Green Car Congress

SEPTEMBER 23, 2019

Researchers at Argonne National Laboratory have developed a new approach to cobalt-free Li-ion cathodes that avoids some of the problems with other low-cobalt cathode approaches. Mn is abundant, environmentally benign, and less conductive, while Co has limited abundance, is relatively toxic, and becomes metallic on charging.

Li-ion 255

Li-ion Ni-Li San Diego Lithium Ion 255

Green Car Congress

JULY 19, 2020

Researchers from the Cockrell School of Engineering at The University of Texas at Austin have developed a cobalt-free high-energy lithium-ion battery, eliminating the cobalt and opening the door to reducing the costs of producing batteries while boosting performance in some ways. graduate Wangda Li. graduate Wangda Li.

Lithium Ion 307

Lithium Ion Ni-Li Texas Li-ion 307

Green Car Congress

APRIL 16, 2018

Researchers led by a team at UC Berkeley have demonstrated high-capacity manganese-rich cathodes for advanced lithium-ion batteries. On one end of this compositional spectrum, LiCoO 2 dominates the electronics sector, whereas Ni-rich materials are of interest for the automotive sector. —Lee et al. V, 20 mA g ?

Li-ion 257

Li-ion Ni-Li Design Lithium Ion 257

Green Car Congress

DECEMBER 18, 2014

Korea) has developed a novel high-voltage electrolyte additive, di-(2,2,2 trifluoroethyl)carbonate (DFDEC), for use with the promising lithium-rich layered composite oxide high-energy cathode material xLi 2 MnO 3 ·(1-x)LiMO 2 (M = Mn, Ni, Co). O 2 (Li 1.2 Mn 0.525 Ni 0.175 Co 0.1 O 2 (Li 1.2 Mn 0.525 Ni 0.175 Co 0.1

Li-ion 329

Li-ion Ni-Li Energy Lithium Ion 329

Green Car Congress

AUGUST 7, 2018

A team from Tohoku University and Tokyo Tech have addressed one of the major disadvantages of all-solid-state batteries by developing batteries with a low resistance at their electrode/solid electrolyte interface. cm 2 in solid-state Li batteries with Li(Ni 0.5 —Kawasoko.

Ni-Li 262

Ni-Li Li-ion Japan Batteries 262

Green Car Congress

AUGUST 8, 2010

A new ternary Sn–Ni–P anode material for Li-ion batteries shows high reversible capacity and excellent coulombic efficiency, with an initial discharge capacity and charge capacity of 785.0 After the 100 th discharge–charge cycling, capacity retention is 94.2% mAh g -1 and 567.8 mAh g -1 , respectively.

Ni-Li 210

Ni-Li Li-ion Lithium Ion Batteries 210

Green Car Congress

MAY 28, 2018

Researchers at the University of Akron have developed hierarchical porous Mn 3 O 4 /C nanospheres as anode materials for Li-ion batteries. mA/g), excellent ratability (425 mAh/g at 4 A/g), and extremely long cycle life (no significant capacity fading after 3000 cycles at 4A/g) as an anode in a Li-ion battery.

Li-ion 199

Li-ion Ni-Li Batteries Battery 199

Green Car Congress

SEPTEMBER 28, 2012

Simulated zone projection image based on LMNO crystal model with 20% Ni/Li disorder corresponding to blue rectangle. Simulated zone projection image based on LMNO crystal model with 10% Ni/Li disorder corresponding to white rectangle. For example, a layered composite based on lithium nickel manganese oxide Li 1.2

Li-ion 274

Li-ion Ni-Li Lithium Ion Batteries 274

Green Car Congress

FEBRUARY 10, 2022

Out of several candidates that could replace Li in rechargeable batteries, calcium (Ca) stands out as a promising metal. Not only is Ca 10,000 times more abundant than Li, but it can also yield—in theory—similar battery performance.

