Green Car Congress

OCTOBER 12, 2012

The “supervisor” control electronics were developed internally by Exagon. The air in the cabin is recycled automatically to reduce the nuisance caused by exhaust gases from other vehicles. The Furtive eGT features a carbon-fiber body; an aluminum rear cradle supports the motors, gearbox and power electronics.

2013 342

2013 Production MPH Motor 342

Green Car Congress

MARCH 6, 2012

Toyota Motor Corporation (TMC) unveiled the FT-Bh (Future Toyota B-segment Hybrid), a lightweight, next-generation small gasoline-electric hybrid concept car at the 82nd Geneva International Motor Show. Due to small amount of heat generated by high-efficiency engines, heat from both the engine and exhaust is used for heating the interior.

Plug-in 317

Plug-in Hybrid Toyota MPG 317

Green Car Congress

JUNE 24, 2013

The XL1 is aggressively optimized for efficiency in all areas of its design and technology—from materials (carbon fiber reinforced polymer monocoque); to powertrain (0.8L The battery comprises 60 25Ah cells, with a carbon-fiber case. two-cylinder diesel, 20 kW electric motor and 5.5 Materials and weight.

Plug-in 324

Plug-in Diesel Plug Hybrid 324

Green Car Congress

AUGUST 16, 2016

These trucks haul 80% of goods in the United States and use about 28 billion gallons of fuel per year, accounting for around 22% of total transportation energy usage—presenting a significant opportunity for carbon emissions reduction and energy savings for a key segment of the US transportation sector. Federal funding. Description.

Vehicles 150

Vehicles Plug-in Lithium Ion Universal 150

Green Car Congress

DECEMBER 20, 2013

Integrated computational materials engineering (ICME) development of carbon fiber composites for lightweight vehicles. Possible areas of interest for technology to improve fuel efficiency include: Development of high-performance low-temperature catalysts for exhaust aftertreatment. Dual-fuel technologies.

Vehicles 246

Vehicles Fuel Economy Carbon Fiber Plug-in 246

Green Car Congress

MARCH 30, 2023

Carbon fiber, produced via artisan craftmanship in the Sant’Agata Bolognese factory, is the principal structural element within the new car, used not only in the monofuselage and frame but also for many elements of the bodywork. The Revuelto is the first super sports car to be fitted with a 100% carbon fiber front structure.

Carbon Fiber 259

Carbon Fiber Hybrid Lithium Ion Recharge 259

Clean Fleet Report

DECEMBER 1, 2021

The vertical, quad exhaust ports sit in the lower fascia that is designed with ground effect channels. BMW says the “twin-tailpipe exhaust system reduces back pressure for the V8 engine while generating the emotionally rich M-typical soundtrack accompanying the engine’s formidable power delivery.” Cameleon lounge lizard territory.

BMW 78

BMW PHEV Los Angeles Plug-in 78

Green Car Congress

DECEMBER 2, 2009

In addition, these TDI engines share important internal engine details for reducing emissions. In both cases, the technical package includes exhaust gas recirculation, oxidation catalytic converter and diesel particulate filter. The car features a safety frame of aluminium, steel and carbon fiber. TDI and the 1.6

MPG 265

MPG Concept Diesel Hybrid 265

Green Car Congress

MARCH 22, 2022

The main fan is a total of 8 meters in diameter with 12 hollow carbon fiber fixed-pitch blades and driven by a five-megawatt, 6700 horsepower electric motor. Absent engine and exhaust sounds, wind noise will be more noticeable inside the cabin of an electric vehicle. HALO Wind Tunnel Main Fan. Fan Specifications. Max Wind Speed.

Ohio 359

Ohio Wind Honda Carbon Fiber 359

Green Car Congress

DECEMBER 16, 2010

The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles. Development of Low-Cost Carbon Fiber. AOI 2: Lightweighting Materials. Subtopics include: Low-Cost Development of Magnesium.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

JANUARY 22, 2015

Area of Interest (AOI) 3: Body-in-White Joining of Carbon Fiber Composites to Lightweight Metals (Aluminum, Advanced High Strength Steel, or Magnesium) at Prototype Scale for High-Volume Manufacturing. CFD software is used by all internal combustion engine developers in the automotive and related industries.

