Green Car Congress

SEPTEMBER 10, 2018

Farasis Energy, a global developer and manufacturer of lithium-ion cells, modules and large battery systems, recently completed C-round financing exceeding 1 Billion US dollars. Since 2017 Farasis has regularly ranked first in terms of shipments of NCM-based Li-ion pouch cells to the Chinese automotive market.

Li-ion 239

Li-ion Manufacturer Global Batteries 239

Green Car Congress

DECEMBER 21, 2018

is funding a research consortium with the University of British Columbia (UBC) to develop a low-cost and scalable method for fabricating silicon-based anodes to improve the energy density of Li-ion batteries. Fabrication and evaluation of Si-based anode for Li-ion batteries. Canada-based MGX Minerals Inc.

Li-ion 191

Li-ion Universal Energy Batteries 191

Green Car Congress

JANUARY 11, 2023

ARPA-E selected the following 12 teams from universities, national laboratories and the private sector to address and remove key technology barriers to EV adoption by developing next-generation battery technologies: 24M Technologies will develop low-cost and fast-charging sodium metal batteries with good low-temperature performance for EVs.

Li-ion 256

Li-ion Batteries Battery Sodium 256

Green Car Congress

MAY 21, 2016

Prieto Battery, a company commercializing a 3D Lithium-ion battery technology ( earlier post ), announced a strategic investment from Stanley Ventures, the newly-formed venture arm of Stanley Black & Decker, a world-leading provider of tools and storage, commercial electronic security and engineered fastening systems.

Li-ion 199

Li-ion Commercial Batteries Battery 199

Green Car Congress

MARCH 27, 2023

Researchers from the Korea Electrotechnology Research Institute (KERI) and Kumoh National Institute of Technology (KIT), have developed a low-cost production technology for silicon disulfide (SiS 2 ) for solid-state electrolytes (argyrodite-type) that has potential to accelerate the commercialization of all-solid-state batteries (ASSBs).

Li-ion 243

Li-ion Production Batteries Battery 243

Green Car Congress

JANUARY 20, 2017

The process could significantly lower the cost of producing the one-dimensional (1D) nanostructures, enabling a broad range of uses in lightweight structural composites, advanced sensors, electronic devices—and thermally-stable and strong battery membranes able to withstand temperatures of more than 1,000 ˚C. —Gleb Yushin.

Low Cost 150

Low Cost Georgia Li-ion Batteries 150

Green Car Congress

DECEMBER 9, 2021

The contract award, which includes a 75% cost-share, funds a 30-month project that began in October 2021. The program’s focus is to demonstrate that battery-grade metals can be manufactured from recycled materials at lower cost, lower environmental impact, and with higher domestic US sourced content than conventional virgin sourced metals.

Li-ion 243

Li-ion Lithium Ion Batteries Battery 243

Green Car Congress

APRIL 13, 2020

Researchers in Europe, with colleagues from Samsung R&D Institute in Japan, have developed a highly stable Fe 3 O 4 /C composite for use as a conversion electrode in all-solid-state Li-ion batteries. In addition, recently a new chemistry has surfaced, allowing to store more Li + by the so-called conversion mechanism. Resources.

Li-ion 170

Li-ion Conversion Carbon Fiber Batteries 170

Green Car Congress

FEBRUARY 26, 2019

24M announced that it has developed and delivered commercially-viable, high energy density lithium-ion cells. These deliveries represent a significant milestone in the 24M mission to scale its unique, capital-efficient, low-cost approach to advanced lithium-ion battery manufacturing.

Li-ion 207

Li-ion Lithium Ion Commercial Energy 207

Green Car Congress

JULY 24, 2020

Advancing cathode materials with both high energy density and low cost have always been the main objective of battery material research. It should be noted, the cost and sustainability of lithium-ion batteries are not only limited by the production of Co and Ni but also potentially limited by the lithium element itself. …

Ni-Li 307

Ni-Li Li-ion San Diego Energy Storage 307

Green Car Congress

MAY 1, 2018

Researchers at the Ningbo Institute of Materials Technology & Engineering in China have developed new hybrid electrolytes to support high-voltage Li-ion batteries (e.g., ~5 O 4 /Li batteries are improved by using the hybrid electrolytes. The result combines the merits of both solid and liquid electrolytes.

Li-ion 199

Li-ion Hybrid Batteries Battery 199

Green Car Congress

MARCH 2, 2023

The new battery design could help ease integration of renewable energy into the electrical grid at lower cost, using Earth-abundant metals, according to a study just published in Energy Storage Materials. h is achieved with an estimated raw active materials cost of $7.02 The team previously reported a neutral molten salt reaction.

Molten Salt 396

Molten Salt Grid Design Sodium 396

Green Car Congress

APRIL 23, 2017

Researchers at the University of California, Riverside’s Bourns College of Engineering have used waste glass bottles and a low-cost chemical process to fabricate nanosilicon anodes for high-performance lithium-ion batteries. The UCR Office of Technology Commercialization has filed a patent application for the inventions above.

