Green Car Congress

SEPTEMBER 27, 2013

Zoltek is a large two carbon fiber manufacturer; large tow carbon fiber is carbon fiber with 40,000 or more filaments applied for applications such as wind turbine blades and reinforced plastics compounds, and is produced on modified acrylic staple fiber production lines for textiles.

Carbon Fiber 199

Carbon Fiber Wind Carbon Hungary 199

Green Car Congress

MARCH 1, 2017

Lawrence Livermore National Laboratory (LLNL) researchers have become the first to 3D-print aerospace-grade carbon fiber composites, opening the door to greater control and optimization of the lightweight, yet stronger than steel material. Click to enlarge. —fluid analyst Yuliya Kanarska.

Carbon Fiber 150

Carbon Fiber Carbon Polymer Parts 150

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.)

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

OCTOBER 4, 2012

As innovative new production technologies lower carbon fiber cost, the global market for carbon fiber reinforced plastics (CFRPs) will more than double to $36 billion in 2020, growing at a compound annual growth rate of 13% from $14.6 billion in 2012, according to a new Lux Research report. kg today to $10.5/kg

Carbon Fiber 218

Carbon Fiber Wind Carbon 2020 218

Green Car Congress

MARCH 24, 2016

Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated a production method they estimate will reduce the cost of carbon fiber as much as 50% and the energy used in its production by more than 60%. Details of the cost analysis will be shared with the prospective licensees.

Carbon Fiber 150

Carbon Fiber Carbon Manufacturer Energy 150

Green Car Congress

JULY 1, 2022

The serial production of the BMW i3 has ended , some eight and a half years after it was launched. At the same time, the BMW Group Plant Leipzig becomes the first location in the company’s global production network where BMW and MINI models are manufactured together. The BMW i3 (combined power consumption: 16.3 - 15.3

BMW 435

BMW Production Wind Energy Storage 435

Green Car Congress

DECEMBER 20, 2011

signed a definitive agreement to form a joint venture to manufacture and commercialize carbon fiber and derivatives. The joint venture will develop and globally market a broad range of products and technical service support in the rapidly expanding carbon-fiber based composites industry.

Carbon Fiber 230

Carbon Fiber Carbon Turkey Wind 230

Green Car Congress

FEBRUARY 18, 2011

million) grant from the Bavaria FIT program under the Bavarian undersecretary of the state of Katja Hessel to fund the development of a novel carbon-fiber precursor with revised properties. The objective of the company is to develop and supply carbon fiber precursor exclusively for SGL Group and European production.

Carbon Fiber 186

Carbon Fiber Grant Carbon 2006 186

Green Car Congress

JUNE 24, 2020

NPROXX was formed in 2018 in a split from EMS, a leading supplier of high-quality carbon fiber products and specialist manufacturing services. When used for hydrogen storage in hydrogen fuel-cell trucks or buses, these carbon fiber-reinforced vessels can result in a weight reduction in the gas containment system.

Hydrogen 418

Hydrogen Carbon Fiber Fuel Installation 418

Green Car Congress

OCTOBER 20, 2020

At the BMW Group plant in Leipzig, the 200,000 th BMW i3 model rolled off the production line last week. The BMW i3 with 125 kW/170 hp and BMW i3s with 135 kW/184 hp are built in Leipzig for the world market on a dedicated production line and by specially trained employees. The BMW i3s (combined power consumption: 14.6 – 14.0

BMW 418

BMW Carbon Fiber Wind Lithium Ion 418

Green Car Congress

OCTOBER 30, 2009

SGL Group and BMW Group have formed a 51:49 joint venture to manufacture carbon fibers and fabrics for the automotive industry. The joint venture will be operated through two companies, one based in North America (SGL Automotive Carbon Fibers LLC), and the other in Germany (SGL Automotive Fibers GmbH & Co KG).

Carbon Fiber 186

Carbon Fiber BMW Carbon Mitsubishi 186

Green Car Congress

MAY 5, 2020

Hydrogen as a zero-carbon energy carrier has the potential to transform fundamentally the global energy landscape—but the production must benefit the environment, according to experts at Rice University’s Baker Institute for Public Policy. The largest markets for non-combusted carbon are carbon black (~10s MT), graphite (~0.1

Hydrogen 170

Hydrogen Carbon Production Carbon Fiber 170

Green Car Congress

JUNE 12, 2012

The top two awards, one of $9 million to a project led by Dow Chemical, and one of $8.999 million to a project led by PolyPlus, will fund projects tackling, respectively, the manufacturing of low-cost carbon fibers and the manufacturing of electrodes for ultra-high-energy-density lithium-sulfur, lithium-seawater and lithium-air batteries.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

MARCH 31, 2014

Vehicle technologies span a range from new Si/graphene Li-ion anode materials and composites for motor windings to diesel aftertreatment and advanced lubricants. By the end of Phase II, Mainstream plans to demonstrate a production-ready prototype that exceeds DOE targets for fuel economy, operating range, and cost. Lead organization.

