Green Car Congress

JANUARY 18, 2014

Sample topic areas that might address one or more of these barriers include: Novel cell, module or pack designs that significantly improve the thermal or safety performance, or significantly reduce the weight, volume, and cost of non? conventional manufacturing machinery or equipment. Carbon Fiber or Lightweight Materials.

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

JULY 12, 2017

Two projects will research, develop, and use integrated computation materials engineering (ICME) techniques to develop low cost carbon fiber from a variety of feedstocks and precursors that can be used to make carbon fiber with less energy and lower cost. Lead organization. Description.

Carbon Fiber 150

Carbon Fiber Li-ion Mercedes GM 150

Green Car Congress

AUGUST 10, 2011

This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

OCTOBER 31, 2013

This includes, but is not limited to, novel tank designs and cost reduction concepts; carbon fiber reduction or elimination; Type III and Type IV tanks with alternative liner materials; conformable tank designs; alternative operating conditions (e.g., kWh per kilogram H 2 ) to meet a 300-mile driving range goal.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

OCTOBER 24, 2016

HydroGEN is being launched as part of the Energy Materials Network (EMN) that began in February of this year, crafted to give American entrepreneurs and manufacturers a competitive edge in the global development of clean energy in support of the President’s Materials Genome Initiative and advanced manufacturing priorities.

Water 150

Water Hydrogen Production Green 150

Green Car Congress

OCTOBER 30, 2022

This is a low-volume, high-value market where aircraft will rely on high-cost and cutting-edge technologies to reach new heights with regard to performance and safety. For example, IDTechEx expects that lithium-metal and solid-state batteries, axial flux motors, and carbon fiber materials will play an important role in eVTOL markets.

Market 150

Market Electric Vehicles Vehicles Cars 150

Green Car Congress

DECEMBER 30, 2022

To date, efforts have been invested in developing carbon fibers, carbon electrodes, porous carbon foam/scaffolds, and carbon nanosheets from asphaltenes. Consequently, research on the valorization of asphaltenes has sparked over the past few years. —Saadi et al.

Waste 492

Waste Manufacturer Carbon Fiber Polymer 492

Green Car Congress

MARCH 24, 2016

Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated a production method they estimate will reduce the cost of carbon fiber as much as 50% and the energy used in its production by more than 60%. Details of the cost analysis will be shared with the prospective licensees.

Carbon Fiber 150

Carbon Fiber Carbon Manufacturer Energy 150

Green Car Congress

MAY 29, 2010

When incorporated into resins, fuzzy fibers enable composites to be tailored for electrical and thermal conductivity, chemical and biological sensing, energy storage and conversion, thermal management and other properties. Everybody is growing carbon nanotubes on substrates. Khalid Lafdi. Brian Rice.

Carbon Fiber 170

Carbon Fiber Energy Production Ohio 170

Green Car Congress

APRIL 9, 2019

As well as ecological and tax benefits, TGI technology offers exceptionally low costs per kilometer—up to 50% cheaper than a gasoline equivalent model and 30% cheaper than a diesel—and with the further improvements SEAT has made to the technology, now it can go even further before needing to be refueled.

Gasoline-Electric 304

Gasoline-Electric Gasoline Gas Gas-Electric 304

Green Car Congress

DECEMBER 16, 2010

The engines shall have extremely low engine-out nitrogen oxides (NO x ) and particulate matter (PM) as a target; and shall have efficiency similar to state-of-the-art direct injection diesel engines (i.e., DOE highly encourages applicants to collaborate and team with an original equipment manufacturer (OEM) or industrial supplier.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

JUNE 12, 2012

The US Department of Energy (DOE) awarded more than $54 million—leveraging approximately an additional $17 million in cost share from the private sector—for 13 projects to advance transformational technologies and materials that can help manufacturers significantly increase the energy efficiency of their operations and reduce costs.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

FEBRUARY 15, 2022

Synteris proposes an additive manufacturing process that would replace the traditional insulating metalized substrate, substrate attach, and baseplate/heat exchanger with an additively-manufactured ceramic packaging that acts as both an electrical insulator and heat exchanger for better thermal management. Cornell University.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

JULY 10, 2010

Specifically, low cost and energy-efficient processes are sought that can be demonstrated and validated under field conditions to meet needs of the nascent algal biomass industry. Algae cultures tend to be relatively dilute, and the energy requirement to remove water from the cultures can be a significant portion of the energy balance.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

NOVEMBER 17, 2014

Related to this, DOE seeks by 2020 to develop novel precursors and conversion processes capable of reducing the high-volume cost of high-strength carbon fiber by 25% from $13 per pound to ~$9 per pound. In FY 2014, one area of focus was low-cost, high-strength carbon fiber precursors and advanced tank designs.

Hydrogen 225

Hydrogen Carbon Fiber 2014 St. Louis 225

Green Car Congress

JANUARY 4, 2020

Low-Cost Retrofit Kit for Integral Reciprocating Compressors to Reduce Emissions and Enhance Efficiency. The University of Oklahoma (Norman, OK) plans to develop, build, and validate a low-cost, field-installable, remotely-controlled natural gas compressor retrofit kit. AOI 2A: Multifunction Catalyst.

Gas 186

Gas Gas-Electric West Virginia Carbon Fiber 186

Green Car Congress

SEPTEMBER 21, 2017

These projects will work to solve research and developmental challenges encountered for the successful scale-up and reliable operations of integrated biorefineries (IBRs); decrease capital and operating expenses; and focus on the manufacture of advanced or cellulosic biofuels and higher-value bioproducts.

South Dakota 150

South Dakota South Carolina Carbon Fiber Texas 150

Green Car Congress

AUGUST 27, 2020

REEACH projects seek to create innovative, cost-effective, and high-performance energy storage and power generation sub-systems for electric aircraft, with a focus on fuel-to-electric power conversion technologies. Both programs work to decrease energy usage and associated carbon emissions for commercial aircraft propulsion systems.

Carbon 218

Carbon Hybrid Electric Electrical 218

Green Car Congress

JANUARY 22, 2014

Area Of Interest (AOI) 1: Development of Low-Cost, High-Strength Automotive Aluminum Sheet. This AOI is to address two major technical gaps in the performance of automotive aluminum alloys: Low strength among cost competitive automotive sheet alloys such as 5xxx and 6xxx series. Carbon Fiber Composite Targets.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Green Car Congress

JULY 17, 2015

In order to accomplish this transition in a timely way, we must start the mass manufacturing of PHEV vehicles and renewable energy generation and distribution systems now. Some examples are the use of fiberglass, carbon fiber and Kevlar substituting for wood and metal in vehicle parts, appliances and furniture products.

PHEV 150

PHEV Plug-in Renewable Energy 150