Green Car Congress

OCTOBER 31, 2013

The FOA includes the following topics: Topic Area 1: Reducing the cost of compressed hydrogen storage systems. 350 to 700 bar) storage vessels are constructed using expensive high-strength carbon fiber. develop novel, advanced hydrogen storage technologies. Currently, high-pressure (i.e.,

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

AUGUST 21, 2015

Stuart Licht at The George Washington University in Washington, DC has developed a low-cost, high-yield and scalable process for the electrolytic conversion of atmospheric CO 2 dissolved in molten carbonates into carbon nanofibers (CNFs.) —Ren et al. —Stuart Licht.

Low Cost 150

Low Cost Carbon Li-ion Carbon Fiber 150

Green Car Congress

MAY 5, 2020

Rachel Meidl, the fellow in energy and environment at the institute’s Center for Energy Studies, and Emily Yedinak, a doctoral candidate in materials science and nanoengineering at Rice, published a new brief, “ Measuring the True Cost of Sustainability: A Case Study in a Green Energy Approach. ”. MT), and carbon fiber (~0.1

Hydrogen 170

Hydrogen Carbon Production Carbon Fiber 170

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.)

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

AUGUST 10, 2011

This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber. Plasan Carbon Composites. . $6,000,000. Zoltek Companies, Inc. Johnson Controls, Inc.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

JUNE 8, 2016

The purpose of the RFI is to identify future strategic research and development pathways for the DOE to pursue with potential to meet future system cost targets. Currently, carbon fiber (CF) reinforced polymer (CFRP) composites are used to make COPVs. The conversion process of PAN precursor to CF is also energy intensive.

Hydrogen 150

Hydrogen Polymer Vehicles Carbon Fiber 150

Green Car Congress

MARCH 24, 2016

Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated a production method they estimate will reduce the cost of carbon fiber as much as 50% and the energy used in its production by more than 60%. Details of the cost analysis will be shared with the prospective licensees.

Carbon Fiber 150

Carbon Fiber Carbon Manufacturer Energy 150

Green Car Congress

OCTOBER 30, 2022

This is a low-volume, high-value market where aircraft will rely on high-cost and cutting-edge technologies to reach new heights with regard to performance and safety. For example, IDTechEx expects that lithium-metal and solid-state batteries, axial flux motors, and carbon fiber materials will play an important role in eVTOL markets.

Market 150

Market Electric Vehicles Vehicles Cars 150

Green Car Congress

AUGUST 26, 2016

DOE’s Office of Fossil Energy is seeking these projects as part of the Department’s Carbon Storage program, which has the goal of developing and advancing technologies to improve the effectiveness of carbon storage, reduce the cost of implementation, and be ready for widespread commercial deployment in the 2025–2035 timeframe.

Convert 150

Convert Production Coal CO2 150

Green Car Congress

AUGUST 18, 2017

The drive unit’s high efficiency means low costs of ownership: Fuel costs compared with an equivalent gasoline engine are much lower, at around €4 (US $4.70) per 100 kilometers (62.1 In gasoline mode, these figures are 5.6 liters per 100 kilometers (42.0 mpg US) and 126 grams of CO 2 per kilometer (202.8 kilogram (1.3 mi) available.

Audi 150

Audi Gas Available Standards 150

Green Car Congress

DECEMBER 20, 2013

Some specific goals include: Cutting battery costs from their current $500/kWh to $125/kWh. Reducing the cost of electric drive systems from $30/kW to $8/kW. Integrated computational materials engineering (ICME) development of carbon fiber composites for lightweight vehicles. lb saved; with ?

Vehicles 246

Vehicles Fuel Economy Carbon Fiber Plug-in 246

Green Car Congress

APRIL 9, 2019

With CNG technology SEAT has the advantage of being able to offer customers a real alternative that is both effective and modern, in a vehicle that costs virtually the same as an equivalent diesel model. Plus, the maintenance costs of the TGI models are similar to those of traditional combustion engine vehicles. The new SEAT Leon 1.5

Gasoline-Electric 304

Gasoline-Electric Gasoline Gas Gas-Electric 304

Green Car Congress

JUNE 12, 2012

The top two awards, one of $9 million to a project led by Dow Chemical, and one of $8.999 million to a project led by PolyPlus, will fund projects tackling, respectively, the manufacturing of low-cost carbon fibers and the manufacturing of electrodes for ultra-high-energy-density lithium-sulfur, lithium-seawater and lithium-air batteries.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Clean Fleet Report

DECEMBER 1, 2021

The front-wheel drive Mazda MX-5 Miata and Hyundai Veloster R-Spec are wonderful, handle great and are zippy, but are not in the same conversation with the much larger, rear-wheel drive, more powerful and heavier Corvette Stingray. With a twist of a couple latches off comes the removable carbon fiber roof, letting in the open air.

Chevrolet 87

Chevrolet MPG Clean Cleaning 87

Green Car Congress

NOVEMBER 17, 2014

For the near-term, the focus is on improving performance and lowering the cost of high-pressure compressed hydrogen storage systems. Related to this, DOE seeks by 2020 to develop novel precursors and conversion processes capable of reducing the high-volume cost of high-strength carbon fiber by 25% from $13 per pound to ~$9 per pound.

Hydrogen 225

Hydrogen Carbon Fiber 2014 St. Louis 225

Green Car Congress

JULY 10, 2010

Grant applications are sought to develop rapid processing technologies for carbon fiber reinforced polymers that can be used in primary and secondary structures of passenger vehicles. saline water).

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

MAY 7, 2009

Increases in Lightweight Materials Technology (+$11.7M) will support R&D and pilot-scale demonstrations for reducing the costs of automotive aluminum, magnesium, and carbon-fiber components and structures.

2010 150

2010 PHEV Hydrogen Fuel 150

Green Car Congress

FEBRUARY 15, 2022

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. 3D-Printed Ceramic Thermocatalytic CO 2 Reactor with High Carbon Conversion and Energy Efficiencies - $3,100,104. Dimensional Energy.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

JANUARY 22, 2014

This AOI is to address two major technical gaps in the performance of automotive aluminum alloys: Low strength among cost competitive automotive sheet alloys such as 5xxx and 6xxx series. High cost of high-strength aluminum alloys such as high performance 6xxx and 7xxx series. Carbon Fiber Composite Targets.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Green Car Congress

SEPTEMBER 19, 2017

Development of Techniques for Tropical Seaweed Cultivation The Marine Biological Laboratory team will focus on the development of a cultivation system for the tropical seaweed Eucheuma isiforme for the production of biomass for conversion to biofuels. coastal and open waters, which is expected to reduce the risk and cost of farm deployment.

Mariner 150

Mariner Production Energy Alaska 150

Green Car Congress

JULY 17, 2015

Furthermore, the batteries in a PHEV are generally smaller than those in any other electric vehicle constructed today and the battery savings in the PHEV from a pure BEV can easily make up for the cost of the small liquid-fueled engine, resulting in a lower-cost production vehicle for mass distribution.

PHEV 150

PHEV Plug-in Renewable Energy 150

Green Car Congress

NOVEMBER 17, 2015

Conversely, high coating thicknesses for the electrodes produce a high energy density. An outer skin made from carbon fiber reinforced polymer (CFRP) encases the inner aluminum shell. lb), corresponding to customer fuel costs of roughly €4 (as of October 2015). The tanks can store around five kilograms (11.0

Audi 150

Audi PHEV Diesel Fuel 150