Green Car Congress

SEPTEMBER 19, 2013

In collaboration with KraussMaffei, Henkel has developed a process for the manufacture of components based on glass or carbon fiber and using high-pressure resin transfer molding (HP-RTM) technology that creates a surface quality good enough for automobile exteriors.

Carbon Fiber 186

Carbon Fiber Production Carbon Manufacturer 186

Green Car Congress

DECEMBER 11, 2018

For future market acceptance of hydrogen fuel cell vehicles or portable devices an efficient, low cost and practical hydrogen storage system and infrastructure suitable for all applications still needs to be developed. To achieve a driving range greater than 500 km in a fuel cell vehicle, about 5 kg of hydrogen is required.

Hydrogen 276

Hydrogen Energy Storage Carbon Fiber Store 276

Green Car Congress

AUGUST 31, 2016

Among the projects selected are one by GM and EPRI of California to improve welding techniques for automobile manufacturing and power plant builds in partnership with Oak Ridge National Laboratory (ORNL). Sepion’s polymer membrane technology provides a counterpoint, yielding long-lasting lithium-sulfur cells. Harper International Corp.

Manufacturer 150

Manufacturer EPRI Lithium Sulfur Carbon Fiber 150

Green Car Congress

JANUARY 31, 2021

has achieved a significant milestone by obtaining an FAA Special Light-Sport Aircraft (LSA) airworthiness certificate for its Transition roadable aircraft. Terrafugia, Inc.

Light 397

Light Carbon Fiber Legal Cars 397

Green Car Congress

OCTOBER 9, 2012

The automotive industry is showing greatly increased interest in the industrial applications of light materials. Their processing capability does not yet meet the required industrial production rates, particularly in the automobile industry, in part due to the number of units to be produced, environmental standards, and so on.

Companies 225

Companies Netherlands Carbon Fiber Industrial 225

Green Car Congress

JUNE 12, 2012

The top two awards, one of $9 million to a project led by Dow Chemical, and one of $8.999 million to a project led by PolyPlus, will fund projects tackling, respectively, the manufacturing of low-cost carbon fibers and the manufacturing of electrodes for ultra-high-energy-density lithium-sulfur, lithium-seawater and lithium-air batteries.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

FEBRUARY 2, 2013

The objective of this AOI is to develop and demonstrate the capability of multi-material joining techniques for aluminum to advanced steel for light-duty vehicle body-in-white (BIW) joints. Carbon Fiber Polymer Composite. AOI 3: Body-in-white Joining of Aluminum to Advanced High Strength Steel at Prototype Scale.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

NOVEMBER 18, 2014

Additional markets will follow, tracking the expansion of a convenient hydrogen refueling infrastructure. Two tanks with a three-layer structure made of carbon fiber-reinforced plastic and other materials are used to store hydrogen at 70 MPa (approximately 700 bars or 10,000 psi). High-pressure Hydrogen Tanks.

Prius 296

Prius Toyota Hydrogen Carbon Fiber 296

Green Car Congress

SEPTEMBER 12, 2011

The group focuses on the development of marketable materials and technologies that are suitable for manufacturing high-performance fiber-reinforced parts for automotive applications. The automobile components to be produced from these materials in the future will be able to withstand high loads despite their light weight.

Industrial 199

Industrial Industry Carbon Fiber Carbon 199

Green Car Congress

JULY 2, 2010

At BMW Group’s Innovation Days: Mobility of the Future briefing in Munich, the company outlined its plans for the upcoming electric Megacity Vehicle (MCV), due onto the market in 2013 ( earlier post ), as well as the new LifeDrive architecture upon which the MCV is based. The Megacity Vehicle is a revolutionary automobile.

BMW 247

BMW Design Carbon Fiber Vehicles 247

Green Car Congress

JANUARY 4, 2020

The automobile industry deploys low-cost MPE sensors today to measure tailpipe emissions. The project, operated in a modular system under cyclical operations, will design and demonstrate a multifunctional catalyst for single-step conversion of the light components of natural gas. Gas to Carbon Fiber Crystals (G2-CFX).

Gas 186

Gas Gas-Electric West Virginia Carbon Fiber 186

Green Car Congress

JULY 30, 2013

With its new architecture, use of carbon fiber reinforced plastic, and premium mobility service offerings, the “ i3 marks the beginning of a new mobility age ,” said Dr. Reithofer. The production of the i3 marks the first time an automobile manufacturing plant in Germany has installed wind turbines on site to directly power production.)

BMW 247

BMW New York London Production 247

Get Electric Vehicle

JUNE 2, 2021

Note that we have given preference to the most practical and marketable vehicle designs. #1 Icon has expertly repaired and redesigned historic automobiles and trucks. They are the gold standard for small-batch, high-end automobile production. Thanks to its carbon-fiber and Kevlar deck, . 1 Icon E-Flyer II.

Electric Vehicles 52

Electric Vehicles Vehicles MPH Electric 52

Green Car Congress

JULY 21, 2014

Now, however, given all the market drivers facing the auto industry (regulations, fossil fuel availability, societal changes, etc.), We are thinking that the right way [to do this] is large scale production, not special small niche cars and we think that a broad product range is necessary to bring this to the markets. TSI, the 2.0

Batteries 356

Batteries Battery MPH All-Electric 356

Green Car Congress

NOVEMBER 17, 2015

At the special high-voltage competence center near Ingolstadt, the focus is on the development of complete systems: packaging, cooling, validation and, in partnership with body development, integration into the automobile. Market launch is scheduled to begin in 2017. Second life. There will also be wireless options.

Audi 150

Audi PHEV Diesel Fuel 150