Ni-Li 302

Ni-Li Li-ion Batteries Battery 302

Green Car Congress

FEBRUARY 19, 2016

Researchers at Japan’s National Institute of Advanced Industrial Science and Technology (AIST) have developed a new class of contenders for high-voltage and high-capacity Li-ion cathode materials with the composition Na x Li 0.7-x x Ni 1-y Mn y O 2 (0.03. One of the compositions—Na 0.093 Li 0.57

Li-ion 150

Li-ion Ni-Li Molten Salt Batteries 150

Green Car Congress

AUGUST 21, 2021

Researchers at the Helmholtz Institute Ulm (HIU), founded by the Karlsruhe Institute of Technology (KIT) in cooperation with the University of Ulm, have developed a new lithium-metal battery that offers extremely high energy density of 560 Wh/kg—based on the total weight of the active materials—with remarkably good stability.

Ni-Li 476

Ni-Li Energy Kits Li-ion 476

Green Car Congress

OCTOBER 6, 2014

A team at Korea’s Ulsan National Institute of Science and Technology (UNIST), led by Dr. Jaephil Cho, has developed a new high-power NCA (nickel-cobalt-aluminum) Li-ion cathode material: LiNi 0.81 As a result, the team suggests, their new NCA material holds great promise for commercial use in batteries within EV and HEV systems.

Li-ion 231

Li-ion Ni-Li Power Powered 231

Green Car Congress

NOVEMBER 13, 2012

Cycling characteristics of 700 nm 3D(Si,Ni) at 1C showing a reversible specific capacity of 1,650 mAh/g after 120 cycles of charge/discharge. A 700 nm 3D(Si,Ni) material at 1C showing a reversible specific capacity of 1650 mAh/g after 120 cycles of charge/discharge. Credit: ACS, Gowda et al. Click to enlarge.

Li-ion 231

Li-ion Ni-Li Lithium Ion Batteries 231

Green Car Congress

MARCH 8, 2013

Schematic illustration of the aqueous rechargeable lithium battery (ARLB) using the coated lithium metal as anode, LiMn 2 O 4 as cathode and 0.5 mol l -1 Li 2 SO 4 aqueous solution as electrolyte. mol l -1 Li 2 SO 4 aqueous solution as electrolyte, an ARLB is built up. Wang et al. Click to enlarge. —Wang et al.

Li-ion 281

Li-ion Low Cost Recharge Ni-Li 281

Green Car Congress

APRIL 2, 2021

The options for high-manganese cathodes include LMO (lithium-manganese oxide), LNMO (lithium-nickel-manganese oxide), Li-Mn-rich (also abbreviated as LMR-NMC), and LMP (lithium manganese phosphate) or LMFP (lithium-manganese-iron phosphate). Comparison between NMC 811 and three high-manganese cathodes (LMFP, Li-Mn-rich, LNMO).

Ni-Li 293

Ni-Li Li-ion Nissan Commercial 293

Green Car Congress

JANUARY 16, 2011

Researchers in South Korea report the synthesis of high capacity Mn-rich mixed oxide cathode materials for Li-ion batteries. Novel cathode active materials, Li[Li x (Ni 0.3 The newly Mn-rich cathode active materials were then adopted as cathodes to show the benefits for Li-ion rechargeable batteries.

Li-ion 236

Li-ion Ni-Li South Korea Batteries 236

Green Car Congress

SEPTEMBER 9, 2015

Gerbrand Ceder (now at UC Berkeley/Lawrence Berkeley Lab as of 1 July, formerly at MIT) have developed a new class of high capacity cation-disordered oxides—lithium-excess nickel titanium molybdenum oxides (Li-Ni-Ti-Mo, or LNTMO)—for Li-ion cathode materials which deliver capacities up to 250 mAh/g.

Li-ion 150

Li-ion Ni-Li Batteries Battery 150

Green Car Congress

JUNE 6, 2016

The ability to mitigate degradation mechanisms for Ni-rich NMC and NCA provides insight into a method to enable the performance of high-voltage Li-ion batteries, they concluded. V UCV in 2 Ah pouch cells. —Mohanty et al. UCV, respectively.

