Remove Conversion Remove Convert Remove Demo Remove Water
article thumbnail

PNNL biocrude-to-diesel demo passes 2,000-hour catalyst stability milestone

Green Car Congress

A large-scale demonstration converting biocrude to renewable diesel fuel has passed a significant test, operating for more than 2,000 hours continuously without losing effectiveness. It addresses the need to convert biocrude, a mixture of carbon-based polymers, into biofuels. Biowaste to biofuel conversion process.

Diesel 332
article thumbnail

US researchers demo separation-free, IL-based process for conversion of biomass to advanced biofuel

Green Car Congress

Researchers from three US national labs (Berkeley, Pacific Northwest and Sandia) has demonstrated a separation-free, ionic-liquid (IL)-based process to convert biomass to an advanced biofuel (the sesquiterpene bisabolene). They achieved high titers of bisabolene relative to those previously obtained using a multi-step process.

article thumbnail

Soletair demo plant produces renewable hydrocarbon fuel from CO2 captured from the air

Green Car Congress

VTT Technical Research Centre of Finland and Lappeenranta University of Technology (LUT) are beginning testing of the Soletair demo plant, which uses air-captured carbon dioxide to produce renewable fuels and chemicals. Proton exchange membrane (PEM) water electrolysis is used for hydrogen production. Phase 1: Renewable energy.

Renewable 244
article thumbnail

Audi in new e-fuels project: synthetic diesel from water, air-captured CO2 and green electricity; “Blue Crude”

Green Car Congress

Audi’s latest e-fuels project is participation in a a pilot plant project in Dresden that produces diesel fuel from water, CO 2 and green electricity. The sunfire plant, which operates according to the “power-to-liquid” (PtL) principle, requires carbon dioxide, water and electricity as raw materials. PtL = Power-to-Liquids.

Audi 400
article thumbnail

Siluria Technologies announces successful start-up of first demo plant directly converting natural gas to ethylene through OCM

Green Car Congress

Siluria’s OCM technology is the first commercially viable process to directly convert natural gas to ethylene, a key building block for the global petrochemicals industry and a new basis from which to produce transportation fuels. The oxidative coupling of methane (OCM) converts methane into ethane and ethylene (C 2 hydrocarbons).

Convert 150
article thumbnail

SwRI D-EGR gasoline demo vehicle delivers diesel efficiency at lower cost; potential for LEV III/Tier 3 emissions

Green Car Congress

The D-EGR demonstrator is a converted 2012 Buick Regal with a 2.0-liter In their paper, the SwRI researchers reported that the conversion to D-EGR improved engine efficiency and fuel consumption at least 10% across the performance map, with some operating conditions seeing substantially higher improvements. The engine conversion.

Gasoline 317
article thumbnail

United announces investment in, commercial agreement with Dimensional Energy; CO2-to-SAF

Green Car Congress

million award from ARPA-E ( earlier post ), has developed a reactor and catalysts to convert CO 2 and hydrogen from water into syngas for use in the Fischer-Tropsch process. The company began construction on a CO 2 -to-fuels demo in Tucson, Arizona in 2021. Dimensional Energy, which recently received a $3.1-million