article thumbnail

Alberta Innovates & NRCan awarding $26.2M to three oil sands clean tech projects; industry kicking in $43.3M

Green Car Congress

Alberta Innovates has teamed up with Natural Resources (NRCan) and industry partners to take three clean oil sands technologies to commercial demonstration. This announcement is a result of NRCan’s Oil and Gas Clean Tech Program. Cenovus Energy will test an oil sands extraction technology using a solvent-driven process.

Oil-Sands 150
article thumbnail

Ceramatec licensing molten sodium technology for heavy oil upgrading; removing the need for diluent for bitumen

Green Car Congress

Flowchart of Molten Sodium Upgrading process. An innovative oil-upgrading technology that can increase the economics of unconventional petroleum resources has been developed under a US Department of Energy-funded project. Source: Field Upgrading. Click to enlarge.

Sodium 199
article thumbnail

Ionic liquid-enhanced solvent extraction for oil sands bitumen shows high recovery rates, less water use and no tailing water

Green Car Congress

Researchers from Tianjin University and the National Engineering Research Centre for Distillation Technology, Tianjin, China, report on the use of an ionic liquid (IL) with low viscosity to enhance bitumen recovery from oil sands by solvent extraction while reducing adverse impacts in the ACS journal Energy & Fuels.

Oil-Sands 170
article thumbnail

UK, Iran team develops new materials to improve enhanced oil recovery

Green Car Congress

A new class of materials which are suitable agents for displacing oil in enhanced oil recovery operations has been developed by scientists at Swansea University (UK) and scientists at Islamic Azad University in Iran. There, they used a 5-spot glass micromodel to evaluate the suitable agents for oil displacing in EOR. 7b01675.

Iran 150
article thumbnail

New power-dense 2.0L GDI turbo with twin-scroll turbocharger and new combustion system offered in 2013 Chevrolet Malibu

Green Car Congress

Increased efficiency in all of the new Ecotec engines is achieved in part through lower engine friction, which was reduced by up to 16% using new technologies such as a variable-displacement oil pump. Additional engine features include: A precision sand-cast engine block with cast-in-place iron liners. Forged steel crankshaft.

2013 236
article thumbnail

Jeep introduces 2018 Wrangler with mild hybrid, diesel options; plug-in hybrid version in 2020

Green Car Congress

A variable displacement two-stage oil pump provides high oil pressure under high speed and load, but switches to a low-pressure mode for improved fuel economy during typical driving conditions. A large capacity oil cooler extends the oil change interval and ensures engine durability. Total displacement is 1,995 cc.

Jeep 210
article thumbnail

GM introduces new Cadillac 2013 ATS RWD luxury sport sedan; 2 four-cylinder, one V6 gasoline engine options, with diesel in the works

Green Car Congress

Increased efficiency in the new four-cylinders was achieved partly through lower engine friction, which was reduced by up to 16% using new technologies such as a variable-displacement oil pump and, with the 2.5L, an actively controlled thermostat. Even the oil volume is optimized for minimal weight. Air-to-air intercooling system.

Cadillac 239