Carbon Fiber Design Polymer Recharge 
Cars That Think
NOVEMBER 1, 2023
But to incorporate many different types of sensors, we need different material designs and tools. A little device that harvests energy from a runner’s evening jog clearly is not designed for a massive bison, which can weigh up to a tonne. Personalized health care could revolutionize traditional medical practice,” Gao says.
Green Car Congress
FEBRUARY 5, 2010
Researchers from Imperial College London and their European partners, including Volvo Car Corporation, are developing a prototype multifunctional structural composite material composed of carbon fibers and a polymer resin which can store and discharge electrical energy and which is also strong and lightweight enough to be used for car parts.
Green Car Congress
MAY 11, 2012
Its capacity is 530 Wh and it can be fully recharged from a 230 V supply in two and a half hours. As an alternative it can be easily detached from the bike and replaced by a recharged battery. The frame and the swinging arm that holds the back wheel are made of carbon fiber-reinforced polymer (CFRP). lb) each.
Green Car Congress
JUNE 24, 2013
The XL1 is aggressively optimized for efficiency in all areas of its design and technology—from materials (carbon fiber reinforced polymer monocoque); to powertrain (0.8L Despite its aggressive design, the XL1 can still be considered a practical car. two-cylinder diesel, 20 kW electric motor and 5.5
Green Car Congress
JANUARY 13, 2016
Each motor powers one set of wheels—as on the technology demonstrator Audi A7 Sportback h-tron quattro (a plug-in hybrid design with an 8.8 Complementing the 110 kW fuel cell is a compact lithium-ion battery designed for optimum power output. —Siegfried Pint. kWh pack), which Audi presented in November 2014. Earlier post.)
Green Car Congress
FEBRUARY 2, 2013
When the final funding opportunity announcement is released following this public comment period, DOE will accept applications from industry, national laboratories, and university-led teams to address these challenges and enable technologies that drive innovation in vehicle design. Carbon Fiber Polymer Composite.
Green Car Congress
SEPTEMBER 11, 2011
The outer skin of the show car is made of carbon fiber-reinforced polymer (CFRP); the occupant cell is a mix of CFRP monocoque and an aluminum structure. Manufactured using cladding technology, the 21-inch wheels are very light and feature a variant of the blade design from the Audi e-tron models. mph) in 16.9
Expert insights. Personalized for you.
137 
Let's personalize your content