA in January/February 2020.

2020 186

2020 Vehicles Polymer Gasoline-Electric 186

Green Car Congress

MAY 28, 2015

Of these, 16 are vehicle-related, encompassing projects developing batteries, power electronics and improved combustion engine technology including on-board reformers, and two are specifically hydrogen fuel cell-related. High Loading Lithium-Ion Electrode Architecture for Low Cost Electric Vehicle Batteries Ballast Energy, Inc.

Li-ion 150

Li-ion Battery Powered Engine Lithium Ion 150

Green Car Congress

MAY 2, 2017

Li-sulfur batteries are looked to as a likely next-generation higher energy density energy storage system due to the high theoretical capacity, low cost and high earth abundance of sulfur. A paper on their work is published in the ACS journal Nano Letters. Credit: ACS, Chen et al. — Chen et al. 7b00417.

Li-ion 150

Li-ion Lithium Sulfur Polymer Energy Storage 150

Green Car Congress

OCTOBER 15, 2019

Researchers at the Department of Energy’s SLAC National Accelerator Laboratory and Stanford University have shown for the first time that a low-cost, non-precious metal cobalt phosphide (CoP) catalyst catalyst can split water and generate hydrogen gas for hours on end in the harsh environment of a commercial device.

Hydrogen 218

Hydrogen Commercial Polymer Connecticut 218

Green Car Congress

APRIL 2, 2013

Lithium-sulfur batteries are of great interest for electromobility applications, among others, due to their high specific energy and relatively low cost, but are challenged by significant capacity decay over cycling. Because the CNT electrode contains no polymer binder, the volume change of the active material (S 8 ?

Lithium Sulfur 255

Lithium Sulfur Honolulu Li-ion 2012 255

Green Car Congress

DECEMBER 9, 2014

Technical topics for this FOA—which span the range of DOE interests from fossil to nuclear to renewable and low-carbon energies—include two hydrogen- and fuel-cell-related topics: fuel cell-battery electric hybrid trucks and in-line quality control devices for polymer electrolyte membrane (PEM) fuel cells.

2015 218

2015 Hydrogen Fuel Batteries 218

Green Car Congress

NOVEMBER 2, 2011

This approach enabled them to obtain a uniform and thin (around tens of nanometers) sulfur coating on graphene oxide sheets and address some of the challenges retarding the commercialization of Li/S batteries. However, there are a number of challenges in Li/S batteries, Ji et al. Earlier post.). —Ji et al.

Lithium Sulfur 186

Lithium Sulfur Li-ion Batteries Battery 186

Green Car Congress

AUGUST 1, 2010

The Batteries for Advanced Transportation Technologies (BATT) Program is awarding more than $8 million to eight R&D projects on lithium battery anodes. BATT is funded by the Department of Energy’s Office of Vehicle Technologies and is managed by the Lawrence Berkeley National Laboratory as part of its Carbon Cycle 2.0

Li-ion 186

Li-ion Batteries Battery Lithium Ion 186