Green Car Congress

DECEMBER 30, 2022

To date, efforts have been invested in developing carbon fibers, carbon electrodes, porous carbon foam/scaffolds, and carbon nanosheets from asphaltenes. Consequently, research on the valorization of asphaltenes has sparked over the past few years. —Saadi et al.

Waste 492

Waste Manufacturer Carbon Fiber Polymer 492

Green Car Congress

MAY 19, 2014

Potential high-value products from isolated lignin include low-cost carbon fiber, engineering plastics and thermoplastic elastomers, polymeric foams and membranes, and a variety of fuels and chemicals—all currently sourced from petroleum. Each product stream, however, has its own distinct challenges. Ragauskas et al.

Production 225

Production Carbon Fiber Polymer Fuel 225

Green Car Congress

DECEMBER 16, 2010

The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles. Subtopics include: Low-Cost Development of Magnesium. Development of Low-Cost Carbon Fiber.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

DECEMBER 20, 2013

VTO supports a broad technology portfolio aimed at developing and deploying advanced highway transportation technologies to reduce petroleum consumption and greenhouse gas emissions, while meeting or exceeding vehicle performance and cost expectations. Some specific goals include: Cutting battery costs from their current $500/kWh to $125/kWh.

Vehicles 246

Vehicles Fuel Economy Carbon Fiber Plug-in 246

Green Car Congress

JUNE 12, 2012

The US Department of Energy (DOE) awarded more than $54 million—leveraging approximately an additional $17 million in cost share from the private sector—for 13 projects to advance transformational technologies and materials that can help manufacturers significantly increase the energy efficiency of their operations and reduce costs.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

JULY 10, 2010

Specifically, low cost and energy-efficient processes are sought that can be demonstrated and validated under field conditions to meet needs of the nascent algal biomass industry. High-temperature, high-strength, lower-cost permanent magnets (PMs) are needed for traction motors for HEVs and PHEVs. saline water).

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

FEBRUARY 15, 2022

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. Combined, the new materials and manufacturing methods are expected to improve torque density by 40-70% and reduce manufacturing costs.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

SEPTEMBER 21, 2017

Topic Area 2: High-value products from waste and/or other undervalued streams in an integrated biorefinery. TRI’s work in these systems will promote feedstock flexibility and enable the processing of low-cost feedstock to enhance IBRs’ economic viability. The MIBR will improve IBR sustainability and cost-effectiveness.

South Dakota 150

South Dakota South Carolina Carbon Fiber Texas 150

Green Car Congress

AUGUST 27, 2020

ASCEND projects work to develop innovative, lightweight, and ultra-efficient all-electric powertrain with advanced thermal management systems that help enable efficient net-zero carbon emissions for single-aisle passenger commercial aircraft. Compact Propulsion Engine Optimized with Waste Heat Recovery (CO-POWER); $2,815,760.

Carbon 218

Carbon Hybrid Electric Electrical 218

Green Car Congress

AUGUST 14, 2014

The US Department of Energy (DOE) is awarding more than $55 million to 31 new projects to accelerate research and development of vehicle technologies that will improve fuel efficiency and reduce costs under a program-wide funding opportunity announced in January. (DE-FOA-0000991, DE-FOA-0000991, earlier post.) Description. Ford Motor Company.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

JULY 17, 2015

To ignore this potential is wasteful and foolish. It is wasteful and destructive to be burning this versatile molecule; we must stop. Some examples are the use of fiberglass, carbon fiber and Kevlar substituting for wood and metal in vehicle parts, appliances and furniture products. But use of petroleum will continue.

PHEV 150

PHEV Plug-in Renewable Energy 150

Green Car Congress

NOVEMBER 17, 2015

This makes it possible for the waste heat from the electrical drive components to be made available to the interior of the Q7 e-tron quattro. The driver can program times for charging as well as preheating or cooling and adapt them to his or her requirements, such as departure time, so as to save resources and costs.

Audi 150

Audi PHEV Diesel Fuel 150

Green Car Congress

JANUARY 4, 2022

Inspired by natural forms and in partnership with innovative start-ups, engineers used advanced digital tools to lower weight and reduce waste by removing excess material assisted by 3D printing. The lid is made from a unique, sustainable composite material derived from sugar-cane waste, reinforced with carbon fiber, as used in Formula 1.

Mercedes 273

Mercedes Range Cars Electric 273