Green Car Congress

FEBRUARY 2, 2013

The objective of this AOI is to develop and demonstrate the capability of multi-material joining techniques for aluminum to advanced steel for light-duty vehicle body-in-white (BIW) joints. Carbon Fiber Polymer Composite. AOI 3: Body-in-white Joining of Aluminum to Advanced High Strength Steel at Prototype Scale.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

FEBRUARY 15, 2022

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. Harvesting Infrared Light to Improve Photosynthetic Biomass Production - $1,347,122. Select OPEN 2021 projects include: Synteris.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

DECEMBER 20, 2015

Grid Modernization for Electric Vehicles. Dissimilar metal joint systems are limited to aluminum, steel, magnesium, and carbon fiber composites. Advances for the Production of Low Cost Electric Drive Vehicle Motors. Funds may not be used for the purchase or installation of fueling infrastructure or vehicles.

Li-ion 150

Li-ion Vehicles Low Cost Grid 150

Green Car Congress

JANUARY 21, 2016

This FOA contains a total of 11 Areas of Interest (AOIs) and focuses on advanced light-weighting; advanced battery development; low cost electric motor development; enabling technologies for high efficiency engines; and support for EV deployment and AFV workplace safety programs. Carbon Fiber Polymer Composite.

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150

Green Car Congress

OCTOBER 30, 2015

The lightweight SP:01, which goes on sale in Asia and Europe over the coming weeks, combines a carbon fiber body with an aluminum chassis. Featuring a 285 hp / 210 kW electric motor, the car is fitted with a single-speed automatic transmission as standard, with the option of twin-speed automatic or 6-speed manual transmissions.

Detroit 150

Detroit Azerbaijan South Africa Production 150

Green Car Congress

SEPTEMBER 4, 2013

TFSI and the transmission is a disc-shaped electric motor producing 110 kW and 400 N·m (295 lb-ft). In EV mode, only the electric motor is active. The doors and fenders are made of aluminum, and the roof, the engine hood and the rear hatch are made of carbon fiber-reinforced polymer. Located between the 4.0

Audi 257

Audi Plug-in Concept MPG 257

Green Car Congress

JANUARY 22, 2014

These areas of interest apply to light, medium and heavy duty on-road vehicles. AOI 2: Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles. ($6M) The fibers can be continuous or discontinuous and the resin can be either a thermoplastic or thermoset polymer.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Green Car Congress

MARCH 24, 2010

EN-V is propelled by electric motors in each of its two driving-mode wheels. Dynamic stabilization technology empowers EN-V, giving it the unique ability to carry two passengers and light cargo in a footprint that’s about a third of a traditional vehicle. It can literally “turn on a dime” within its own operating envelope.

GM 270

GM Concept Future Personal 270

Green Car Congress

JULY 17, 2015

The PHEV (Plug-in Hybrid Electric Vehicle), a subset of the electric car, combines a primary electric motor with a much smaller back-up engine fueled with a hydrocarbon/biofuel mix. (In At present, PHEV technology alone is equipped to improve the current electric grid. Appendix E: PHEV and the Electrical Grid—fast charge v.

PHEV 150

PHEV Plug-in Renewable Energy 150

Charged EVs

MAY 18, 2021

The battery packs were made by Williams Advanced Engineering, and a few other components such as motors, inverters and braking systems were made by undisclosed companies. There are two motors, each with 200 kW (225 hp) of power. The front and rear motors are traditionally cooled with water.”. Total torque is 450 Nm.

Saudi Arabia 67

Saudi Arabia Hydrogen Fuel Charging 67

Green Car Congress

SEPTEMBER 11, 2011

The outer skin of the show car is made of carbon fiber-reinforced polymer (CFRP); the occupant cell is a mix of CFRP monocoque and an aluminum structure. Manufactured using cladding technology, the 21-inch wheels are very light and feature a variant of the blade design from the Audi e-tron models. lb), stores 7.1 mph) in 16.9

Concept 210

Concept Audi Charging Carbon Fiber 210

Green Car Congress

NOVEMBER 17, 2015

The electric motor produces 94 kW of power and 350 N·m (258.1 During everyday driving, most braking operations use the electric motor, which then works as a generator. The Audi e-tron quattro concept uses three electric motors:one electric motor drives the front axle, the two others act on the rear axle. Click to enlarge.

Audi 150

Audi PHEV Diesel Fuel 150