Remove Carbon Fiber Remove Fuel Economy Remove Light Remove Store
article thumbnail

Shell/AirFlow Starship hyper-fuel efficient Class 8 truck to make cross-country run

Green Car Congress

Shell has partnered with the Airflow Truck Company to collaborate on a hyper-aerodynamic, fuel-efficient Class 8 concept truck: Starship. This next-generation concept truck features a custom, aerodynamic design and aims to demonstrate improvements in fuel economy for Class 8 trucks. and ending in Jacksonville, Fla.

San Diego 281
article thumbnail

DOE issues FOA for up to $4M for development of advanced H2 storage systems and materials

Green Car Congress

Most of the hydrogen that is used today is stored as a compressed gas (with pressures typically ranging from 150 to 700 bar) or a liquid (liquid storage requires cryogenic temperatures near 20 K). In addition, the costs associated with high-pressure fast refueling adds to the overall costs associated with using hydrogen fuel cells.

article thumbnail

DOE issues $10M incubator FOA for batteries, power electronics, engines, materials, fuels and lubricants

Green Car Congress

energy storing) materials. burn systems and controls that allow compliance with proposed EPA Tier 3 emissions regulations with smaller penalty in fuel economy. pressure fuel injection, and higher pressure engine operation, for implementing the clean diesel combustion strategy. Carbon Fiber or Lightweight Materials.

article thumbnail

Road Test: 2023 McLaren GT

Clean Fleet Report

Unassuming Speed McLaren lets you know right away the GT is a serious driver’s car—the carbon fiber steering wheel is void of all buttons and controls for the audio, telephone and cruise control—meaning serious driving ahead. The roof with a fixed glass panel slopes to the carbon fiber deck lid with a window over the 14.8

article thumbnail

Toyota introduces second-generation Mirai fuel cell electric vehicle as design and technology flagship

Green Car Congress

In the Toyota Mirai, compressed hydrogen fuel is stored in three 10,000-psi carbon-fiber-reinforced high-pressure tanks: one mounted longitudinally in the center of the car; another mounted transversely under the rear seat, and a third below the battery. Cooling air for the battery is silently pulled in from the cabin.

Toyota 448
article thumbnail

DOE to award up to $184M for advanced vehicle research and development in 8 areas of interest

Green Car Congress

approximately 45% peak thermal efficiency for light duty and greater-than 50% peak thermal efficiency for heavy duty). The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles.

Li-ion 231
article thumbnail

Ford focused on lightweighting as a major enabling technology for low-emission, fuel-efficient vehicles from ICEs to EVs

Green Car Congress

Taking the displacement down gets you on a percentage basis the best fuel economy value versus other technologies. Once you take the weight out, you take the engine down and get substantial deltas in fuel economy. liter EcoBoost I-4, expected to deliver 30% better fuel economy than the 2010 model.

Ford 252