Green Car Congress

OCTOBER 31, 2013

While possibly adequate for some stationary applications and vehicle platforms, they may be too expensive and bulky for many non-stationary applications and may not be able to provide a driving range that meets consumer expectations across the full range of light-duty vehicle platforms. Currently, high-pressure (i.e.,

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

SEPTEMBER 15, 2016

From the top-of-cab solar panels powering its battery and interior lights, to its ultra-light aluminum frame and highly advanced 425 horsepower 11-liter proprietary engine, the SuperTruck concept vehicle allowed Volvo engineers to push the boundaries of heavy truck efficiency. Click to enlarge. for the D11 and 2.5% for the D13.

Volvo 150

Volvo Fuel North America Waste 150

Green Car Congress

DECEMBER 16, 2010

approximately 45% peak thermal efficiency for light duty and greater-than 50% peak thermal efficiency for heavy duty). The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

DECEMBER 20, 2013

mpg) for light trucks by 2025 (54.5 mpg light duty average, or 4.3 Integrated computational materials engineering (ICME) development of carbon fiber composites for lightweight vehicles. mpg) for cars and 203 gCO 2 /mi (43.7

Vehicles 246

Vehicles Fuel Economy Carbon Fiber Plug-in 246

Green Car Congress

JANUARY 13, 2015

The design was chosen in May 2014 from more than 200 submitted to Local Motors by the company’s online co-creation community after launching a call for entries. The winning design was submitted by Michele Anoè who was awarded a cash prize plus the opportunity to see his design brought to life. Earlier post.).

Motor 150

Motor Motors Motoring Carbon Fiber 150

Green Car Congress

JANUARY 22, 2015

DOE also announced up to $35 million to advance fuel cell and hydrogen technologies, including enabling the early adoption of fuel cell applications, such as light duty fuel cell electric vehicles. Area of Interest (AOI) 2: Ultra-Light Door Design, Manufacturing and Demonstration. less than a baseline structure.

Fuel 150

Fuel Hydrogen Vehicles Carbon Fiber 150

Green Car Congress

FEBRUARY 1, 2013

In light of uncertainty concerning consumer preferences and manufacturer plans for PEVs, DOE is selecting ambitious technical goals for this program. Develop new low-cost and highly efficient motor designs, alternative magnetic materials with reduced rare earth content, and improved motor manufacturing methods. —Blueprint.

Plug-in 247

Plug-in Zinc Air Li-ion 2012 247

Green Car Congress

JUNE 12, 2012

The top two awards, one of $9 million to a project led by Dow Chemical, and one of $8.999 million to a project led by PolyPlus, will fund projects tackling, respectively, the manufacturing of low-cost carbon fibers and the manufacturing of electrodes for ultra-high-energy-density lithium-sulfur, lithium-seawater and lithium-air batteries.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

JUNE 12, 2015

ft) long Audi R8 e-tron is recognizable by its unique lighting solutions on the air inlets, front apron and sideblades. Its exterior skin, painted in Magnetic Blue, combines body parts made of aluminum and carbon fiber reinforced polymer (CFRP), such as the front and rear lids. Visually, the 4.40 meter (14.4

Batteries 150

Batteries Battery Li-ion Audi 150

Green Car Congress

FEBRUARY 15, 2022

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. Harvesting Infrared Light to Improve Photosynthetic Biomass Production - $1,347,122. Select OPEN 2021 projects include: Synteris.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

SEPTEMBER 15, 2009

Placing the battery in front of the rear axle ensures an optimal axle load distribution without compromising the compact overall design and the generous amount of interior space. All add-on parts—doors, covers, sidewalls and roof—are made of a fiber-reinforced plastic. The battery system is water-cooled.

