Green Car Congress

FEBRUARY 15, 2022

Breaking the Board: Bringing Three-Dimensional Packaging and Thermal Management to Power Electronics - $2,746,501. Synteris is developing 3D-printable ceramic packaging for power electronic modules to improve their thermal management, power density, performance, and lifetime. Cornell University. Stanford University.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

MARCH 27, 2018

KULR Technology has reached agreement with the National Renewable Energy Laboratory (NREL) to be the exclusive manufacturing and distribution partner for the patented Internal Short Circuit (ISC) device which causes predictable battery cell failures in lithium-ion batteries, making them easier to study and, therefore, safer.

International 150

International Li-ion Lithium Ion Manufacturer 150

Green Car Congress

AUGUST 22, 2011

(Aza compounds replace a carbon atom with a nitrogen atom; π-conjugated compounds have alternating single and multiple bonds in their structure.) Supercapacitors work on a different charge-storage principle than rechargeable batteries, and consist of electrochemical double layers on electrodes, which are wetted by an electrolyte.

Polymer 247

Polymer F-150 Energy Power 247

Green Car Congress

AUGUST 14, 2014

developing beyond Li-ion battery technologies. Through the Advanced Vehicle Power Technology Alliance with the Energy Department, the Department of the Army is contributing an additional $3.7 Beyond Lithium Ion Technologies (Area of Interest 3). Beyond Lithium Ion Technologies (Area of Interest 3).

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

JANUARY 21, 2016

US Energy Secretary Ernest Moniz used the Washington DC Auto show as the venue to announce $58 million in funding for vehicle technology advancements. The objective of this technology area is to research, develop, and demonstrate an integrated PEV bi-direction power-management system capable of operation under on-road and grid-based loads.

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150

Green Car Congress

JANUARY 22, 2014

The new program-wide funding opportunity ( DE-FOA-0000991 ) ( earlier post ), was announced by Energy Secretary Ernest Moniz at the Washington Auto Show. AOI 2: Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles. ($6M) Carbon Fiber Composite Targets.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252

Green Car Congress

DECEMBER 18, 2009

Selected projects range from unmanned, hovering aircraft for inspecting bridges to a high-speed sorting system for recycling aerospace metals to nanomaterials for advanced batteries, including two projects specifically developing advanced electrode materials for Li-ion batteries. Amprius, Inc., A123Systems, Inc.

Manufacturer 186

Manufacturer Lithium Ion Li-ion Low Cost 186

Green Car Congress

NOVEMBER 28, 2012

Power delivery to the rear wheels is via a single-speed transmission. The Li-ion battery pack is placed under the floor. The passenger cell forms the core of the Life module, which is built from carbon fiber-reinforced plastic (CFRP). BMW i3 Concept Coupé. Click to enlarge. Connectivity.

BMW 225

BMW Connect Connected Concept 225

Green Car Congress

JANUARY 12, 2010

A 45 kWh 399 kg (880 lbs) Li-ion battery pack is located for an optimal center of gravity behind the passenger compartment and ahead of the rear axle, along with the converter and power electronics. All add-on parts—doors, lids, sidewalls and roof—are made of a fiber-reinforced plastic. Audi e-tron Concepts. Pack weight.

Detroit 246

Detroit Audi Concept Electrical 246