Exhaust 261

Exhaust Wind 2014 Motors 261

Green Car Congress

MAY 3, 2021

The US Department of Energy (DOE) awarded $19 million for 13 projects in traditionally fossil-fuel-producing communities across the country to support production of rare earth elements and critical minerals essential to the manufacturing of batteries, magnets, and other components important to the clean energy economy.

West Virginia 305

West Virginia Wyoming Coal North Dakota 305

Green Car Congress

AUGUST 9, 2017

The SGL Group is a leading manufacturer worldwide of products and materials made from carbon. The extensive product portfolio ranges from carbon and graphite products, carbon fibers all the way through to composites. Closing is expected in the fourth quarter 2017.

Carbon 170

Carbon Carbon Fiber Lithium Ion Wind 170

Green Car Congress

OCTOBER 27, 2014

New analysis by Lux Research shows that carbon fiber demand will grow at an overall 13% compound annual growth rate (CAGR) from 36,000 tons in 2013 to 86,000 tons in 2020. Wind carbon fiber demand will reach just 22,000 MT, compared to the 2012 forecast of 53,000 MT. Click to enlarge.

2020 231

2020 Carbon Fiber 2012 Wind 231

Green Car Congress

SEPTEMBER 16, 2020

They are made of fiber-composite materials and, in keeping with Audi’s lightweight construction philosophy, each weighs just 26 kilograms (57.3 The ultra high-strength outer shell comprises two layers: an inner layer of carbon fiber-reinforced polymer (CFRP) and an outer layer of glass fiber-reinforced polymer (GFRP).

Audi 504

Audi Gas Gas-Electric Gasoline-Electric 504

Green Car Congress

JUNE 21, 2013

SGL Group and Samsung established a strategic partnership for carbon fiber composite materials with the foundation of a marketing & sales joint venture. The primary objective of the cooperation is to develop new industrial and electronic applications with carbon composite materials for Samsung and the Korean market.

Carbon 170

Carbon Carbon Fiber South Korea Wind 170

Green Car Congress

MARCH 26, 2013

The US Department of Energy (DOE) launched the Clean Energy Manufacturing Initiative (CEMI), which will focus on growing US manufacturing of clean energy products and boosting US competitiveness through major improvements in manufacturing energy productivity. Earlier post.) University of Texas at Austin. 7,798,383.

Manufacturer 246

Manufacturer Carbon Fiber Clean Cleaning 246

Green Car Congress

MARCH 9, 2019

These are not simply manufacturing innovations: they are end-to-end, whole-life solutions that address every aspect of the manufacture, use and recycling of carbon fiber reinforced polymer (CFRP) and the way in which its properties can enable new approaches to vehicle design and manufacture. CFRP is a material of huge promise.

Engine 265

Engine Carbon Fiber Affordable Manufacturer 265

Green Car Congress

OCTOBER 17, 2013

Germany-based Evonik Industries and Austria-based SECAR Technologie GmbH have established a joint venture, LiteCon Advanced Composite Products, to mass-produce fiber-reinforced composite components for the automotive and aviation industries.

Industrial 199

Industrial Industry Carbon Fiber Austria 199

Green Car Congress

AUGUST 25, 2018

The show car’s body structure is made of carbon fiber. Functional attachment parts made of carbon fiber such as the front splitter epitomize the cool and rational aspect of the philosophy. The digital cockpit includes a curved panoramic screen that projects from behind and a touchscreen integrated into the steering wheel.

Mercedes 199

Mercedes Carbon Fiber Cars Concept 199

Green Car Congress

SEPTEMBER 7, 2021

While in conventional electrical machines the cooling fluid flows through a jacket outside the stator, in the case of direct cooling, the oil flows directly along the copper windings. During production, the magnets are inserted into the rotor laminations and extrusion-coated with plastic.

Porsche 417

Porsche Concept Cars Electrical 417

Green Car Congress

NOVEMBER 17, 2014

Related to this, DOE seeks by 2020 to develop novel precursors and conversion processes capable of reducing the high-volume cost of high-strength carbon fiber by 25% from $13 per pound to ~$9 per pound. In FY 2014, one area of focus was low-cost, high-strength carbon fiber precursors and advanced tank designs.