Li-ion 150

Li-ion Ni-Li Batteries Battery 150

Green Car Congress

JULY 13, 2011

A team of researchers from CNRS, IPB and SAFT in France and UMICORE in Belgium report on the synthesis and performance of a new high-power cathode material for Li-ion batteries (NMCA) in a paper in the Journal of Power Sources. Li 1.11 (Ni 0.40 Biensan (2011) Li(Ni 0.40 Al 0.05 ) 0.89 Al 0.05 ) 0.89

Li-ion 210

Li-ion Ni-Li Power Powered 210

Green Car Congress

JULY 8, 2013

The working concept of I3 – /I – redox reaction in the aqueous Li-I 2 battery. A team from Japan’s RIKEN, led by Hye Ryung Byon, has developed a lithium-iodine (Li-I 2 ) battery system with a significantly higher energy density than conventional lithium-ion batteries. Zhao et al.

Li-ion 255

Li-ion Ni-Li Energy Batteries 255

Green Car Congress

FEBRUARY 21, 2012

Charge and discharge profile of first and second cycles of Li 2 MnSiO 4 samples measured at 45 °C at 0.02C rate. Researchers from Tohoku University, Japan, have developed novel ultrathin Li 2 MnSiO 4 nanosheets for use as a cathode material in lithium-ion batteries. Credit: ACS, Rangappa et al. Click to enlarge.

Li-ion 230

Li-ion Lithium Ion Ni-Li Batteries 230

Green Car Congress

FEBRUARY 11, 2016

In … solid-state LIBs [lithium-ion batteries], one important component that needs to be improved to make it more suitable for high performance applications is the electrolyte material. Such solid composite electrolytes also have been previously shown to reduce lithium dendrite formation and proliferation in lithium metal batteries.

Li-ion 150

Li-ion Ni-Li Batteries Battery 150

Green Car Congress

FEBRUARY 24, 2012

Lithium-ion battery cell for plug-in hybrid vehicles (left) and. Panasonic Corporation will supply prismatic lithium-ion battery cells for Ford Motor Company’s Fusion Hybrid Electric and C-Max Hybrid Electric as well as the Ford Fusion Energi and C-Max Energi plug-in hybrids. hybrid electric vehicles (right).

Li-ion 225

Li-ion Nickel Metal Hydride Ni-Li Plug-in 225

Green Car Congress

FEBRUARY 12, 2019

A team at Argonne National Laboratory has used spatially resolved energy dispersive X-ray diffraction to obtain a “movie” of lithiation and delithiation in different sections of a Li-ion battery cell and to quantify lithium gradients that develop in a porous graphite electrode during cycling at a 1C rate (full discharge in 1 hour).

Li-ion 186

Li-ion Ni-Li Lithium Ion Charging 186

Green Car Congress

MARCH 29, 2015

Batteries for electrified vehicles require much longer calendar and cycle lifetimes, as well as improved high temperature tolerance, than their portable consumer electronics counterparts. Researchers at Dalhousie University (Canada) led by Dr. Jeff Dahn now report that Li[Ni 1/3 Mn 1/3 Co 1/3 ]O 2 (NMC111)/graphite and Li[Ni 0.42

Li-ion 150

Li-ion Ni-Li Charging Canada 150

Green Car Congress

JULY 26, 2016

The dissolution of transition metals (TMs) from Li-ion battery cathodes is a major contributor to cell degradation during cycling and aging. Li 3 PO 4 was unique, in that its coatings on oxide cathode materials maintained equilibrium under both lithiated and delithiated conditions. —Snydacker et al.

Li-ion 150

Li-ion Ni-Li Lithium Ion Polymer 150

Green Car Congress

AUGUST 17, 2016

Conventional electrolytes for Li-ion batteries contain ethylene carbonate (EC) and other additives. However, the cycling performance of Li-ion cells using these carbonate-based electrolytes has been poor at higher voltages (≥4.4 O 2 (NCA)/graphite Li-ion cells). LiCoO 2 (LCO)/graphite and LiNi 0.80

Li-ion 150

Li-ion Carbon Ni-Li Canada 150

Green Car Congress

JANUARY 4, 2016

Researchers from the Korea Advanced Institute of Science and Technology (KAIST), with colleagues from the Korea Institute of Energy Research (KIER), Qatar University and major battery manufacturer LG Chem have developed a technique for the delicately controlled prelithiation of SiO x anodes for high-performance Li-ion batteries.