Li-ion 150

Li-ion Waste Lithium Ion Batteries 150

Green Car Congress

OCTOBER 20, 2022

Anovion, with its partners, collaborators and stakeholders, will build 35,000 tons per annum of new synthetic graphite anode material capacity for lithium-ion batteries used in electric vehicles and critical energy storage applications. Li 2 O spodumene concentrate. Materials Separation & Processing (Cathode Minerals).

Parts 459

Parts Batteries Battery Lithium Ion 459

Green Car Congress

DECEMBER 18, 2014

O 2 (Li 1.2 1 of a commercialized cell of graphite/LiCoO 2 as well as an excellent cycling stability. Proposed interfacial reaction and SEI formation mechanisms of the Li 1.2 V vs. Li/Li + , which can provide enhanced energy density compared to ?136 1 by LiCoO 2 in a commercial battery. 278 Wh kg ?1

Li-ion 329

Li-ion Ni-Li Energy Lithium Ion 329

Green Car Congress

NOVEMBER 28, 2021

Solvay Ventures, the venture capital fund of Solvay, invested in Sepion, a California-based start-up that specializes in advanced membranes for batteries with Li-metal anodes and liquid electrolytes. Sepion raised funds to accelerate commercialization of lithium metal batteries for long-range and low-cost electric vehicles.

Li-ion 259

Li-ion Batteries Battery Companies 259

Green Car Congress

FEBRUARY 16, 2023

This marks a first-of-its-kind manufacturing achievement and is an important step towards Sakuu’s planned commercial-scale production of next-generation SwiftPrint batteries, including solid-state batteries, from its Kavian platform in gigafactories worldwide, the company said.

Batteries 418

Batteries Battery Li-ion Lithium Ion 418

Green Car Congress

JANUARY 24, 2013

The new round will help fund productization and commercialization of Leyden Energy’s next-generation battery chemistries, built on research and development (R&D) advancements in both silicon anode (Si-anode) technology for mobile consumer electronics applications and advanced lithium ion (Li-ion) chemistry for start-stop automotive applications.

Li-ion 240

Li-ion Financing Energy Batteries 240

Green Car Congress

MARCH 6, 2012

While Envia Systems is the first integrated cell producer to announce success with that type of combination, other providers of Si-C materials or IP—such as, but not limited to, Nanosys and the DOE’s own Argonne National Laboratory, respectively—are also currently deep in the process of development and/or commercialization.

Li-ion 286

Li-ion Ni-Li Commercial Energy 286

Green Car Congress

MARCH 19, 2014

The nanocrystals possess high and similar Li-ion and Na-ion charge storage capacities of 580?640 85% of the low-rate value, indicating that rate capability of Sb nanostructures can be comparable to the best Li-ion intercalation anodes and is so far unprecedented for Na-ion storage. 640 mAh g ?1

Li-ion 220

Li-ion Sodium Batteries Battery 220

Green Car Congress

JUNE 24, 2020

The project will result in a unique battery system that features superior energy density, low cost, increased cycles and reduced critical materials. The proposed Li-ion battery technology will be demonstrated at TRL6 (battery pack) and validated on an automotive EV testbed. Pack 3C fast charging capability.

Batteries 360

Batteries Battery Li-ion 2000 360

Green Car Congress

AUGUST 26, 2021

Researchers at Chalmers University of Technology, Sweden, have developed a nanometric graphite-like anode for sodium ion (Na + storage), formed by stacked graphene sheets functionalized only on one side, termed Janus graphene. Na is comparable to graphite for standard lithium ion batteries. The estimated sodium storage up to C 6.9

Sodium 493

Sodium Li-ion Lithium Ion Batteries 493

Green Car Congress

MARCH 10, 2021

A new fabrication technique could allow all-solid-state automotive lithium-ion batteries (ASSLBs) to adopt nonflammable ceramic electrolytes using the same production processes as in batteries made with conventional liquid electrolytes. O 2 cathodes and both Li 4 Ti 5 O 12 and graphite anodes. —Kostiantyn Turcheniuk, co-author.

Georgia 312

Georgia Li-ion Batteries Battery 312

Green Car Congress

AUGUST 20, 2012

developer of a low-cost hybrid electric powertrain designed specifically for class 1 to 3 commercial fleet use ( earlier post ), signed a one-year supply agreement with Johnson Controls, Inc. kWh Li-ion packs for use in XL’s aftermarket hybrid conversion system. XL Hybrids, Inc.,

Li-ion 247

Li-ion Hybrid Supplies Commercial 247

Green Car Congress

APRIL 30, 2022

The selected projects are: Advanced Manufacturing Process Innovations – Flex-Ion Battery Innovation Center. The Flex-Ion Battery Innovation Center, a division of Ventra Group Co., will establish a center of excellence for advanced Li-Ion battery manufacturing, in collaboration with partner eCAMION. Lead: Ventra Group Co.;

Canada 304

Canada Li-ion Emissions Vehicles 304

Green Car Congress

APRIL 3, 2021

Hercules recently completed an agreement with Prieto Battery ( earlier post )—developer of a 3D solid-state Li-ion rechargeable battery—to co-develop and commercialize solid-state batteries for production in North America. How Prieto 3D batteries work. Source: Prieto.

