2012 Convert Exhaust Installation 
Green Car Congress
DECEMBER 15, 2020
With SCR twin dosing technology in the exhaust gas system, the diesel unit now undercuts the Euro 6d emission standard limits while also running quietly and smoothly, according to the company. The four-cylinder TDI engine with the internal designation EA 288 made its debut in 2012. As previously, the 2.0 This has a volume of 3.4
Green Car Congress
MAY 16, 2014
Studies have found that despite meeting more stringent regulatory standards for exhaust emissions during type approval, many vehicles equipped with selective catalytic reduction (SCR) systems have significantly elevated emissions of NO x during in-use driving—particularly when operating in urban traffic. —Lowell and Kamakaté.
Green Car Congress
JANUARY 11, 2011
The 2012 S350 BlueTEC 4MATIC features a urea selective catalytic reduction emissions aftertreatment system. AdBlue, an aqueous urea solution, is injected into the exhaust flow. Releasing ammonia, which converts up to 80% of NO x into nitrogen and water in the downstream SCR (Selective Catalytic Reduction) catalytic converter.
Green Car Congress
MARCH 15, 2012
The inverter converts DC generated by the cell stack into AC. The hot-water storage tank stores heat exhausted from the power generator as hot-water. A desulfurizer removes the sulfur odorant in the utility gas to prevent the cell stack and other parts from deterioration. is achieved, with an overall energy efficiency of 90.0% (LHV).
DIY Electric Car
MARCH 3, 2012
It has been about 5 months since I posted my first blog about converting my car to electricity. Winter 2011-2012: Engine Bay and Under-car: The car is now completely gas-less. No engine, no fuel tank, no alternator, pumps, radiators, exhaust pipes, or muffler. Picking a Motor: I have spent many nights deciding on motors.
Green Car Congress
FEBRUARY 20, 2013
The free-piston linear generator works in a similar manner to a conventional combustion engine, but instead of converting the linear movement of the piston into the rotational movement of the crankshaft, it generates electricity directly. Intake, exhaust and fuel injection. A fuel-air mix is ignited in the combustion chamber.
Green Car Congress
SEPTEMBER 26, 2012
Oh presented a paper on the work, which was the result of two years of research activity in conjunction with Bombardier Recreational Projects, at the ASME 2012 Internal Combustion Engine Division Fall Technical Conference. Everything else—pistons, porting and crankcase, bearings, exhaust, etc.—were
Expert insights. Personalized for you.
435 
Let's personalize your content