Hydrogen 225

Hydrogen Carbon Fiber 2014 St. Louis 225

Green Car Congress

JANUARY 9, 2015

IACMI is dedicated to overcoming these barriers by developing low-cost, high-production, energy-efficient manufacturing and recycling processes for composites applications. In the wind energy industry, advances in low-cost composite materials will help manufacturers build longer, lighter and stronger blades to create more energy.

Tennessee 150

Tennessee Universal Manufacturer Honda 150

Green Car Congress

AUGUST 20, 2022

—Eric Bach, SVP of Product and Chief Engineer, Lucid Group. These technically innovative electric motors incorporate Lucid’s microjet stator cooling and wave winding. These unique wheels also feature removable carbon-fiber aero disk wheel covers, which further optimize the aerodynamic efficiency of the car.

Motors 195

Motors Motoring Motor Carbon Fiber 195

Green Car Congress

AUGUST 19, 2023

Lamborghini unveiled the Lanzador electric concept at Monterey Car Week—a vision of a future purely-electric fourth series production Lamborghini. The Lanzador is a preview of the production vehicle that Lamborghini will present in 2028. 100 percent merino wool.

Concept 370

Concept Electrical Electric Carbon 370

Green Car Congress

JULY 1, 2020

With tests recently completed at Windshear ’s advanced rolling-road wind tunnel, Lucid verified a coefficient of drag of 0.21, making the Lucid Air the most aero-efficient luxury car. The production version of the Lucid Air will debut in an online reveal on 9 September 2020. —Peter Rawlinson.

Industrial 243

Industrial Industry Carbon Fiber EV1 243

Green Car Congress

NOVEMBER 30, 2018

The LEAF NISMO RC features a multitude of lightweight components and a full carbon-fiber racing monocoque structure, allowing it to tip the scales at just 1,220 kilograms. The power-to-weight ratio results in an impressive performance of zero to 100 kph in just 3.4 seconds—50% quicker than the previous model.

Nissan 259

Nissan All-Electric Power Powered 259

Green Car Congress

MAY 29, 2010

The Third Frontier award, announced 26 May in Columbus, will be matched by UDRI and Ohio collaborators Goodrich, Owens Corning and Renegade Materials to fund the creation and equipment of a full-scale production facility for the hybrid fabric. But in doing so, electrical and thermal conductivity inherent to metals is lost. Brian Rice.

Carbon Fiber 170

Carbon Fiber Energy Production Ohio 170

Green Car Congress

JUNE 29, 2018

Together with other highly-flexible controllable systems in the BMW Group production network, they will contribute to the stability of the public grid outside of the plant. Electricity generation from variable renewable electricity sources (VRE) such as wind and solar power has grown rapidly and is expected to continue to do so.

Grid 191

Grid BMW Power Powered 191

Green Car Congress

APRIL 4, 2019

Thanks to emission-free driving, electric vehicles can compensate for a large part of the additional CO 2 emissions in the production phase. It includes the extraction of raw materials—the use of platinum in the fuel cell has been reduced by 90% compared to the B-Class F-CELL—production and use, and finally recycling.

Hydrogen 274

Hydrogen Mercedes Power Powered 274

Green Car Congress

JULY 30, 2013

The production version of the i3. In a simultaneous—and video linked—unveil in New York, London and Beijing, BMW introduced the production version of its i3 battery-electric vehicle on Monday. EVs in general currently have a larger carbon burden in the production phase than conventional vehicles (e.g.,

BMW 247

BMW New York London Production 247

Green Car Congress

APRIL 29, 2015

At SAE 2015 World Congress last week, Toyota presented a set of four technical papers describing some of the technology innovations used in its production fuel cell hybrid electric vehicle Mirai ( earlier post ). However, Mirai uses the same inverter and motor as already adopted in mass-production hybrid electric vehicles.

Congress 150

Congress Toyota Fuel Carbon Fiber 150

Green Car Congress

JULY 22, 2013

Designed from the ground up to be an electric car, the BMW i3 uses the industry’s first mass produced carbon fiber reinforced plastic (CFRP) passenger cell mounted on an aluminum chassis. The BMW i3 will offer interior space comparable to the BMW 3 Series on a shorter overall body.

BMW 210

BMW Carbon Fiber Lithium Ion Germany 210

Green Car Congress

APRIL 14, 2022

This new blueprint for automotive engineering has delivered a new benchmark for electric vehicle efficiency and range, and the technology in the VISION EQXX will be deployed in upcoming series-production Mercedes vehicles. At times, the VISION EQXX sliced through the wind at speeds of up to 140 km/h (87 mph).

Mercedes 259

Mercedes Miles Charging MPH 259