Ni-Li 150

Ni-Li Li-ion Manufacturer Batteries 150

Green Car Congress

AUGUST 19, 2009

have developed two cobalt-free mixed metal oxide cathode materials for Li-ion batteries containing 20% iron: Li 1+x (Fe 0.2 Mn 0.4 ) 1-x O 2 and Li 1+x (Fe 0.2 offers an initial charge-discharge capacity of 250 mAh g -1 or more, and an average initial discharge voltage of 3.46V. Mn 0.6 ) 1-x O 2.

Li-ion 186

Li-ion Ni-Li Batteries Battery 186

Green Car Congress

JANUARY 6, 2011

and the US Department of Energy’s (DOE) Argonne National Laboratory (ANL) have reached a non-exclusive worldwide licensing agreement to use Argonne’s patented composite cathode material for advanced lithium-ion batteries. Argonne also licensed the cathode technology to LG Chem for use in battery cells.

Li-ion 210

Li-ion GM Ni-Li Lithium Ion 210

Green Car Congress

MAY 31, 2016

Researchers at the Department of Energy’s (DOE) Lawrence Berkeley National Laboratory (Berkeley Lab) report a major advance in understanding how oxygen oxidation creates extra capacity in lithium-rich cathodes, opening the door to batteries with far higher energy density. O 2 , Li 2 Ru 0.5 O 2 and Li 1.3 —Seo et al.

Ni-Li 150

Ni-Li Li-ion Light Batteries 150

Green Car Congress

MARCH 13, 2014

have developed an analysis method that enables direct observation of electron activity in the cathode material of lithium-ion batteries during charging and discharging. To develop such a material, an accurate reading of the electron activity inside the battery is essential. —Mitzner et al. Earlier post.).

Li-ion 244

Li-ion Nissan Lithium Ion Ni-Li 244

Green Car Congress

SEPTEMBER 4, 2010

Discharge curves at different rates after charging at 1C. A team of researchers from the Korea Advanced Institute of Science and Technology, Università degli Studi di Milano-Bicocca (Italy), and Stanford University have synthesized ultrathin LiMn 2 O 4 nanowires for use as a Li-ion cathode material offering high power densities.

Li-ion 186

Li-ion Ni-Li Lithium Ion Power 186

Green Car Congress

MAY 15, 2019

Layered lithium transition metal oxide cathodes feature a relatively high capacity, making them of importance for Li-ion batteries. —Khalil Amine, Argonne distinguished fellow and battery scientist and co-corresponding author. A paper describing the development is published in Nature Energy. … —Xu et al.

Li-ion 191

Li-ion Lithium Ion Ni-Li Polymer 191

Green Car Congress

OCTOBER 28, 2022

The University of Texas at Arlington will develop acoustic stimulation and electrolytic proton production to produce lithium (Li) and nickel (Ni) from CO 2 -reactive minerals and rocks that contain calcium (Ca) and magnesium (Mg), while sequestering CO 2 in the form of carbonate solids. Travertine Technologies. from gangue minerals.

Supplies 345

Supplies Ni-Li Carbon Universal 345

Green Car Congress

DECEMBER 5, 2013

Windows etched into a foil covering allow soft X-rays to measure charge dynamics in an operating electrode. Researchers at Berkeley Lab and its Advanced Light Source have developed a new soft X-ray spectroscopy technique that can measure the migration of ions and electrons in an integrated, operating battery electrode.

Batteries 286

Batteries Battery Charging Li-ion 286

Green Car Congress

DECEMBER 31, 2014

Schematic illustration of a Li-O 2 cell employing a mesoporous catalytic polymer membrane. A modified Li-O 2 battery with a catalytic membrane showed a stable cyclability for 60 cycles with a capacity of 1000 mAh/g and a reduced degree of polarization (?0.3 Credit: ACS, RYu et al. Click to enlarge.

Ni-Li 225

Ni-Li Li-ion Polymer Battery 225