Remove Carbon Fiber Remove Light Remove MPH Remove Supplies
article thumbnail

BMW launching iX5 Hydrogen pilot fleet

Green Car Congress

The stack housing is manufactured in the light metal foundry at BMW Group Plant Landshut using a sand casting technique. The pressure plate, which delivers hydrogen and oxygen to the fuel cell stack, is made from cast plastic parts and light-alloy castings, also from the Landshut plant.

BMW 259
article thumbnail

Audi introduces sport e-bike concept at Wörthersee

Green Car Congress

Its capacity is 530 Wh and it can be fully recharged from a 230 V supply in two and a half hours. LEDs are used for powerful lighting: the front light is integrated into the handlebar, the rear light into the seat. The frame and the swinging arm that holds the back wheel are made of carbon fiber-reinforced polymer (CFRP).

Audi 361
article thumbnail

Audi unveils AI:TRAIL quattro electric off-roader concept

Green Car Congress

mph) on the road. If energy-consuming slip can be avoided, it reduces the supply of torque to the affected wheel. Light weight and maximum body stiffness are, of course, important technical objectives for off-roaders in particular. Lights and drones. The rear light operates in a similar way.

Audi 186
article thumbnail

XL1 dive and drive: Volkswagen aggressively optimizes for efficiency in its sleek diesel plug-in hybrid

Green Car Congress

The XL1 is aggressively optimized for efficiency in all areas of its design and technology—from materials (carbon fiber reinforced polymer monocoque); to powertrain (0.8L The XL1 has a top speed (electronically controlled) of 160 km/h (99 mph); cruising at a constant 100 km/h the XL1 uses only 8.3 kWh to cover more than 0.6

Plug-in 324
article thumbnail

DOE to award up to $184M for advanced vehicle research and development in 8 areas of interest

Green Car Congress

approximately 45% peak thermal efficiency for light duty and greater-than 50% peak thermal efficiency for heavy duty). The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles.

Li-ion 231
article thumbnail

BMW unveils i8 Roadster, 2019 i8 Coupe; optimized eDrive tech increases power and range

Green Car Congress

With hybrid-specific all-wheel drive, the combustion engine driving the rear wheels and the electric motor driving the front wheels, acceleration from 0 to 60 mph takes just 4.2/4.4 seconds (preliminary) for the Coupe and Roadster respectively with both reaching an electronically limited top speed of 155 mph. seconds (preliminary).

BMW 170
article thumbnail

Audi launches next-gen A4 with new Millerized TFSI engine; g-tron model w/ Audi e-gas

Green Car Congress

The standard, start-stop system has also been further improved and comes with new features to reduce fuel consumption further: When the driver stops at a red light, the engine can already be deactivated below 7 kilometers an hour (4 mph); 3 km/h for the A4 3.0 seconds and on to a top speed of 210 km/h (131 mph).

Audi 150