Remove Carbon Fiber Remove Store Remove Supplies Remove Water
article thumbnail

BMW to present BMW iX5 Hydrogen at the IAA Mobility 2021

Green Car Congress

The fuel cell delivers an electrical output of up to 125 kW/170 hp, with water vapor as the only emission. The energy stored in this power battery is also utilized for particularly sporty driving maneuvers—delivering a system output of 275 kW/374 hp and guaranteeing the brand’s signature driving experience.

BMW 418
article thumbnail

BMW launching iX5 Hydrogen pilot fleet

Green Car Congress

After all, it is one of the most efficient ways of storing and transporting renewable energies. The pressure plate forms a gas-tight and water-tight seal around the stack housing. The hydrogen needed to supply the fuel cell is stored in two 700-bar tanks made of carbon-fiber reinforced plastic (CFRP).

BMW 259
article thumbnail

Audi A4 and A5 now available to order as g-tron in Europe; Audi e-gas for 3 years as standard

Green Car Congress

The high-strength, safe gas tanks made from carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP) are located beneath the rearward structure. They store 19 kilograms (41.9 This makes an extra range of more than 450 kilometers (279.6 mi) available. lb) of gas at a pressure of 200 bar.

Audi 150
article thumbnail

Gen 2 Audi A5 Sportback available as bivalent g-tron; Audi e-gas, natural gas or gasoline

Green Car Congress

They store 19 kilograms (41.9 The inner layer consists of a gas-impermeable polyamide matrix, while a second composite layer of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) gives the tank its extremely high strength. Audi e-gas.

Audi 150
article thumbnail

DOE issues $35M funding opportunity for hydrogen and fuel cell technologies

Green Car Congress

Hydrogen Production R&D: High-Temperature Water Splitting compatible with renewable and sustainable energy sources; Advanced Compression; and Advanced Vacuum Insulation for automotive applications. AOI 1 Topic 1: Hydrogen Production R&D: Advanced High‐Temperature Water Splitting. the stack cannot be in a furnace).

Hydrogen 150
article thumbnail

DOE to award up to $184M for advanced vehicle research and development in 8 areas of interest

Green Car Congress

The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles. Development of Low-Cost Carbon Fiber. AOI 2: Lightweighting Materials. Subtopics include: Low-Cost Development of Magnesium.

Li-ion 231
article thumbnail

Toyota FCV Mirai launches in LA; initial TFCS specs; $57,500 or $499 lease; leaning on Prius analogy

Green Car Congress

The amount of water on fuel cell electrolyte membranes has a substantial influence on electricity generation efficiency. Two tanks with a three-layer structure made of carbon fiber-reinforced plastic and other materials are used to store hydrogen at 70 MPa (approximately 700 bars or 10,000 psi). mm and weight of 102 g.

Prius 296