Fuel 150

Fuel Hydrogen Vehicles Carbon Fiber 150

Clean Fleet Report

DECEMBER 1, 2021

If you order the performance exhaust or go for the Z51 package, those numbers go up to 495 and 470. With a twist of a couple latches off comes the removable carbon fiber roof, letting in the open air. The LED tail lights sit wide above the two sets of dual chrome exhaust tips, making for an almost menacing look.

Chevrolet 85

Chevrolet MPG Clean Cleaning 85

Cars That Think

MARCH 29, 2022

The world’s leading sports- and luxury-car brands, together with muscle-car mavens like Dodge, are now pushing the envelope of the relatively inefficient internal combustion engine (ICE). Eventually, people will want vehicles powered by internal combustion because they are quaint. A jaw-dropping weight-to-power ratio of 1.57

Plug-in 92

Plug-in Ferrari Engine Hybrid 92

Green Car Congress

JUNE 29, 2015

Below it, the exhaust manifold is integrated into the cylinder head—a key element of efficient thermal management. Emissions stay low due to high- and low-pressure exhaust-gas recirculation and multi-stage exhaust-gas aftertreatment including an SCR system (selective catalytic reduction). Internal connectivity.

Audi 150

Audi Gas Engine MPH 150

Green Car Congress

APRIL 10, 2012

Exhaust Aftertreatment Materials. In order of priority, low temperature exhaust after-treatment catalysts are needed for the reduction of Oxides of Nitrogen (NO x ), Carbon Monoxide (CO), or unburned hydrocarbons (HCs) from internal combustion engines. Innovative Engine Boosting Technologies. Advanced Manufacturing.

Hydrogen 210

Hydrogen Fuel Range Vehicles 210

Green Car Congress

AUGUST 14, 2014

Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles (Area of Interest 2). This project will develop, integrate and implement predictive models for Carbon-Fiber Reinforced Polymer composites that link the material design, molding process and final performance.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

MARCH 1, 2016

Techrules, a new China-based automotive R&D company, made its global debut at the 2016 Geneva International Motor Show with the unveiling of a Turbine-Recharging Electric Vehicle (TREV) series hybrid system applied in a 6-motor, all-wheel drive supercar concept. It is made of a new compound material that gives it superior durability.

Range 150

Range Companies China Carbon Fiber 150

Green Car Congress

OCTOBER 28, 2015

Acura unveiled the production model of the next-generation NSX at the North American International Auto Show (NAIAS) this past January ( earlier post ), and now has provided more technical detail on the high-performance hybrid sports car and its new Sport Hybrid-AWD power unit. With the newly designed twin-turbocharged 3.5-liter

Acura 150

Acura Hybrid Lithium Ion Engine 150

Green Car Congress

SEPTEMBER 12, 2017

The Mercedes-AMG Project ONE will make its world première at the International Motor Show (IAA) in Frankfurt/Main. The exhaust gas and compressor turbines are separated from one another and located at an optimum position to the exhaust side and to the intake side of the V6 engine, and connected to one another by a shaft.

Mercedes 150

Mercedes PHEV Lithium Ion Engine 150

Green Car Congress

SEPTEMBER 30, 2010

Because the exhaust gases form part of the active aerodynamic package, Jaguar has utilized a specialized zirconia-molybdenum coating. This advanced heat-resistant coating is regularly used in Formula One cars and is applied in a plasma spray to the carbon-fiber diffuser to protect it from the exhaust gases.

Extended Range 371

Extended Range Gas-Electric Gas Electric Vehicles 371

Green Car Congress

JANUARY 22, 2014

AOI 2: Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles. ($6M) For the purposes of this AOI, a carbon fiber composite is defined as a composite that combines carbon fiber with polymer resin. Carbon Fiber Composite Targets.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Get Electric Vehicle

JUNE 2, 2021

First, let us look at how an IC (Internal combustion) engine-powered vehicle operates. An exhaust is also required along with efficient lubrication. Thanks to its carbon-fiber and Kevlar deck, . What Makes Designing An EV More Flexible. In simple terms, an IC engine works by burning fuel inside the engine cylinders.

Electric Vehicles 52

Electric Vehicles Vehicles MPH Electric 52

Green Car Congress

JULY 17, 2015

The alternative-fuel car evolved to reduce exhaust emissions and other problems derived from burning fossil fuels. He was formerly with the University of Wisconsin and Rockwell International, and holds a Ph.D. To restore balance we must protect the oxygen-producing biomass of Earth and reduce the amount of carbon emissions.

PHEV 150

PHEV Plug-in Renewable Energy 150