Remove Conversion Remove Fuel Economy Remove Low Cost Remove Waste
article thumbnail

Tech: Renewable Diesel: A Sustainable Substitute

Clean Fleet Report

Renewable diesel can be produced using various technologies including those that process solid biomass, liquid biomass, waste gasification and pyrolysis. Representative drive cycles were selected for chassis dynamometer evaluation to determine the fuel economy and emissions impact of renewable versus petroleum diesel in a controlled setting.

article thumbnail

US DOE awards more than $175M to 40 projects for advanced vehicle research and development

Green Car Congress

This project will enable diesel-like efficiency and increased maximum power output in a gasoline engine by using a secondary fuel to suppress engine knock under high load. This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. UChicago Argonne LLC. Zoltek Companies, Inc. 3,500,000.

article thumbnail

DOE issues $10M incubator FOA for batteries, power electronics, engines, materials, fuels and lubricants

Green Car Congress

burn systems and controls that allow compliance with proposed EPA Tier 3 emissions regulations with smaller penalty in fuel economy. pressure fuel injection, and higher pressure engine operation, for implementing the clean diesel combustion strategy. competitive waste heat recovery technologies. based systems for waste?heat

article thumbnail

DOE to award up to $184M for advanced vehicle research and development in 8 areas of interest

Green Car Congress

The successful market implementation of these materials in vehicles requires that they be low cost and available in sufficient abundance to make a compelling business case. For this reason the focus of this AOI includes the development of low-cost approaches to the manufacturing of both magnesium and carbon fiber.

Li-ion 231
article thumbnail

DOE releases SBIR/STTR FY16 Phase 1 Release 2 topics; hydrogen, electric vehicles, more efficient combustion engines; biogas-to-fuels

Green Car Congress

The first hydrogen TTO is focused on durable, high activity electrocatalyst with low platinum content and low cost for polymer electrolyte membrane fuel cell applications. All fuel consumption testing must be conducted according to engine industry norms. are desired. grams PGM per liter of engine displacement).

Hydrogen 150
article thumbnail

DOE announces $26.6M SBIR/STTR FY15 Phase 1 Release 2 awards; fuel cells, batteries, power electronics and efficient combustion engines

Green Car Congress

This quality control device will help to drive down the costs of fuel cells by reducing waste and improving the process efficiency of roll-to-roll manufacturing of polymer electrolyte membranes. High Loading Lithium-Ion Electrode Architecture for Low Cost Electric Vehicle Batteries Ballast Energy, Inc. 149,871.44.

Li-ion 150
article thumbnail

DOE to issue FY14 Vehicle Technologies program-wide funding opportunity announcement

Green Car Congress

Developing cost-effective technologies to improve new vehicle fuel efficiency and achieve or exceed corporate average fuel economy (CAFE) standards of 144 gCO 2 /mi (61.6 Broadly, VTO program activities are focused on achieving: Saving 1.4 million barrels per day); and. mpg) for cars and 203 gCO 2 /mi (43.7

Vehicles 246