Li-ion 365

Li-ion Batteries Battery Lithium Ion 365

Green Car Congress

JANUARY 13, 2021

The goal of the program is to translate the performance achieved at the lab- and bench-scale by previously funded ARPA-E technologies to commercial viability, supporting promising energy technologies that require scaling-up or pre-pilot projects to enable a path to market and ultimately lead to realized commercial impact.

Li-ion 199

Li-ion Batteries Battery Polymer 199

Green Car Congress

JULY 6, 2016

Materials researchers at the Swiss Paul Scherrer Institute PSI in Villigen and the ETH Zurich have developed a very simple and cost-effective procedure for significantly enhancing the performance of conventional Li-ion rechargeable batteries by improving only the design of the electrodes without changing the underlying materials chemistry.

Li-ion 170

Li-ion Batteries Battery Lithium Ion 170

Green Car Congress

JANUARY 1, 2014

Researchers from Shanghai University have synthesized Fe 2 O 3 -graphene sheet-on-sheet sandwich-like nanocomposites that, when used as an anode for Li-ion battery, shows a high reversible capacity of 662.4 These metal oxides electrodes have shown much higher Li-ion storage capacities than that of commercial graphite anodes.

Li-ion 240

Li-ion Batteries Battery Carbon 240

Green Car Congress

OCTOBER 15, 2012

As part of the FY 2012 Phase I Release 3 SBIR/STTR Award program, the US Department of Energy (DOE) has awarded Michigan-based XG Sciences, a manufacturer of graphene nanoplatelets ( earlier post ), a contract to develop low-cost, high-energy Si/graphene anodes for Li-ion batteries for use in extended range electric vehicle applications.

Li-ion 218

Li-ion Energy Storage Batteries Battery 218

Green Car Congress

JANUARY 21, 2021

Critical materials are used in many products important to the US economy and energy technologies, such as rare-earth elements used to manufacture high-strength magnets for offshore wind-turbine generators and lithium and cobalt in lithium-ion batteries for electric vehicles. Next-Generation Extraction, Separation, and Processing Technologies.

Li-ion 321

Li-ion Wyoming Lithium Ion Corporation 321

Green Car Congress

NOVEMBER 22, 2013

Low-cost 14V micro hybrid systems and full (strong) hybrid (i.e., Although NiMH is still the dominant battery in the high-voltage hybrid market, Li-ion technology started to take market share around 2009 and is expected to continually increase its share with time. Li-Ion batteries for strong hybrids are in short supply.

Li-ion 265

Li-ion Hybrid NiMH Batteries 265

Green Car Congress

JANUARY 24, 2014

EnerG2, a company manufacturing advanced nano-structured materials for next-generation energy storage, has introduced a carbon and silicon composite to boost lithium-ion battery capacity and power performance. The composite material has been scaled for commercial manufacturing. Earlier post.).

Li-ion 236

Li-ion Carbon Lithium Ion Energy Storage 236

Green Car Congress

JANUARY 28, 2016

A team from Stanford University and the Department of Energy’s SLAC National Accelerator Laboratory has developed a new practical, high-energy-capacity lithium-ion battery anode out of silicon by encapsulating Si microparticles (∼1–3 µm) using conformally synthesized cages of multilayered graphene. Nature Energy ) Click to enlarge.

Li-ion 150

Li-ion Lithium Ion Energy Batteries 150

Green Car Congress

JANUARY 9, 2020

The contract award, which includes a 50% cost share, funds an 18-month project that began last year. The program will evaluate PSI cells against electric vehicle requirements to determine whether its active material coating technology improves cell level energy density and lowers cell cost.

Li-ion 170

Li-ion Lithium Ion General Motors United States 170

Green Car Congress

APRIL 10, 2012

million lithium-ion battery technology development contract to Johnson Controls Inc. USABC awarded the contract to continue Johnson Controls’ development of lithium-ion battery technology for plug-in hybrid electric vehicle (PHEV) applications to meet USABC goals for low-cost, long-life, high-power and high energy vehicle systems.

Li-ion 240

Li-ion PHEV Lithium Ion Milwaukee 240

Green Car Congress

JANUARY 15, 2020

Enevate, a developer of advanced silicon-dominant Li-ion battery technology capable of extreme fast charging for electric vehicles (EVs), announced its new fourth-generation technology optimized for high volume commercialization and manufacturing at gigafactory scale.

Li-ion 247

Li-ion Batteries Battery Production 247