Audi 257

Audi Concept Cars Electric 257

Green Car Congress

JULY 10, 2010

An emphasis on bio-fuels, which are suitable for an SOFC and derived from sources (such as cellulosic biomass, agricultural residues, or municipal solid waste) that do not compete with food supply, is required. However, they must accommodate high ripple currents, in a high temperature environment. Improved Magnetic Materials for Motors.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

FEBRUARY 2, 2013

When the final funding opportunity announcement is released following this public comment period, DOE will accept applications from industry, national laboratories, and university-led teams to address these challenges and enable technologies that drive innovation in vehicle design. Carbon Fiber Polymer Composite.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Cars That Think

AUGUST 8, 2022

An initial showroom model, and surely more to come, will be built on the company’s new Mercedes Modular Architecture platform, designed for smaller "entry-luxury" models such as the A-Class and CLA. We don’t get enough waste heat, so we had to insulate the electric motor. The Benz sipped electrons at 8.7

Range 117

Range Mercedes Carbon Fiber France 117

Green Car Congress

AUGUST 27, 2020

REEACH (Range Extenders for Electric Aviation with Low Carbon and High Efficiency) project descriptions. Compact Propulsion Engine Optimized with Waste Heat Recovery (CO-POWER); $2,815,760. The work will result in the development of a first-of-its-kind aircraft gas turbo-electric engine with a sCO 2 waste heat recovery cycle.

Carbon 218

Carbon Hybrid Electric Electrical 218

Green Car Congress

AUGUST 14, 2014

Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles (Area of Interest 2). This project will develop, integrate and implement predictive models for Carbon-Fiber Reinforced Polymer composites that link the material design, molding process and final performance.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

JULY 30, 2013

With its new architecture, use of carbon fiber reinforced plastic, and premium mobility service offerings, the “ i3 marks the beginning of a new mobility age ,” said Dr. Reithofer. The passenger cell is attached to the aluminum drive frame (giving a more modern slant to body-on-frame design). kWh per kilometer (0.21

BMW 247

BMW New York London Production 247

Green Car Congress

DECEMBER 20, 2015

Dissimilar metal joint systems are limited to aluminum, steel, magnesium, and carbon fiber composites. The objective of this effort is to develop and show technology readiness for advanced electric machine technologies with a focus on motor design, material, and production pathways to significantly lower cost.

Li-ion 150

Li-ion Vehicles Low Cost Grid 150

Green Car Congress

APRIL 10, 2012

Phase I projects must complete (1) a preliminary design; (2) a characterization of laboratory devices using the best measurements available, including a description of the measurement methods; and (3) the preparation of a road map with major milestones, that would lead to a production model of a system that would be built in Phase II.

Hydrogen 210

Hydrogen Fuel Range Vehicles 210

Green Car Congress

JANUARY 21, 2016

This FOA contains a total of 11 Areas of Interest (AOIs) and focuses on advanced light-weighting; advanced battery development; low cost electric motor development; enabling technologies for high efficiency engines; and support for EV deployment and AFV workplace safety programs. Carbon Fiber Polymer Composite. kilowatt (kW).

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150

Green Car Congress

JULY 17, 2015

Frank has spent more than 30 years in breakthrough vehicle development, during which he received two world records for vehicle fuel economy, designed nine generations of PHEVs, and was a four-time winner of US DOE Advanced Vehicle Design competitions. To ignore this potential is wasteful and foolish.

PHEV 150

PHEV Plug-in Renewable Energy 150

Green Car Congress

NOVEMBER 17, 2015

This makes it possible for the waste heat from the electrical drive components to be made available to the interior of the Q7 e-tron quattro. Aerodynamically-optimized design with a drag coefficient of 0.25, the electric e-tron quattro drivetrain delivers up to 370 kW of power output. Pouch cells and prismatic cells are more versatile.

Audi 150

Audi PHEV Diesel Fuel 150

Green Car Congress

APRIL 14, 2022

North of the Alps there was light rain and further south a gentle headwind blew in the sunshine. The lightweight design concept of the VISION EQXX is comprehensive—from the materials used to innovative bionic structures that deliver a favorable power-to-weight ratio. However, it has 50% less volume and is 30% lighter.

Mercedes 259

Mercedes Miles Charging MPH 259

Green Car Congress

JANUARY 4, 2022

Rather than simply increasing the size of the battery, the cross-functional, international design and envineering team focused on maximizing long- distance efficiency. They pulled out all the stops in drivetrain efficiency, energy density, aerodynamics and lightweight design.

Mercedes 273

Mercedes Range Cars Electric 273